BLK BOX 50-0141 User manual

OWNERS MANUAL & QUICK START GUIDE
REVERSE HYPEREXTENSION
NOTE : PLEASE READ ALL THE INSTRUCTIONS
CAREFULLY BEFORE ASSEMBLING THIS PRODUCT.
BLK BOX
50-0141
#MADEINBELFAST
1268mmx912mmx1228mm
50kg
PRODUCT SPECIFICATION
PRODUCT WEIGHT
MAX USER WEIGHT
MAX USER
MAX TRAINING WEIGHT
DIMENSIONS
-
350kg
125kg
-
-
-
1
-

WARNING
SPIRIT LEVEL
TOOLS REQUIRED
17MM SPANNER X2
PARTS & ATTACHMENTS
No. Name SKU QTY
1 REVERSE HYPER SIDE 21-0833 2
2 REVERSE HYPER SIDE FRAME SIDE PLATE 21-0639 2
3REVERSE HYPER TOP 21-1001 1
4 REVERSE HYPER SINGLE BAR 21-0829 1
5 M10X80 HEX HEAD BOLT 10-0006 12
6 M10 WAHER 10-0019 24
7 M10 NYLOCK NUT 10-0024 12
1
2
SERIOUS OR FATAL INJURIES MAY OCCUR FROM INCORRECTLY ASSEMBLED EQUIPMENT. ALWAYS EN-
SURE BOLTS ARE TIGHTENED CORRECTLY AND ALL PARTS ARE LEVEL AND PLUMB. TO FURTHER RE-
DUCE RISK OF INJURIES OR DEATH PLEASE USE OUR SUGGESTED TOOLS AND PERSONAL PROTECTIVE
EQUIPMENT (PPE). WE SUGGEST THAT A MINIMUM OF THREE PEOPLE ARE INVOLVED IN THE ASSEMBLY
OF THIS PRODUCT. EACH PERSON SHOULD BE EQUIPPED WITH SAFETY GLASSES, STEEL TOE CAP BOOTS
AND EAR PLUGS.
PLEASE BE AWARE OF THIS SYMBOL AS AN INDICATION TO CHECK THAT A PART IS
LEVEL OR PLUMB.
THIS SYMBOL IS AN INDICATION OF THE RECOMMENDED TORQUE EACH
BOLT SHOULD BE TIGHTENED TO. THIS VALUE WILL BE DEPENDENT ON
THE BOLT TYPE. PLEASE HAND TIGHTEN ALL BOLTS UNTIL YOU SEE THIS SYMBOL.
#MADEINBELFAST
5
7
6
4
3
30
Nm

ASSEMBLY
1
BOLT 1QTY REVERSE HYPER SIDE (21-0833) AND 1QTY REVERSE HYPER SIDE FRAME SIDE
PLATE (21-0639) TO 1QTY REVERSE HYPER TOP (21-1001) WITH BOLT ASSEMBLIES AS
SHOWN BELOW. REPEAT ON OTHER SIDE.
ENSURE THE ORIENTATION OF SIDES ARE CORRECT.
#MADEINBELFAST
2BOLT 1QTY REVERSE HYPER SINGLE BAR (21-0829) TO 1QTY REVERSE HYPER SIDE
(21-0833) WITH BOLT ASSEMBLIES AS SHOWN BELOW.
BOLT ASSEMBLY FOR
EACH HOLE:
10.0006
10.0019 x2
10.0024
BOLT ASSEMBLY
FOR EACH HOLE:
10.0006
10.0019 x2
10.0024

#MADEINBELFAST
1:1 SCALE FASTENERS
FOR TERMS AND CONDITIONS VISIT OUR WEBSITE AT:
www.blkboxtness.com/pages/terms-conditions
GET IN TOUCH:
TEL: [phone]
EMAIL: info@blkboxtness.com
DISCOVER MORE AT:
www.blkboxtness.com
M10x80 BOLT
10-0006
NYLOCK NUT
10-0024
M10 FLAT WASHER
10-0019
3TIGHTEN ALL BOLT ASSEMBLIES TO 30NM AND ENSURE ALL ATTACHMENTS
ARE PLUMB.
30
Nm