BLK BOX 21-0208 User manual

OWNERS MANUAL & QUICK START GUIDE
WALL MOUNTED DOUBLE WALL BALL TARGET
NOTE : PLEASE READ ALL THE INSTRUCTIONS
CAREFULLY BEFORE ASSEMBLING THIS PRODUCT.
BLK BOX
PRODUCT SPECIFICATION
PRODUCT WEIGHT
DIMENSIONS
-9kg
-
21-0208
#MADEINBELFAST
540mm x 340mm x 72mm

WARNING
xx
Nm
10MM MASONRY
DRILL BIT
TOOLS REQUIRED
17MM SPANNER X2
HAMMER
PARTS & ATTACHMENTS
No. Name SKU QTY
1 WALL BALL TARGET 21-0224 1
2 M10X80 SLEEVE ANCHOR 10-0031 4
3 M10 FLAT WASHER 10-0019 4
3
2
SERIOUS OR FATAL INJURIES MAY OCCUR FROM INCORRECTLY ASSEMBLED EQUIPMENT. ALWAYS ENSURE
BOLTS ARE TIGHTENED CORRECTLY AND ALL PARTS ARE LEVEL AND PLUMB. TO FURTHER REDUCE RISK OF
INJURIES OR DEATH PLEASE USE OUR SUGGESTED TOOLS AND PERSONAL PROTECTIVE EQUIPMENT (PPE).
WE SUGGEST THAT A MINIMUM OF THREE PEOPLE ARE INVOLVED IN THE ASSEMBLY OF THIS PRODUCT.
EACH PERSON SHOULD BE EQUIPPED WITH SAFETY GLASSES, STEEL TOE CAP BOOTS AND EAR PLUGS.
THIS SYMBOL IS AN INDICATION OF THE RECOMMENDED TORQUE EACH
BOLT SHOULD BE TIGHTENED TO. THIS VALUE WILL BE DEPENDENT ON
THE BOLT TYPE. PLEASE HAND TIGHTEN ALL BOLTS UNTIL YOU SEE THIS SYMBOL.
#MADEINBELFAST
HAMMER DRILL
VACUUM
1
TAPE MEASURE
STEP LADDER

INSTALLATION
1
#MADEINBELFAST
MARK DRILLING LOCATIONS USING THE GUIDE BELOW.
THE ADVISED HEIGHTS WILL ENSURE THE TARGET IS MOUNTED THAT THE TOP WALL BALL
TARGET IS 10 FOOT HIGH, AND THE BOTTOM TARGET IS 9 FOOT.
HOLES ARE SPACED 300 MM APART.
2743 mm
3048 mm
300 mm

x
4
2
#MADEINBELFAST
30
Nm
DRILL HOLE VACUUM HAMMER IN
BOLT TIGHTEN
90MM
SLEEVE ANCHOR BOLT FITTING
-DRILL 10MM HOLE IN WALL, 90MM DEEP
USING PLATE AS A GUIDE.
-VACUUM OUT THE DUST.
-HAMMER SLEEVE ANCHOR INTO THE HOLE.
-TIGHTEN SLEEVE ANCHOR TO SPECIFIED
TORQUE USING 13MM SPANNER.
BOLT 1QTY WALL BALL TARGET (21-0224) TO THE WALL USING 4QTY SLEEVE ANCHOR BOLTS
(10-0031) AND 4QTY M10 WASHERS (10-0019)
DRILL HOLES AND MOUNT USING GUIDE AS SHOWN BELOW, TIGHTEN TO SPECIFIED TORQUE.
SKU QTY
10-0031 1
10-0019 1
30
Nm

1:1 SCALE FASTENERS
FOR TERMS AND CONDITIONS VISIT OUR WEBSITE AT
www.blkboxfitness.com/pages/terms-conditions
GET IN TOUCH
TEL: [phone]
EMAIL: [e-mail]
DISCOVER MORE AT:
www.blkboxfitness.com
#MADEINBELFAST
M10x80 SLEEVE ANCHOR
10-0031
M10 FLAT WASHER
10-0019