BROSA Hans 220cm Extendable Dining Table User manual

ASSEMBLY GUIDE
Hans 220cm Extendable Dining Table
v1.0

Components
Upon unpacking your table from it’s delivery box, you should have the
separate pieces shown below. Follow the steps on the next pages to assemble
your new table.
A x 4
(Cross Dowel)
B x 8
(Threaded Bolt)
C x 8
(Washer)
D x 8
(Lock Washer)
E x 8
(Hex Nut)
F x 1
(Spanner)
Hardware
What you need
Leg x 4Table top x 1 Extension Leaf x 1

Step 1 Insert the cross dowel (A) into the top hole of the leg
so that the side marker faces the bolt hole. Repeat
for all four legs.
Step 2 Screw two threaded bolts (B) into the corner holes.
Repeat for all four legs.
A x 4
B x 8
A
B
B

Step 3 Place the table top on a at surface with underside
facing up. Insert a leg construction formed in previ-
ous steps into a corner opening. Fit a washer (C), a
lock washer (D) then a hex nut (E) to the threaded
bold and tighten with the spanner (F). Repeat to
secure the second bolt. Repeat for the remaining
legs.
Turn the side lock up.
C x 8
D x 8
E x 8
F x 1
CD
EF

Step 4 Place the table on a at surface and enjoy your new
table!
Step 5 To extend the table, take the extension leaf out of the
storage bag and open the xing aps.

Step 6 Unlock the switch under the table top and slide two
parts apart.

Step 7 Insert the extension leaf into the formed space.
make sure the dowels are aligned correctly. Slide the
extension leaf towards one of the table top sides.
Slide the remaining side of the table top towards the
extension leaf and x the lock back.

Step 8 To switch back to the compact form unlock the
swith underneath the table top. Slide the sides apart
from each other. Take the separated extension leaf
out.

Step 9 Close the aps, place the extension leaf back into the
storage bag and close it.
Step 10 Hide the bag into the table top and close it.
Switch the lock back on.

Step 11 Enjoy your new table!