BROSA Caledonia Rattan Bedside Table User manual

Caledonia Rattan
Bedside Table
A S S E M B LY GU I D E
V1

FOR YOUR SAFETY
Lift, don’t drag. This protects
your floor and product.
Avoid loose screws. Tighten
fixtures every few months.
Assembly requires 2 people.
It's always easier with a
friend.
Contact our support online
or call 1300 027 672.
Check the assembly guide
for required components.
?
Assembling this product on
a soft surface protects its
finish.

Components
Before you get started, check you have all of the pieces below.
If anything’s missing, we’ll sort it out right away. Simply visit:
www.brosa.com.au/pages/product-return-and-parts-request
Hardware
A x 6
(M6 x 30)
B x 6
(M6 x 40)
C x 12
(Ø8 x Ø16)
D x 6
(Ø8 x Ø16)
E x 1
(M4)
Body x 1
①
Leg Frame x 2
②
Shelf x 1
③

Step 1 Fit the tongues of the shelf ③into the slots of
the leg frames ②. Make sure the stickers match
as per the diagram below.
②
②
③

Step 2 Fit a spring washer D to a long bolt B followed by
a flat washer C. Insert the long bolt into a hole on
the leg frame to fix the shelf. Screw the bolt with
your hand. Leave the bolt loosely attached.
Repeat this for the remaining holes on the leg
frames.
B x 6
C x 6
D x 6
C
B
D

Step 3 Align the structure formed in Step 2 with the
holes on the bottom of the body ①. Make sure
the stickers match as per the diagram below.
Fit a flat washer C to a short bolt A. Insert the bolt
into a hole on the leg frame. Screw the bolt with
your hand and leave it loosely attached. Repeat
this for all holes on the leg frames.
A x 6
C x 6
①
A
C

Step 4 Once the structure is built up, tighten all bolts
with the Allen key E.
E x 1
E
E

Step 5 Place the completed piece of furniture the right
way up in its desired location.
Adjust the foot stoppers to make all legs sit firmly
on the ground.

Step 6 Enjoy your new Caledonia Rattan Bedside Table!

Troubleshooting
Pull the drawer until the levers of the drawer slides come
out as shown in the zoomed-in diagram below.
Step 1
1. Follow the steps below to detach the drawer if needed.

Press down on the lever on one side and up on the
opposite side to disengage the mechanism. Pull the
drawer out while pressing the levers.
Step 2

Line up the slides and push until you hear the “click”
indicating that slides have reengaged.
Step 1
2. Follow the step below to attach your drawer again.

User Recommendation
Rattan is a natural material which is both durable and flexible. Most
rattan furniture only needs basic cleaning and care to preserve its
natural strength and colour. Follow these steps to keep your rattan
furniture looking beautiful for years to come and ensure its longevity.
Assembly
1. Assemble furniture using our Assembly Guides. You can find them at
support.brosa.com
2. Do not dispose of any packaging or contents of the shipping carton
until assembly is completed to avoid accidentally discarding small
parts or hardware.
3. Furniture can be dangerous if incorrectly assembled. Assembly
should be carried out by competent people.
Placement
1. This product is for indoor use only.
2. Keep furniture on flat, level ground. Placing it unevenly may cause
deformation.
3. Do not place heavy objects on furniture.
4. When repositioning furniture always lift, don’t drag.
5. Keep sharp objects away from furniture. They cause scratches and
splinters to the surface.
6. Do not stack furniture.
General Cleaning and Maintenance
1. Clean furniture regularly with a white soft cloth. Slightly damp fabrics
help absorb dust, but remember to dry it once you’re done.
2. Clean spills and stains immediately with a clean cloth. As long as
you’re on hand to wipe up any spills straight away, you shouldn’t
encounter any problems.
3. Keep liquids away as they may damage the finishing.
4. Avoid harsh cleaning chemicals such as alcohol or gasoline
solvents. Avoid using sponges or dirty cloths.
5. Cover furniture that isn’t being used to protect from dust and
ageing.
6. Re-tighten screws and attachments if they loosen.

7. Use protective coasters and mats for hot items on the furniture.
8. Keep furniture away from intense direct sunlight. Exposure can
cause cracks or discolouration.
9. Severe changes in temperature and humidity can accelerate ageing.
Keep furniture at least 60cm from heating or air conditioning.
10. Do not place furniture near open flames.
Rattan Cleaning and Maintenance
1. Clean rattan surfaces regularly. A monthly or even weekly cleaning
helps prevent dust from building up in crevices.
2. Use a vacuum with the brush attachment to remove loose dust and
debris from the crevices and cracks.
3. Use a toothbrush, cocktail stick or any other fine tool to remove
stubborn soil or debris.
4. Humidity may cause rattan webbing to go loose and bulge slightly. It
will eventually dry tight. Should the rattan webbing stay loose and look
stretched, wet the webbing with a damp cloth and dry out the piece in
a well-ventilated area. It helps restore the tightness.
5. If mildew or mould forms, mix bleach with water and use a scrub
brush to clean the affected area. Try not to saturate the rattan. Wipe
down the area with a fresh damp cloth to remove any bleach residue.
Allow the furniture to air dry.
6. Leaving the rattan webbing in its natural state allows the material to
breathe and gives maximum longevity.
7. Applying some linseed oil helps nourish rattan.
8. Occasionally inspect the rattan surface to identify any splinters or
broken webbing. Remove the splinters immediately to avoid any
injuries. If the breakage is significant, seek further advice by contacting
us directly.