BROSA Robinson Coffee Table With Shelf User manual

ASSEMBLY GUIDE
Robinson Coee Table With Shelf
v1.0

Components
Upon unpacking your coee table from its delivery box, you should have the
separate pieces shown below. Follow the steps on the next pages to assemble
your new coee table.
A x 16
Spec: Ø8 x 40mm
B x 8
Spec: 25 x 14 x 6mm
D x 8
Spec: Ø6 x 65mm
E x 1
Spec: M5
C x 8
Spec: Ø6 x 10 x 1.5mm
Hardware
What you need
1
2
3
3
3
3
4
Leg x 4
Table top x 1
Shelf x 1
Cross brace x 1

Step 1
A x 16
B x 8
C x 8
D x 8
E x 1
1.1 Insert dowels (A) into the holes on the cross
brace (2) and the shelf (4) as shown. Align a leg (3) to
the cross brace (2) and rmly press together. Repeat
for another leg (3). Align the shelf (4) to the legs
attched to the cross brace and rmly press together.
With another person holding the shelf level, align
the remaining two legs, one by one to the structure
and press together.
1.2 Fit a washer (C) to a bolt (D) followed by a plastic
cap (B) and screw into one of the holes of the cross
brace (2). Use the allen key (E) to tighten in place.
Repeat for the remaining bolts (D) for both the cross
brace (2) and the shelf (4).
A
BC
D
E
2
3
3
3
3
4
Step 1.1
Step 1.2

Step 2 Gently lift the structure formed in Step 1 and place
upright on a level surface. Carefully lower the table
top (1) on top of the structure.
Assembly is complete. Enjoy your new coee table!
1