BROSA Baker Extendable Dining Table User manual

ASSEMBLY GUIDE
Baker Extendable Dining Table
v1.0

1
4
2
5
36
Components
A x 4
(Dowel)
B x 6
(Steel Dowel)
C x 6
(Grub Screw)
D x 2
(Short Bolt)
E x 1
(M5 Allen key)
F x 1
(M4 Allen key)
G x 4
(Long Bolt)
Hardware
What you need
Leg x 2
Leg Base x 2
Rail x 1
Table top x 1
Extension
Leaf x 1
Storage
Bag x 1
Before you get started, check you have all of the pieces below. If anything’s
missing, please visit www.brosa.com.au/pages/product-return-and-parts-request
and we’ll sort it out right away.
Storage bag

Step 1 Insert two dowels (A) into the diagonal holes of the
leg (2). Repeat this for the second leg.
A x 4
2
A
Step 2 Align a leg (2) with the leg base (3). Fit the parts
together and secure them with long bolts (G) using
the small Allen key (F).
F x 1
G x 4
2
G
F
3

Step 3 3.1 Screw a steel dowel (B) into the embedded nut
which is in the slot of the leg base. Ensure that the
hole is oriented as below diagram indicates. Repeat
this for the other base.
3.2 Screw two steel dowels (B) into the embedded
nuts on top of the leg. Ensure that the holes are
oriented as below diagram indicates. Repeat for the
other leg.
B x 6
B
B
Step 3.1
Step 3.2

Step 4 Fit the formed leg structure to the rail (4) with the
steel dowels inserted into the holes on the side.
Make sure the holes on the rail are facing down.
Secure them with grub screws (G) using the big
Allen key (E).
C x 2
4
E
C
E x 1

Step 5 5.1 Place the table top (1) on a level surface with
bottom facing up and turn the runner lock on.
5.2 Align formed leg structure with the table top and
secure it with grub screws (C) using the big Allen key
(E).
5.3 Insert a short bolt (D) into the side hole and
secure it using the small Allen key (F). Repeat this for
the other side.
C x 4
E x 1
F x 1
D x 2
1
C
C
E
DF
Step 5.1
Step 5.2
Step 5.3

Step 6 To extend the table, take the extension leaf (5) out of
the storage bag (6).
Step 7 Unlock the runner locks and metal locks under the
table top and slide two parts apart.
5
6
Storage bag

Step 8 Insert the extension leaf into the formed space.
Make sure the dowels are aligned correctly. Slide the
extension leaf towards one half of the table top.
Slide the remaining half of the table top towards the
extension leaf and x all the locks back.

Step 9 Reverse the process above to switch the table to the
compact form.
Step 10 Place the extension leaf back into the storage bag
and close it.
Storage Bag
Storage bag

Step 11 Place the bag upon the rails of the table top and
close it.
Switch the locks back on.