BROSA Calypso Electric Recliner User manual

Calypso
Electric Recliner
A S S E M B LY GU I D E
V1

FOR YOUR SAFETY
Lift, don’t drag. This protects
your floor and product.
Avoid loose screws. Tighten
fixtures every few months.
Assembly requires 2 people.
It's always easier with a
friend.
Contact our support online
or call 1300 027 672.
Check the assembly guide
for required components.
?
Assembling this product on
a soft surface protects its
finish.

Safety
1. Read and follow all the instructions and warnings in this guide
carefully before attempting to operate the recliner for the first time.
Failure to follow the guide may result in injuries, product damage and
will void your warranty.
2. The recliner has to be placed within 3.8 meters of the power outlet.
3. Ensure the recliner is clear of walls, furniture and other obstructions
that may interfere with a clear path for operation.
4. The recliner has a maximum weight capacity of 150kg. Staying within
the weight limit keeps you safe from injuries and product damage.
5. The recliner is not suitable for adults and children with physical,
sensory or mental challenges. Please always provide supervision and
instructions for persons with disabilities.
6. Children should be supervised to ensure that they do not play on
the recliner or with the controls.
7. Ensure that all the cords are kept clear of the mechanism under the
seat.
8. The recliner is only to be used with the electrical components
provided. If any component is damaged, contact us directly.
9. Keep hands and feet clear of the mechanism when operating the
controls.
10. Keep children and pets away from all moving parts while operating
the recliner.
11. Always leave the recliner in an upright and closed position after use.
12. Do not get out of the recliner while the footrest is extended.
Footrest must be closed before getting out of or into the seat.
13. Do not sit on the armrests of the recliner.

Components
Before you get started, check you have all of the pieces below.
If anything’s missing, we’ll sort it out right away. Simply visit:
www.brosa.com.au/pages/product-return-and-parts-request
④Power Supply x 1 ⑤Extension Cord x 1
(2.5m)
⑥Power Cord x 1
(1.2m)
③Leg x 4
①Chair Base x 1 ②Backrest x 1
Hardware
A x 16 B x 1

Step 1 Open the box from the bottom. Follow the red
string to locate the box of the power supply, cords,
legs and hardware. Use a pair of scissors to release
them from the nylon strips.
⑤
⑥
④
③
A x 16 B

Step 2 Align a leg ③ with the holes on the bottom of the
chair base. Insert the bolts A into the holes to fix
the leg in place. Tighten the bolts with the Allen key
B.
③
A
B

Step 3 Flip the chair base ① the right way up. Remove the
protectors from the metal arms at the back of the
chair base.
①

Step 4 With assistance of a friend, hold up the backrest ②
and stand at the back of the chair base.
Carefully align the sleeves on the inner sides of the
backrest with the metal arms. Push the backrest
downwards firmly until it is fully slotted and locked
into position.
②

Step 5 Smooth down the fabric flap on the back of the
backrest. Run your fingers along the bottom edge of
the chair to allow the Velcro tape to adhere.

Step 6 Locate the male plug at the back of the chair.
Grab the extension cord ⑤ and pick the female
plug with the cap.
Flip up the cap and connect the plug to the male
plug firmly. Flip down the cap and hook it to the
knobs on the male plug.
⑤