BROSA Bowen Bar Table User manual

ASSEMBLY GUIDE
Bowen Bar Table
v1.0

Components
Upon unpacking your bar table from it’s delivery box, you should have the
separate pieces shown below. Follow the steps on the next pages to assemble
your new bar table.
Table top x 1
Cross brace x 3
Leg x 2
Frame x 1
1
3
4
4
2
Hardware What you need
3
A x 4
Spec: M6 x 40mm
C x 8
Spec: M8 x 16mm
B x 4
Spec: M6 x 16mm
D x 10
Spec: M5 x 30mm
E x 1
Spec: M6
F x 1
Spec: M8
G x 4
Spec: Ø25 x Ø18 x 25mm

Step 1 1.1 Align the top cross brace (4) to a leg (3) tting them
together and repeat for the other leg (3). Insert a bolt (C)
in each of the holes top and bottom using the allen key
(F) to tighten in place.
1.2 Align the lower cross brace (4) to the legs (3) and
secure in place using bolts (A). Repeat for the second
lower cross brace (4) and use the allen key (E) to tighten
the bolts (A).
1.3 Insert a oor grip (G) in the bottom of each leg by
screwing into place.
C x 8
E x 1
F x 1
G x 4
A x 4
3
3
4
4
A
E
C
F
G
Step 1.1
Step 1.2
Step 1.3

B x 4
D x 10
Step 2
Step 3
Align the frame (2) to the underside of the table top (1)
and secure in place with screws (D).
Align the table top (1) to the leg frame formed in Step 1
and secure in place using bolts (B) and allen key (E).
1
2
D
B
E
1
E x 1

Step 4 Assembly is complete. Enjoy your new bar table!