BROSA Smeaton Small Outdoor Dining Table User manual

ASSEMBLY GUIDE
Smeaton Small Outdoor Dining Table
v1.0

Components
Before you get started, check you have all of the pieces below. If anything’s
missing, please visit
www.brosa.com.au/pages/product-return-and-parts-request and we’ll sort it
out right away.
Table Top x 1
Leg x 4
Supporting Frame x 1
Hardware
What you need
A x 12
(M8 x 15)
B x 12 C x 1
(M4)
1
2
3

Step 1 Align a leg (3) with the supporting frame (2) so that
the bolt holes overlap. Fit a washer (B) to a bolt (A)
and then insert the bolt into the hole. Secure the bolt
with the Allen key (C) but do not tighten it yet.
Repeat this for the other hole and then repeat the
whole process for the remaining legs.
A x 8
B x 8
C x 1
2
3
A
B
C

Step 2 Align the structure formed in Step 1 with the table
top (1). Make sure the bolt holes overlap. Fit a
washer (B) to a bolt (A) and then insert the bolt into
the hole. Secure the bolt with the Allen key (C) but
do not tighten it yet. Repeat this for the remaining
holes.
A x 4
B x 4
C x 1
1A
B
C

Step 3 Tighten all bolts using the Allen key (C).
C x 1
CC

Step 4 Place the table upright on a level surface. Enjoy your
new outdoor dining table!