BROSA Ethan Wide Chest of Drawers User manual

ASSEMBLY GUIDE
Ethan Wide Chest of Drawers

Components
Upon unpacking your chest from it’s delivery box, you should have the pieces shown below.
Follow the steps on the next pages to assemble your new chest.
15MIN
x 1
Drawer Box Unit
Leg

Step 1
A x 4
1.1 Insert cross dowels (A) into the legs (2) by placing each
dowels (A) into the holes on top of each leg (2). Ensure the
horizontal marking on each dowel (A) is facing as shown.
1.2 Screw threaded bolts (B) into dowels (A) that are already
concealed in the legs (2) as shown until they are securely
fastened.
Fitting
B x 4
Step 1.1
Step 1.2

Step 2
C x 8
C x 8
D x 8
F x 1
2.1 Lay drawer box unit (1) on a surface. Attach each leg (2)
into place by inserting threaded bolt (B) through the
pre-drilled hole of each metal corner bracket as shown.
2.3 Insert in order the at washer (C), lock washer (D), and hex
nut (E) onto threaded bolt (B) on leg (2) as shown.
2.4 Tighten hex nut (D) using spanner (F) as shown. Continue
to re-tighten hex (D) nut until it is securely fastened.
Step 2.2
Step 2.3 & 2.4
Step 2.1
Step 2.2 & 2.3

Step 3 With help of assistant, stand the unit upright.
Enjoy your new drawer!