Cas Ci-2001as User manual

CI-2001AS/BS

Weighing Indicator

OWNER’S MANUAL

CONTENTS

PRECAUTIONS 4

INTRODUCTION 6

THE FEATURES OF CI-2001AS/CI-2001BS 6

TECHNICAL SPECIFICATION 7

DIMENSIONS 8

FRONT PANEL(CI-2001AS) 9

FRONT PANEL(CI-2001BS) 11

CONNECTING THE CABLE 13

TEST MODE 14

CALIBRATION MODE 17

SET MODE 20

SERIAL INTERFACE 24

ERROR MESSAGE & TROUBLE SHOOTING 28

5

?

@@@@@@@@@@@@g?

?

Do not subject the scale to sudden

temperature changes.

?

@@@@@@@@@@@@g?

?

Keep the scale away from strong EMI noises may cause incorrect weight

readings.

4

PRECAUTIONS

?

@@@@@@@@@@@@g?

?

Place the indicator on a flat and stable

surface.

?

@@@@@@@@@@@@g?

?

Do not use inflammable materials in

cleaning.

?

@@@@@@@@@@@@g?

?

Do not severely press because the light

pressing of keys can incite the operation.

?

@@@@@@@@@@@@g?

?

Keep the main body from rain and

keep in dry area.

7

TECHNICAL SPECIFICATION

DC 5V, up to 4 350 load cells

20mV, including dead load

0.05mV 5mV

2 V/D(H-44, OIML)

0.5 V/D(Non H-44, OIML)

Within 0.01% of FS

Approximately 200,000 counts

5,000dd(H-44, OIML)

30,000dd(Non H-44, OIML)

10 times/sec

Load cell excitation

voltage

Full scale input signal

Zero adjust range

Input sensitivity

System linearity

A/D internal resolution

A/D external resolution

A/D conversion speed

Analog Part

6

INTRODUCTION

THE FEATURES OF CI-2001AS/CI-2001BS

We greatly appreciate your purchase of the CAS industrial indicator. These

goods have hold excellent performance and splendid properties through strike

tests as well as devoting ourselves under severe quality management.

CAS indicator(CI-series) is shaped firmly and delicately designed a coincide

with the special requirements of several industrial fields and includes many

functions and various external interfaces. Also, it is programmed on the basic of

the user’s convenience and contains help display functions to be used easily.

Before using CI-2001AS/BS, It is recommended to read this manual carefully

and to apply the function application fully.

1. Features

?

@@@@@@@@@@@@g?

?

Appropriate for weight and measurement system

?

@@@@@@@@@@@@g?

?

Easy operation and various functions

?

@@@@@@@@@@@@g?

?

Simple full digital calibration

(SPACTM:Single pass automatic span calibration)

?

@@@@@@@@@@@@g?

?

Watchdog circuitry(System restoration)

?

@@@@@@@@@@@@g?

?

Wall mount type(CI-2001AS/BS)-Standard

2. Main Function

?

@@@@@@@@@@@@g?

?

Various specification of weight conversion speed(Digital filter function)

?

@@@@@@@@@@@@g?

?

Various printer connection(RS232 Serial printer)

?

@@@@@@@@@@@@g?

?

Users can set the desirous max. weight and a division freely

?

@@@@@@@@@@@@g?

?

Self hardware test

Prompt A/S is available for test of each part of circuit by module is possible

Full Digital Calibration: SPACTM

(Single pass automatic span calibration)

CI-2001AS LED(6 digit)

CI-2001BS LCD(5 digit)

CI-2001AS 25mm(Height)

CI-2001BS 25mm(Height)

“

-

” minus signal

CI-2001AS Zero, Tare, Gross, Net, Stable

CI-2001BS Zero, Net, Stable

AC 110V/220V, 50/60Hz(DC 12V, 500mA)

CI-2001AS 10W

CI-2001BS 1W

-10°C 40°C

200mm 130mm 53mm

2kg

Span calibration

Display

Size of letter

Display below zero

Additional symbols

AC adapter

Power consumption

Operating temperature

Overall dimensions

Weight

Digital Part

9

Serial Interface: RS-422/485

Inner Clock

Built in Battery

Option-1

Option-2

Option-3

Option Part

DIMENSIONS

CI-2001AS/BS Wall Mount Type

53

70

200

240

130

165

CI-2001AS CAPACITY:

8

FRONT PANEL(CI-2001AS)

CI-2001AS CAPACITY:

1. Display Lamp( )

?

@@@@@@@@@@@@g?

?

STABLE lamp: ON when the weight is stable.

?

@@@@@@@@@@@@g?

?

GROSS lamp: ON when the current weight is GROSS weight.

?

@@@@@@@@@@@@g?

?

NET lamp: ON when the current weight is NET weight.

?

@@@@@@@@@@@@g?

?

TARE lamp: ON when the tare weight is stored.

?

@@@@@@@@@@@@g?

?

ZERO lamp: ON when the current weight is 0kg(0lb).

2. Keyboard

Available keys instead of numeric keys.

: Change the set value

Increase the first place value to 1

: Change the digit of the set value

Move to the left by 1 place

USAGE: Input the numeral value in TEST, CAL, SET mode.

Return the display to 0.

Use container in weighing.

Current weight is memorized as tare weight.

If you press TARE key in unload condition, tare setting is released.

ZERO

TARE

11

10

Display gross and net weight by turn.

GROSS lamp on - gross weight

NET lamp on - net weight

In case tare weight is REGISTERED, tare and item’s total weight is G. weight

and only item’s weight is N. weight.

(CI-2001AS kg only version)

?

@@@@@@@@@@@@g?

?

PRINT key

?

@@@@@@@@@@@@g?

?

Total Print key

(by pressing “PTINT” key more than 3 second.)

(CI-2001AS kg/lb conversion version)

Toggles between lb and kg units

?

@@@@@@@@@@@@g?

?

PRINT key(CI-2001AS kg only version)

- Total Print key

(by pressing “PRINT” key more than 3 second.)

?

@@@@@@@@@@@@g?

?

Total PRINT key(CI-2001AS kg/lb conversion version)

?

@@@@@@@@@@@@g?

?

HOLD key

?

@@@@@@@@@@@@g?

?

In CALIBRATION, TEST, SET mode.

: Store current condition and exit.

3. How to enter TEST mode

?

@@@@@@@@@@@@g?

?

Press the “On/Off” key while pressing the “PRINT” key and TEST mode starts.

(CI-2001AS kg only version)

?

@@@@@@@@@@@@g?

?

Press the “On/Off” key while pressing the “kg/lb” key and TEST mode starts.

(CI-2001AS kg/lb conversion version)

4. How to enter SET mode

?

@@@@@@@@@@@@g?

?

Press the “On/Off” key while pressing the “ENTER” key and SET mode starts.

5. How to enter CAL mode

?

@@@@@@@@@@@@g?

?

Press the “On/Off” key while pressing the CAL switch on the rear panel of the

indicator and CAL mode starts.

GROSS/NET

PRINT

ENTER

kg/lb

FRONT PANEL(CI-2001BS)

CI-2001BS CAPACITY:

1. Display Lamp( )

?

@@@@@@@@@@@@g?

?

kg lamp: ON when the weight unit is kilogram [kg].

?

@@@@@@@@@@@@g?

?

lb lamp: ON when the weight unit is pound [lb].

?

@@@@@@@@@@@@g?

?

STABLE lamp: ON when the weight is stable.

?

@@@@@@@@@@@@g?

?

NET lamp: ON when the current weight is NET weight.

?

@@@@@@@@@@@@g?

?

ZERO lamp: ON when the current weight is 0kg(0lb).

2. Keyboard

Available keys instead of numeric keys.

: Change the set value

Increase the first place value to 1

: Change the digit of the set value

Move to the left by 1 place

USAGE: Input the numeral value in TEST, CAL, SET mode.

Return the display to 0.

Use container in weighing.

Current weight is memorized as tare weight.

If you press TARE key in unload condition, tare setting is released.

ZERO

TARE

13

12

Display gross and net weight by turn.

GROSS lamp on - gross weight

NET lamp on - net weight

In case tare weight is REGISTERED, tare and item’s total weight is G. weight

and only item’s weight is N. weight.

(CI-2001BS kg only version)

?

@@@@@@@@@@@@g?

?

PRINT key

?

@@@@@@@@@@@@g?

?

Total Print key

(by pressing “PTINT” key more than 3 second.)

(CI-2001BS kg/lb conversion version)

Toggles between lb and kg units

?

@@@@@@@@@@@@g?

?

PRINT key(CI-2001BS kg only version)

- Total Print key

(by pressing “PRINT” key more than 3 second.)

?

@@@@@@@@@@@@g?

?

Total PRINT key(CI-2001BS kg/lb conversion version)

?

@@@@@@@@@@@@g?

?

HOLD key

?

@@@@@@@@@@@@g?

?

LCD manual back light key

?

@@@@@@@@@@@@g?

?

In CALIBRATION, TEST, SET mode.

: Store current condition and exit.

3. How to enter TEST mode

?

@@@@@@@@@@@@g?

?

Press the “On/Off” key while pressing the “PRINT” key and TEST mode starts.

(CI-2001BS kg only version)

?

@@@@@@@@@@@@g?

?

Press the “On/Off” key while pressing the “kg/lb” key and TEST mode starts.

(CI-2001BS kg/lb conversion version)

4. How to enter SET mode

?

@@@@@@@@@@@@g?

?

Press the “On/Off” key while pressing the “ENTER” key and SET mode starts.

5. How to enter CAL mode

?

@@@@@@@@@@@@g?

?

Press the “On/Off” key while pressing the CAL switch on the rear panel of the

indicator and CAL mode starts.

GROSS/NET

PRINT

ENTER

kg/lb

CONNECTING THE CABLE

?

@@@@@@@@@@@@g?

?

DC ADAPTER(0V, +12V): Port for DC power.

DC 12V adapter is available

?

@@@@@@@@@@@@g?

?

RS-485 Interface(485_SIG+, 485_SIG-):

Serial interface port.(Computer ...)

?

@@@@@@@@@@@@g?

?

RS-232 Interface(232_RXD, 232_TXD, GND):

Serial interface port.(Computer, Printer, Remote Display)

?

@@@@@@@@@@@@g?

?

LOAD CELL(Ex+, Ex-, Sig+, Sig-, GND):

Port for connecting load cell.

Legal seal installed

?

@@@@@@@@@@@@g?

?

Install the seal on the wire loop as shown in below figure.

Cal Switch Plate

Legal Seal Rear Cover

Sealing Bolt

15

14

TEST MODE

1. How to Enter

Press the power while pressing the “PRINT” key and TEST menu starts.

(CI-2001AS/BS kg only version)

Press the power while pressing the “kg/lb” key and TEST menu starts.

(CI-2001AS/BS kg/lb conversion version)

2. Available Keys

Increase the first place set value to 1.

Move to the left by 1 place of the set value.

Initial(‘0’) of the set value. (CI-2001AS/BS kg type)

Initial(‘0’) of the set value. (CI-2001AS/BS kg/lb)

Move into next menu.

3. TEST Menu(TEST 1 - TEST 5)

TEST 1 : Key test

TEST 2 : LED/LCD display test

TEST 3 : Load cell test and A/D conversion test

TEST 4 : Serial interface test(RS-232)

TEST 5 : Printer test

TEST 1

?

@@@@@@@@@@@@g?

?

Function: Key test

Key Display Description

ENTER: Next menu

Other keys: Perform

test

TEST 1 condition.

Press the key to be tested and the No, and

code of the key is displays.

Key mode should be identify with code of

key like above.

PRINT

ENTER( )

kg/lb

CI-2001AS/BS kg only version

Key Code

ZERO 2

TARE 3

G/N 4

PRINT 5

ENTER 6

CI-2001AS/BS kg/lb version

Key Code

ZERO 2

TARE 3

G/N 4

kg/lb 5

ENTER 6

Key list

TEST 2

?

@@@@@@@@@@@@g?

?

Function: LED/LCD display test

Key Display Description

Displaying all lamps

of key

TEST 2 condition.

TEST 2 is performed automatically after

3 seconds or so.

Key Display Description

ENTER: Next menu

Other keys: Perform

test

Digital

converted

value

TEST 3 condition.

Display digital value of current weight.

This value means converted digital value.

@6K?

@@@6X?hg

@@@@)Khg

@@@@@@6Xhf

@@@@@@@)K?he

@@@@@@@@@6K?h

@@@@@@@@@@@6X?g

@@@@@@@@@@@@)Kg

@@@@@@@@@@@@@@6Xf

@@@@@@@@@@@@@@@,f

@@@@@@@@@@@@@@0Yf

@@@@@@@@@@@@(Mg

@@@@@@@@@@@0Y?g

@@@@@@@@@0M?h

@@@@@@@(M?he

@@@@@@0Yhf

@@@@(Mhg

@@@0Y?hg

@0M?

REF 1. Program is automatically shifted to test 3 after completing Test 2.

TEST 3

?

@@@@@@@@@@@@g?

?

Function: A/D converter test(L/C test)

@6K?

@@@6X?hg

@@@@)Khg

@@@@@@6Xhf

@@@@@@@)K?he

@@@@@@@@@6K?h

@@@@@@@@@@@6X?g

@@@@@@@@@@@@)Kg

@@@@@@@@@@@@@@6Xf

@@@@@@@@@@@@@@@,f

@@@@@@@@@@@@@@0Yf

@@@@@@@@@@@@(Mg

@@@@@@@@@@@0Y?g

@@@@@@@@@0M?h

@@@@@@@(M?he

@@@@@@0Yhf

@@@@(Mhg

@@@0Y?hg

@0M?

REF 1. A/D converter test is automatically completed by displaying converted

digital value of current weight.

REF 2. L/C test is also completed by loading the weight on the platform.

Check whether digital value is changing.

If the digital value is fixed or zero is displayed, please check the connection

of the load cell.

17

16

Key Display Description

ZERO: Transmit ‘1’

TARE: Transmit ‘2’

G/N: Transmit ‘3’

PRINT: Transmit ‘4’

ENTER: Next menu

TEST 4 condition.

Wait for transmission and reception.

Receive: 1, Transmit: none

Receive: 1, Transmit: 13

TEST 4

?

@@@@@@@@@@@@g?

?

Function: RS-232 test with computer

Key Display Description

ENTER: Exit test

mode

Other keys: Perform

test

TEST 5 condition.

No error in printer.

Check printer connector.

Key Display Description

: Increase of no.

: Shift of digit

ENTER:

Store and move into

next menu

Program version.

CAL 1 condition.

100kg(lb)

TEST 5

?

@@@@@@@@@@@@g?

?

Function: Printer test

@6K?

@@@6X?hg

@@@@)Khg

@@@@@@6Xhf

@@@@@@@)K?he

@@@@@@@@@6K?h

@@@@@@@@@@@6X?g

@@@@@@@@@@@@)Kg

@@@@@@@@@@@@@@6Xf

@@@@@@@@@@@@@@@,f

@@@@@@@@@@@@@@0Yf

@@@@@@@@@@@@(Mg

@@@@@@@@@@@0Y?g

@@@@@@@@@0M?h

@@@@@@@(M?he

@@@@@@0Yhf

@@@@(Mhg

@@@0Y?hg

@0M?

REF 1. Do this test after the connection between serial port of computer and serial

port of indicator.

REF 2. Send No.1 in computer keyboard and check if indicator receives No.1.

Send No.1 in indicator keyboard and check if computer receives No.1.

REF 3. Do this test after baud rate is specified in SET mode(F11).

?/X?@@?W&?e

?V/T@@T&5?e

S@UV@@f

?@@R@@@@1?e

?@@X@@T@@?e

S@@S@Uf

?W&@@@R/X?e

?&0?4@?V/?e

INDICATOR TEST(when it isn’t connected with PC)

1) Connect directly between No.2(TXD) and No.3(RXD) in indicator of serial port.

2) If transmitting data is identical with receiving data by pressing key of front panel,

this test will be done.

@6K?

@@@6X?hg

@@@@)Khg

@@@@@@6Xhf

@@@@@@@)K?he

@@@@@@@@@6K?h

@@@@@@@@@@@6X?g

@@@@@@@@@@@@)Kg

@@@@@@@@@@@@@@6Xf

@@@@@@@@@@@@@@@,f

@@@@@@@@@@@@@@0Yf

@@@@@@@@@@@@(Mg

@@@@@@@@@@@0Y?g

@@@@@@@@@0M?h

@@@@@@@(M?he

@@@@@@0Yhf

@@@@(Mhg

@@@0Y?hg

@0M?

REF 1. “GOOD” message is displayed if the printer connection and specification is

done correctly. If or not, “ERR 06” message is displayed.

REF 2. The test output format of printer is like follows.

If you press the enter key, it will be returned to NORMAL MODE.

However, only when it is connected with printer, this test can be performed.

TEST OK

CALIBRATION MODE

1. How to Enter

Press the power while pressing the CAL switch on the rear panel of the indicator

and CAL mode starts.

2. Available Keys

Increase the first place set value to 1.

Move to the left by 1 place of the set value.

Initial(‘0’) of the set value. (CI-2001AS/BS kg type)

Initial(‘0’) of the set value. (CI-2001AS/BS kg/lb)

Move into next menu.

3. CALIBRATION Menu(CAL 1 - CAL 5)

CAL 1 : Maximum capacity

CAL 2 : Minimum division

CAL 3 : Setting weight

CAL 4 : Zero calibration

CAL 5 : Span calibration

CAL 1

?

@@@@@@@@@@@@g?

?

Function: Maximum capacity set

Range 1 999,999kg/lb(CI-2001AS)

1 99,999kg/lb(CI-2001BS)

PRINT

ENTER( )

kg/lb

Maximum capacity

value

@6K?

@@@6X?hg

@@@@)Khg

@@@@@@6Xhf

@@@@@@@)K?he

@@@@@@@@@6K?h

@@@@@@@@@@@6X?g

@@@@@@@@@@@@)Kg

@@@@@@@@@@@@@@6Xf

@@@@@@@@@@@@@@@,f

@@@@@@@@@@@@@@0Yf

@@@@@@@@@@@@(Mg

@@@@@@@@@@@0Y?g

@@@@@@@@@0M?h

@@@@@@@(M?he

@@@@@@0Yhf

@@@@(Mhg

@@@0Y?hg

@0M?

REF 1. The maximum capacity means the maximum weight that scale can measure.

19

18

Key Display Description

: Input the next

division

ENTER:

Store and move into

next menu

CAL 1 condition.

0.01kg(lb)

CAL 2

?

@@@@@@@@@@@@g?

?

Function: Minimum division set

Range 0.0005 100kg/lb

CAL 4

?

@@@@@@@@@@@@g?

?

Function: Zero calibration

Minimum division

value

Key Display Description

: Increase of no.

: Shift of digit

ENTER:

Store and move into

next menu

CAL 3 condition.

100kg(lb)

Setting weight

@6K?

@@@6X?hg

@@@@)Khg

@@@@@@6Xhf

@@@@@@@)K?he

@@@@@@@@@6K?h

@@@@@@@@@@@6X?g

@@@@@@@@@@@@)Kg

@@@@@@@@@@@@@@6Xf

@@@@@@@@@@@@@@@,f

@@@@@@@@@@@@@@0Yf

@@@@@@@@@@@@(Mg

@@@@@@@@@@@0Y?g

@@@@@@@@@0M?h

@@@@@@@(M?he

@@@@@@0Yhf

@@@@(Mhg

@@@0Y?hg

@0M?

REF 1. The minimum division means the value of one division.

REF 2. External resolution is obtained by division the min. division by the

maximum capacity. Set the resolution to be within 1/30,000.

CAL 3

?

@@@@@@@@@@@@g?

?

Function: Setting weight in span calibration

Range 1 999,999kg/lb(CI-2001AS)

1 99,999kg/lb(CI-2001BS)

@6K?

@@@6X?hg

@@@@)Khg

@@@@@@6Xhf

@@@@@@@)K?he

@@@@@@@@@6K?h

@@@@@@@@@@@6X?g

@@@@@@@@@@@@)Kg

@@@@@@@@@@@@@@6Xf

@@@@@@@@@@@@@@@,f

@@@@@@@@@@@@@@0Yf

@@@@@@@@@@@@(Mg

@@@@@@@@@@@0Y?g

@@@@@@@@@0M?h

@@@@@@@(M?he

@@@@@@0Yhf

@@@@(Mhg

@@@0Y?hg

@0M?

REF 1. The weight shall be within the range of 1% 100% of maximum weight.

REF 2. If the setting weight is under the 1% of the maximum capacity.

Error message(“ERR 22”) will occur.

REF 3. If the setting weight over the maximum capacity.

Error message(“ERR 23”) will occur.

Key Display Description

ENTER:

Zero calibration and

move into next

menu

CAL 4 condition.

Unload the tray and press ENTER.

Under zero calibration.

Zero calibration is completed.

Key Display Description

ENTER:

Span calibration and

move into next

menu

CAL 5 condition.

Load the weight which was set in CAL 3 and

press ENTER.

Under span calibration.

Span calibration is completed.

Remove the setting weight.

Press the “ENTER” key to save the value.

@6K?

@@@6X?hg

@@@@)Khg

@@@@@@6Xhf

@@@@@@@)K?he

@@@@@@@@@6K?h

@@@@@@@@@@@6X?g

@@@@@@@@@@@@)Kg

@@@@@@@@@@@@@@6Xf

@@@@@@@@@@@@@@@,f

@@@@@@@@@@@@@@0Yf

@@@@@@@@@@@@(Mg

@@@@@@@@@@@0Y?g

@@@@@@@@@0M?h

@@@@@@@(M?he

@@@@@@0Yhf

@@@@(Mhg

@@@0Y?hg

@0M?

REF 1. If zero calibration is done without any error, GOOD message is displayed

and program moves into CAL 5 automatically.

REF 2. If the “ZERO” key is press, only zero calibration is completed and program

moves SAVE & EXIT mode. Press ENTER key.

CAL 5

?

@@@@@@@@@@@@g?

?

Function: Span calibration

@6K?

@@@6X?hg

@@@@)Khg

@@@@@@6Xhf

@@@@@@@)K?he

@@@@@@@@@6K?h

@@@@@@@@@@@6X?g

@@@@@@@@@@@@)Kg

@@@@@@@@@@@@@@6Xf

@@@@@@@@@@@@@@@,f

@@@@@@@@@@@@@@0Yf

@@@@@@@@@@@@(Mg

@@@@@@@@@@@0Y?g

@@@@@@@@@0M?h

@@@@@@@(M?he

@@@@@@0Yhf

@@@@(Mhg

@@@0Y?hg

@0M?

REF 1. If span calibration is done without any error, GOOD message is displayed

the weight of setting weight is displayed on display screen.

Check the weight.

REF 2. If the span is low, error message(ERR 24) is displayed.

Calibrate with lower resolution.

REF 3. After setting the exact value, remove the setting weight and press the

“ENTER” key to save the value.

CAS CI-2001AS User manual

Popular Accessories manuals by other brands