CDN ProAccurate Insta-Read IRB220-F-6.5 User manual

Perfect For
• Large frothing pitchers
Easy To Use
• 1.5"/3.8 cm magnied dial
• Target range indication
• Calibration tool on sheath
• Temperature and recalibration guides
• Adjustable stainless steel clip
Features
• NSF® approved
• 6.5"/16.5 cm stem
• Waterproof
• Shatterproof
• Polycarbonate lens
• Stainless steel housing
• Recalibratable
• Sheath can be used as handle extension
• Pocket clip
Get Professional Results
Every Time!
• The IRB220-F-6.5 measures the temperature of
beverages and frothed milk quickly and accurately.
• A computer-designed stainless steel clip holds
the thermometer stem snuggly against any
container. A positive lock, quick-release action,
permits the thermometer stem to be adjusted
to the desired height.
• When the clip is removed from the stem, this
INSTA-READ® thermometer can be used for all
general purpose cooking needs.
• Temperature and recalibration guides are also
available at www.cdn-timeandtemp.com
Note: Clean the thermometer stem before each use.
Important: DO NOT LEAVE IN HOT OVEN OR
MICROWAVE.
Recalibration Guide
Immerse thermometer in sheath in at least
2 inches of ice (34°F) or boiling water (212°F at sea
level). Adjust hex nut beneath dial with calibration
tool on sheath to 34 or 212°F.
Adjustable Stainless Steel Clip
CAUTION: Always position the IRB220-F-6.5 on the
pitcher/pot before lling it and/or applying heat.
Insert the stem through both holes
in the attachment clip. Press the top
portion of the clip together for easier
sliding up the thermometer stem.
Push the clip down onto the side of the
pot and position it until the stem tip
is just above the bottom.
Important: Keep stem away from direct heat of the cooktop
burner.
Model: IRB220-F-6.5
ProAccurate® Insta-Read®
Beverage & Frothing Thermometer
6.5" Stem
0 to 220°F/-18 to +104°C
100
100
120
140
160
180
200
220
80
80
60
60
40
40
20
20
0
0
–10
10
30 50
70
90
�F
�C
IRB220-F-6.5
Accepted for
commercial use
TEMPERATURE GUIDE
Steamed Milk . . . . . . . . 150–170°F . . 66–77°C
Espresso . . . . . . . . . . . . 185–194°F . . 85–90°C
Black Tea . . . . . . . . . . . . . . . 212°F . . . . 100°C
Green Tea . . . . . . . . . . . 160–180°F . . 71–82°C

© 2006 Component Design Northwest, Inc. Made in China CD9999150en - 11/06 EHC 614 885-2497
   
  
  
  
  
 
The information in this document has been reviewed and is
believed to be accurate. However, neither the manufacturer nor
its afliates assume any responsibility for inaccuracies, errors
or omissions that may be contained herein. In no event will
the manufacturer or its afliates be liable for direct, indirect,
special, incidental or consequential damages arisen by using
this product or resulting from any defect/omission in this
document, even if advised of the possibility of such damages.
The manufacturer and its afliates reserve the right to
make improvements or changes to this document and the
products and services described at any time, without notice
or obligation.
5-Year Limited Warranty: Any instrument that
proves to be defective in material or workmanship
within ve years of original purchase will be
repaired or replaced without charge upon receipt of
the unit prepaid at: CDN, PO Box 10947, Portland,
OR 97296-0947. This warranty does not cover
damage in shipment or failure caused by tampering,
obvious carelessness or abuse.
Insert stem
through
both holes
in sheath.
Temperature sensor
is between “dimple”
and tip of stem.
For best accuracy,
stem should be
inserted into food
to dimple or higher.