Cisco MX300 G2 User manual

Calling someone Using the list of contacts to call
Initiating a video conference (optional feature)
Keyboard layout
Tap Dial, as outlined.
When the number has
been keyed in, tap the
Call key to place the
call.
Key in the number, as
outlined.
When an entry has been located and
selected the Call menu will appear.
Tap Call to place the call. There are
some options available. These are always
context sensitive, which means that
meaningless options are not shown. For
example Add to Favorites is not available
for entries already residing in the list of
Favorites.
If you are going to
look in a specic
list only, tap the
corresponding
tab rst.
To search for someone, tap here to invoke the virtual keyboard
and then key in the name or number. Matches will appear as you
type. All three lists will be examined for possible matches.
To locate an entry, you may also scroll
through a list as you would do on a
smartphone. Tap to select an entry.
Any matches will
appear here. Tap to
select an entry. The
selected entry will
appear on a blue
background.
Method A (Multisite):
Method B (MultiWay/CUCM):
In a call
tap Add.
In a call
tap Add.
Search or dial in the usual
way.
Place a new call in the
usual way.
Tap Add to turn
the current call into a
conference.
Tap Merge to
turn the current
call into a conference.
Tap END to terminate the
conference.
Repeat the procedure to
add more participants.
Tap END to terminate the
conference.
Repeat the procedure to
add more participants.
Tap as outlined to go betwen dialpad and
alphanumerical keyboard.
Quick Reference Guide
Cisco TelePresence MX300 G2
TC7.1
D1507702 Quick Reference Guide MX200 G2/MX300 G2/SX80 TC7.1English, April 2014

A tour of the Touch padSharing content
Make sure your presentation source is switched on and connected to
the video system before you tap Presentation.
Make sure your source is
connected and on. Tap
Presentation, as outlined.
When the presentation is
over, tap Stop Presenting,
as outlined.
Scroll horizontally (a), if
needed, to locate the
required source, as outlined.
Then tap Present (b).
You should now see the
presentation on the screen.
Quick Reference Guide
Cisco TelePresence MX300 G2
TC7.1
Tap the touch screen
to wake up the system,
if needed.
Tap a button
to activate its
function.
Scroll in lists
as on a smart
phone.
Tap Dial to
invoke the
dial pad.
Tap Contacts to
invoke the list of
contacts including
Favorites,
Directory and
History.
Tap Meetings
to invoke a list
of upcoming
scheduled
meetings.
Tap
Messages
to invoke the
voice mail
system, if
applicable.
Tap
Presentation
to start sharing
content and
to conduct
presentations.
Press and hold
the left side of the
Volume button
to decrease the
loudspeaker volume
and the right side to
increase the volume.
Press the
Microphone
button to
mute /unmute
microphone.
Time of day is
indicated in the
upper right corner.
Tap the Camera
icon to activate
self-view and
camera settings.
Tap the ?to
contact or
access the Help
desk, if available.
Tap the upper left corner to
activate /deactivate the Do not
disturb feature, to activate /
deactivate the Standby feature, and
to access the Settings.
D1507702 Quick Reference Guide MX200 G2/MX300 G2/SX80 TC7.1English, April 2014