Climax Vesta Series Assembly instructions

Nov 8, 2019

Table of Contents
1. INTRODUCTION .................................................................................................................... 1
1.1. MOBILE PRO KIT...................................................................................................................1
1.2. WHAT’S IN THE BOX..............................................................................................................1
2. SYSTEM OVERVIEW ............................................................................................................ 3
2.1. IDENTIFYING THE PARTS .......................................................................................................3
2.2. POWER SUPPLY ....................................................................................................................5
3. GETTING STARTED –SETTING UP MOBILE LITE..........................................................6
3.1. SIM CARD INSERTION...........................................................................................................6
3.2. AMPLIFIER BASE INSTALLATION...........................................................................................6
3.3. POSITION THE MOBILE LITE ON THE AMPLIFIER BASE........................................................7
3.4. CHARGING MOBILE LITE.......................................................................................................8
3.5. HARDWARE INSTALLATION....................................................................................................8
3.6. SOFTWARE INSTALLATION ..................................................................................................10
3.6.1. Installing USB Driver................................................................................................. 10
3.6.2. Installing PC Programming Tool............................................................................ 10
4. PROGRAMMING MOBILE LITE......................................................................................... 14
4.1. PC PROGRAMMING TOOL (INSTALLERS ONLY).................................................................14
4.1.1. Profile............................................................................................................................ 16
4.1.2. SMS Program.............................................................................................................. 18
4.1.3. APN................................................................................................................................ 18
4.1.4. Report Setting............................................................................................................. 19
4.1.5. Geo-fence..................................................................................................................... 25
4.1.6. Setting........................................................................................................................... 29
4.1.7. Miscellaneous.............................................................................................................34
4.1.8. Firmware ...................................................................................................................... 34
4.2. SMS REMOTE PROGRAMMING........................................................................................... 36
5. LOCAL RF DEVICE MANAGEMENT ................................................................................ 37
6. OPERATION......................................................................................................................... 38
6.1. ANSWERING INCOMING CALLS ...........................................................................................38
6.2. CURRENT OPERATION CONDITION .....................................................................................38
6.3. GPS /CELL LOCATE FUNCTION......................................................................................... 39
6.4. GEOFENCING ......................................................................................................................39
6.5. ALARM ACTIVATION ............................................................................................................40
6.5.1. Alarm Report Procedure.......................................................................................... 41
6.5.2. Callback Mode ............................................................................................................ 44

6.5.3. Speech Reporting Method....................................................................................... 45
6.5.4. Report Sequence .......................................................................................................46
6.5.5. Special Reporting Case: IP + Speech Report.....................................................48
6.6. SLEEP MODE.......................................................................................................................48
6.7. REBOOTING AND FACTORY RESETTING MOBILE LITE .......................................................48
6.8. VOICE PROMPTS .................................................................................................................50
7. AMPLIFIER BASE ............................................................................................................... 51
8. APPENDIX............................................................................................................................ 52
8.1. SMS REMOTE PROGRAMMING COMMANDS TABLE...........................................................52
8.2. CONTACT ID COMMUNICATIONS PROTOCOL AND FORMAT ...............................................55
8.3. SIADIGITAL COMMUNICATION STANDARD.........................................................................58
8.4. CSV IP................................................................................................................................59

1
1. Introduction
1.1. Mobile Pro Kit
The Mobile Pro kit includes two main components
I. Mobile Lite: Mobile Lite is a light, portable and richly featured cellular
medical alarm with GPS positioning, cell locator, GeoFencing and Cellular
network that protect you wherever you go. The device is a standalone
medical alarm capable of playing voice prompts to raise the users’
self-awareness and reporting events via Speech, SMS and IP protocols to
directly communicate with the monitoring centers.
II. Amplifier Base: The Amplifier Base provides improved functionalities to
Mobile Lite when Mobile Lite is inserted into the base, which makes
Mobile Lite more suitable for home operation.
1.2. What’s in the Box
Your Mobile Lite package includes the following items:
Items
Mobile Lite
Amplifier Base
USB Type C cable
CD-ROM containing:
- Mobile Lite Installation and Operation Guide
- USB Driver Installer
- PC Programming Tool
USB Cable
Mobile Lite has a USB Type C port for charging or programming.
For charging, place Mobile Lite on Amplifier Base (refer to 3.3. Position the
Mobile Lite on the Amplifier Base), then connect AC power to base to
charge Mobile Lite.
For programming via connecting Mobile Lite to computer, a special
programming USB cable is required. The USB end of programming cable is
larger than the regular cable.
Always use the Programming micro USB cable for connecting Mobile Lite to
computer. Never use a regular micro USB cable for computer connection.
If Programming cable is not provided, please contact your supplier.

2
Lanyard and Attachment
Using the Lanyard
Step 1. Attach the lanyard to the Mobile Lite unit by looping the lanyard strap
through the lanyard holes on the Mobile Lite unit, and then pulling the
strap through until it is tight.
Step 2. Lock the release buckle by inserting the male part into the female part
until you hear a click sound.
Step 3. Put the lanyard around the neck of the user.
Programming USB
Cable
Regular USB
Cable

3
2. System Overview
2.1. Identifying the Parts
Mobile Lite
Button/LED/Compon
ent
Behavior
Function/Indication
1. Microphone
2. Top LED (Green)
On
Charging
1 flash every 5 seconds
Normal Operation
Top LED (Red)
1 Flash every 3 seconds
Low Battery
When Mobile Lite is charging, the Red LED will not indicate the battery
status.
3. Bottom LED
(Amber)
1 Flash every 3 seconds
Cellular Network fault
4. Active Button
Plug Mobile unit into base
To turn on the unit (exits sleep
mode)
Press and hold for 5 seconds
- To turn on the unit (exits sleep
mode) without using the base.
- To turn off the unit (enters
sleep mode)
Press once
Trigger emergency alarm
Press and hold for 5 seconds during
a Guard Time
Cancel alarm
Press once when Mobile Lite is
ringing
Pick up incoming call
Press and hold for 5 seconds during
a call
Terminate the call
Press and hold for 8 seconds in
normal mode
Enter RF device learning mode
Press twice in learning mode
Remove all learnt device
Press once in learning mode
Exit learning mode

4
Press and hold for 15 seconds when
idle
To enter reset mode for 10
minutes:
1. Press the Active Button
once to reboot Mobile Lite
2. Press the Active Button
twice within 1 second to
factory reset Mobile Lite
Please refer to 6.7. Rebooting
and Factory Resetting
Mobile Lite for more details
5. Speaker
6. Micro USB Port
7. SIM Card Cover
Fixing Screw
8. SIM Card Cover
9. Micro SIM Card
Slot
Amplifier Base
Button/LED/Component
Behavior
Function/Indication
1. Battery Switch
Slide the battery switch to ON
position.
The backup battery will be
charged when AC power is
connected and serve as a backup
power source when AC power is
missing.
2. DC Jack
Connect to an AC-DC 12V/1A
switching power adapter.
3. Speaker
Replace Mobile Lite speaker
when Mobile Lite is inserted.

5
4. Mobile Lite Slot
5. LED Indicator
ON
Reporting
Flash
Guardtime Delay or
Retrying report
6. Help Button
Press when Mobile Lite is
inserted
Activate alarm
7. Volume Adjustment
Button
Press +or –when Mobile Lite
is inserted
Increase or decrease volume
8. Power LED (Green)
ON
AC power connected
OFF
AC power disconnected
9. Mobile Lite LED
(Blue)
ON
Mobile Lite is inserted
OFF
Mobile Lite removed
10. Microphone
Replace Mobile Lite
microphone when Mobile Lite
is inserted.
2.2. Power Supply
Mobile Lite is powered by rechargeable battery.
The typical charging time is 4 hours.
To Charge Mobile Lite, please refer to 3.4. Charging Mobile Lite.
When Mobile Lite is low on battery, the Top LED will flash Red every 3
seconds and Mobile Lite will make Low Battery report.
If battery is not changed after making Low Battery report, Mobile Lite will
make the second Low Battery report when battery voltage drops too low
and turn off GPS function.
Mobile Lite makes a battery restored report to the CMS when its battery is
fully recharged.

6
3. Getting Started –Setting up Mobile Lite
3.1. SIM Card Insertion
Step 1. Loosen the Cover Fixing Screws using a Philips screwdriver and
remove the SIM Card Protective Cover.
Step 2. Insert SIM Card into Mobile Lite, the chip side of the SIM card should
face the front side of Mobile Lite as you insert the card.
<
<W WA AR RN NI IN NG G> >
Only a Micro SIM card can fit it the SIM card slot. If you don't have the
right SIM size, please contact your service provider for a replacement SIM
card, or use a SIM card adapter to convert your SIM card to correct size.
Please make sure that the micro SIM card PIN code is deactivated and all
SMS messages removed before insertion.
Step 3. Replace the Protective Cover and tighten the Protective Cover Fixing
Screws using a Philips screwdriver.
3.2. Amplifier Base Installation
Step 1. Clean the location where you wish to place the Amplifier Base with
degreaser.
Step 2. Remove the paper backing of the double-sided adhesive pad on the
back of the Amplifier Base.
Step 3. Place the Amplifier Base at the desired locaiton, and press firmly for
30 seconds to ensure good contact.

7
3.3. Position the Mobile Lite on the Amplifier Base
Step 1. Place the Mobile Lite against the slot of the Amplifier Base, making
sure the back of Mobile Lite is touching the surface of the slot, so that
they are in the same orientation.
→
Step 2. Slide in the Mobile Lite to connect it to the Type C USB of the
Amplifier Base.
<
<W WA AR RN NI IN NG G> >
When the Mobile Lite is placed properly against the slot, it can be easily
slid in over the surface of the slot.
If the Mobile Lite is incorrectly positioned, you are not able to have the
Type C USB of the Amplifier Base propertly inserted into the Type C USB
port of the Mobile Lite. Please do not forcifuly press down the Mobile
Lite, otherwise the Type C USB port and the Type C USB will be
damaged.

8
3.4. Charging Mobile Lite
Step 1. Connect Amplifier Base to AC power to power up the base
Step 2. Place Mobile Lite onto the slot on Amplifier Base to charge Mobile
Lite (Refer to 3.3. Position the Mobile Lite on the Amplifier Base).
The Blue LED on the base will light up if Mobile Lite is properly
connected.
3.5. Hardware Installation
To use PC Programming Tool for programming Mobile Lite, follow the
hardware installation steps below:
Step 1. Connect Programming Micro-USB Cable to the USB Type C port at
bottom of Mobile Lite.
Step 3. Insert the programming/charging end of the Programming Micro-USB
Cable into a computer USB port as shown in the picture below:
<
<W WA AR RN NI IN NG G> >
If programming cable is not provided, please contact your supplier. DO

9
NOT attempt to connect Mobile Lite to computer with a regular Micro-USB
cable.
Programming
Micro-USB Cable
Regular Micro-USB
Cable

10
3.6. Software Installation
3.6.1. Installing USB Driver
Mobile Lite can be programmed via USB port connection of a computer using
the PC Programming Tool software (using the Programming Cable).
If the computer cannot recognize the USB connection, please try installing the
USB driver as instructed below.
Step 1. Make sure Mobile Lite and the computer is connected properly
(please refer to 3.3. Hardware Installation)
Step 2. Insert the supplied CD-ROM into your CD-ROM drive and find the
“USB Driver” folder. Double Click the “CDM v2.12.00 WHQL Certified”
file and follow the on-screen instruction to complete installing the
driver.
3.6.2. Installing PC Programming Tool
After installing the USB driver, follow the steps below to install the PC
Programming Tool:
Step 1. Insert the supplied CD-ROM into your CD-ROM drive.
Step 2. Find the “MobileLite_Vx.x_Setup.exe” file.

11
Step 3. Double click the file to initiate PC Programming Tool installation:
Step 4. Press “Next” if you wish to continue with the installation:

12
Step 5. Click on “Change” if you wish to select a different destination folder.
Click on “Next” to proceed to the next step.
Step 6. This will create a shortcut folder for the PC Programming Tool.
Select a different shortcut folder by clicking on the icon.
Alternatively, click on the field to edit a new shortcut folder name.
Click on “Next” to proceed to the next step.
Step 7. Confirm the details on the installation window.
Click on “Back” to go back and reconfigure the installation details.
Click on “Next” to proceed with the installation.

13
Step 8. Below is displayed when the installation is complete.
Click on “Finish” to complete the setup. A new icon will be displayed
on your desktop.
Step 9. The installation is now complete. Double-click on the “MobileLite_x.x”
icon to start the PC Programming Tool.

14
4. Programming Mobile Lite
Mobile Lite can be programmed by sending SMS commands to the device or
using a PC Programming Tool.
4.1. PC Programming Tool (Installers Only)
For system setting programming with PC Programming Tool software via USB
port, follow instruction below.
Step 1. Find and open the “PC Programming Tool” folder in the supplied
CD-ROM. Click “Mobile LiteX Vx.x.exe” to execute the programming
tool.
The following configuration screen will be opened.

15
Step 2. Select the following settings in the top section of the configuration
screen and click “Open.”
Port: Select the COM port generated for Mobile Lite after
installing the USB Driver (the USB port connected to Mobile
Lite).
Baud rate: 115200
Data: 8
Parity: None
Stop: 1
FlowCtrl: None
Step 3. Read Configuration
To start configuring Mobile Lite settings, click on “Open”. A Read configuration
success message will pop up, click “OK” to proceed:
The current Mobile Lite setting will be displayed. Click on different tabs to see
and edit Mobile Lite functions.

16
4.1.1. Profile
The Profile function allows you to create and edit different setting profiles
which can be easily accessed in the future for quick programming.
Current Setting
After reading the configuration of Mobile Lite, the Profile scroll down bar will
now display “Current Setting” indicating PC Programming Tool is now
displaying the current Mobile Lite configurations. Selecting different tabs will
show the current values of each setting.
If you select a different profile from the drop down menu, the “Current Setting”
profile will disappear to indicate the PC Programming Tool is no longer
displaying Mobile Lite’s current configuration. To access Current Setting again,
click on “Read”.
Default
When “Default” is selected, the PC Programming Tool will display default
configurations of Mobile Lite, you can use this profile to return Mobile Lite to its
default setting.
New Profile
To create a new profile, click on “New Profile”. A pop-up window will prompt
you to enter a profile name:
After entering a profile name, the profile scroll down bar will show the new
profile name:
After editing the settings, click “Save Profile”to save the profile settings. A
pop-up window will indicate the profile has saved. You can use this profile in
the future to apply the same setting to other Mobile Lite.

17
Apply profile
If you wish to apply all the configuration of a profile into Mobile Lite, go to each
individual page and click on all the “Write”buttons to make sure all settings are
programmed into Mobile Lite.
Profile Manager
Click on “Profile Manager” to manage the profiles:
Delete Profile
Select a profile and click on “Delete Profile”. A pop-up window will ask you to
confirm the selection:
Select “Yes” to delete the profile, or “No” to return to the previous page.