Connects2 CAM-MB5 User manual

Image Sensor: 1/3” CCD
Resolution: NTSC 976 x 494, PAL 976 x 596
TV Lines: 700
Minimum Illumination: 0 Lux (LED’s on)
Infra-Red LED’s: Yes
Night Vison Distance: 35ft
Waterproof Rating: IP68
Viewing Angle: 170 Degrees
Operating Voltage: 12V DC (Negative Ground)
Current Consumption: 90-138mA @ 13.8V
Operating Temperature: -20 Degrees C to +70 Degrees C
Image: Mirror
Audio: Yes
User Manual
Prior to Installation
Read the manual prior to installation. Technical knowledge is necessary for installation.
Please ensure you use the correct tools to avoid damage to the vehicle or product.
Connects2 can not be held responsible for the installation of this product.
Technical Support
Connects2 want to provide a fast and suitable resolution should you encounter any tech-
nical issues. With this in mind, when contacting Connects2, try to provide as much Infor-
mation as possible. This will speed up the process and help us to help you.
Please use our dedicated online technical support centre: support.connects2.com
Mercedes Benz Reverse Camera
Sprinter
PRODUCT FEATURES:
DISCLAIMER:
CAM-MB5

www.connects2.com
2
Connects2Vision
CONTENTS
- Brake light camera with 70cm cable to Male 4pin camera connector.
- Adhesive pad
- Camera connection cable with Female 4pin camera connector to Female RCA
video connector, Female RCA audio connector and Female DC connector
- 1.5m DC power cable
- 10m 4pin to 4pin extension cable
- Male to Male RCA splice
- Instructions
INSTALLATION
1. Remove the third brake light from the vehicle and remove the internal light as-
sembly.
2. Insert the light assembly into the CAM-VW5 housing and ret to the vehicle taking
care not to trap any cables.
3. Connect the Black wire to a suitable ground and connect the Red wire to the
reversing light circuit or an interface which provides a reverse signal.
4. Connect the camera to the 4pin extension cable, connect the extension cable
to the camera connection cable and connect the camera connection cable
to the display screen via the Yellow RCA connector and ensure that the image is
displayed correctly.
5. If audio from the camera is required, connect the White RCA connector to the
audio input on the screen.
Subscribe to our YouTube Channel for installation
guides and tips... www.youtube.com/connects2