Corriveau Australia ACP User manual

1
Australia ACP gazebo 10’ x 10’
E101003- (2019)

2
IMPORTANT:
Please read and follow all safety statements, warnings, assembly instructions, use & care
directions before attempting to assemble. Each of the recommendations must be followed to ensure the utmost
solidity.
Security Rules
Warning:
Keep ame and heat sources away from the gazebo fabric. e fabric may burn if it is exposed to prolonged
contact with a source of heat. e application of any foreign substance to the gazebo fabric may render the
ame-resistant properties ineective.
Regulation:
It is the responsibility of the consumer being in accordance with city regulation, construction code, zoning or
any limitations and obtaining permit prior assembling gazebo.
Recommendation :
• When assembling and using this product, basic safety precautions should always be followed to reduce
the risk of personal injury and damage to parts.
• Do not use the gazebo during extreme weather conditions.
• Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list. If any part is missing or damaged, do not attempt to assemble the product.
• Some parts may contain sharp edges. Use of protective gloves is always recommended.
• When installing and assembling your gazebo, it is recommended that 2 or more adults are involved.
• Considering at least ve hours to complete installation, even well anchored, a gazebo unit that is not ni
shed assembly can get or create damages to nearby environment.
• Verify that all nuts and bolts are tightly secured before and during use.
• Use proper tools and equipment for a safe and compliant installation. Never climb, sit or stand on struc
ture while assembling.
• Even if this gazebo is built for all year round, the snow must be removed from the roof at all time.
• Mosquito net and curtains (optional) must be removed from the unit in freezing period.
• Anchoring bolts or other anchoring devices are not supplied.
• Keep away from any electric installation or transportation device.
• Always recommended to keep assembly manual for further reference.

3
Care :
Avoid using a pressure washer. e use of a mild soap with warm water is the best solution for the frame only.
A clear water rinse is necessary then. Never use soap on fabric, this will reduce their durability, consequently
their lifespan and general look. e use of a so brush and warm water are an excellent solution for cleaning the
fabric.
Warranty
Covered
We warrant the frame and fabric to be free of manufacturing defects to the original purchaser for one year.
Not covered
is warranty does not cover commercial use, improper care, neglected storage, vandalism, chemical, acts of
nature, re, oxidation, stains, freeze damage, improper packaging for return and unreasonable or abusive use.
Normal discoloration and build-up snow are not covered either.
Customer service:
Consumer
For each part request, please contact your retailer with a description of the problem, pictures and consumer
invoice copy, to ensure the proper information to be proceed.
Seller:
In addition to all the information already provided by the consumer, any parts requested must mention the per-
son responsible for the client’s le, the retailer name, address, branch if applicable, e-mail address, fax and phone
number.

4
NO. Description Drawing QTY
APost 4
B Crossbar 4
C Crossbar 4
D Braces 8
E Corner Roof Tube 4
FRoof Tube 4
GRoof Tube 4
HRoof Tube 4
IRoof Tube 4
JSmall Support
Crossbar 16
K Roof Edge 20

5
NO. Description Drawing QTY
L Base Flange 4
MConnector 4
N Corner Moulding 4
O Central Connector 1
PRoof Cap 1
QHook 1
R Bracket 8
S Bracket 8
T Roof Panel 4
U Roof Panel 4
V Roof Panel 4

6
NO. Description Drawing QTY
W Roof Panel 4
X Roof Panel 4
Y Curtain Hook 80
ZHook Stopper 8
AA Mosquito Net 4
BB Curtain 4
CC Roof Corner
Bracket 4
DD Side Roof Bracket 16
EE M6X15 Bolt 112
FF M6X30 Bolt + Nut 20
GG Shoulder Socket
Screw 32

7
NO. Description Drawing QTY
HH Self Tapping Screw 16
II Stake 8
JJ Wrench 1
KK Wrench 1
LL Allen Key 1
MM Screwdriver 1

8
Step 1:
Install a base ange (L) to the bottom of a post (A) using bolts (EE). Repeat the step for all other posts.
Step 2:
Using bolts (EE) and connectors (M), put together all crossbars (B) and (C).

9
Step 3:
As shown, using bolts (GG), x the crossbars assembly (B)/(C) to posts (A).
Step 4:
Using (EE) bolts, x (D) braces to posts (A) and crossbars assembly (B)/(C).

10
Step 5:
As shown, using self tapping screws (HH) x corner mouldings (N) at appropriate locations.
Step 6:
Fix the corner roof tubes (E) to the central connector (O). Just push tubes until spring pins makes a click
sound.

11
Step 7:
Lay down the assembly of corner roof tubes (E)/(O) on crossbars four corners
previously assembled and x at each corner by the use of bolts and nuts (FF).
en x the roof cap (P) on top of assembly using hook (Q).
Step 8:
As shown, x roof tubes (F), (G), (H) and (I) to corner roof tubes (E) using (R) brackets and bolts (EE).
Pay attention to locate brackets (R) pins towards up. Fix other ends to crossbars assembly (B)/(C) using
bolts and nuts (FF).

12
Step 10:
Insert the small support crossbars (J) on pins of (S) and (R) brackets.
Step 9:
As shown, x the (S) brackets to roof tubes (F) and (G) using (EE) bolts.

13
**Fixing the roof panels :
To avoid the roof panels
to slide down, follow
these 3 steps combined
for each panel.**

14
Step 12:
Insert the roof edges (K) at ends of roof tubes (I), (G), (F) and (H).
Step 11:
Slide roof panels (T), (U), (V), (W) and (X) into the grooves of roof tubes.

15
Step 14:
Hang up the curtain hooks (Y) into the loops of the curtain (BB) and slide the hooks into the external rail
of the (B)/(C) crossbars.
Step 13:
As shown, using bolts (EE) x the roof corner brackets (CC) and the side roof brackets (DD) to ends of
roof tubes (I), (G), (F) and (H). In order not to damage inserts, do not over tighten the bolts.

16
Step 16:
en insert the hook stoppers (BB) at ends of rails of (B)/(C) crossbars. Use the stakes (II) for ground
xing. Take note the anchoring devices to use may vary with ground status. Additional anchoring devices
are not provided.
Step 15:
Hang up the curtains hooks (Y) to the mosquito net loops (AA) and insert these hooks into the inside rail
of the (B)/(C) crossbars.