Corriveau Austria ACP User manual

1
Austria ACP gazebo 10’ x 12’
E101206- (2019)

2
IMPORTANT:
Please read and follow all safety statements, warnings, assembly instructions, use & care
directions before attempting to assemble. Each of the recommendations must be followed to ensure the utmost
solidity.
Security Rules
Warning:
Keep ame and heat sources away from the gazebo fabric. e fabric may burn if it is exposed to prolonged
contact with a source of heat. e application of any foreign substance to the gazebo fabric may render the
ame-resistant properties ineective.
Regulation:
It is the responsibility of the consumer being in accordance with city regulation, construction code, zoning or
any limitations and obtaining permit prior assembling gazebo.
Recommendation :
• When assembling and using this product, basic safety precautions should always be followed to reduce
the risk of personal injury and damage to parts.
• Do not use the gazebo during extreme weather conditions.
• Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list. If any part is missing or damaged, do not attempt to assemble the product.
• Some parts may contain sharp edges. Use of protective gloves is always recommended.
• When installing and assembling your gazebo, it is recommended that 2 or more adults are involved.
• Considering at least ve hours to complete installation, even well anchored, a gazebo unit that is not ni
shed assembly can get or create damages to nearby environment.
• Verify that all nuts and bolts are tightly secured before and during use.
• Use proper tools and equipment for a safe and compliant installation. Never climb, sit or stand on struc
ture while assembling.
• Even if this gazebo is built for all year round, the snow must be removed from the roof at all time.
• Mosquito net and curtains (optional) must be removed from the unit in freezing period.
• Anchoring bolts or other anchoring devices are not supplied.
• Keep away from any electric installation or transportation device.
• Always recommended to keep assembly manual for further reference.

3
Care :
Avoid using a pressure washer. e use of a mild soap with warm water is the best solution for the frame only.
A clear water rinse is necessary then. Never use soap on fabric, this will reduce their durability, consequently
their lifespan and general look. e use of a so brush and warm water are an excellent solution for cleaning the
fabric.
Warranty
Covered
We warrant the frame and fabric to be free of manufacturing defects to the original purchaser for one year.
Not covered
is warranty does not cover commercial use, improper care, neglected storage, vandalism, chemical, acts of
nature, re, oxidation, stains, freeze damage, improper packaging for return and unreasonable or abusive use.
Normal discoloration and build-up snow are not covered either.
Customer service:
Consumer
For each part request, please contact your retailer with a description of the problem, pictures and consumer
invoice copy, to ensure the proper information to be proceed.
Seller:
In addition to all the information already provided by the consumer, any parts requested must mention the per-
son responsible for the client’s le, the retailer name, address, branch if applicable, e-mail address, fax and phone
number.

4
NO. Description Drawing QTY
APost 4
B Crossbar 2
C Crossbar 2
D Crossbar 2
E Crossbar 2
FBrace 8
G Corner Roof Tube 4
HRoof Tube 2
IRoof Tube 4
JRoof Tube 4
KRoof Tube 4

5
NO. Description Drawing QTY
LRoof Tube 4
MRoof Tube 4
NRoof Tube 2
O Roof Edge 2
P Roof Edge 4
QSmall Support
Crossbar 6
R Roof Edge 22
SSmall Support
Crossbar 14
T Base Flange 4
UConnector 4
V Bracket 2

6
NO. Description Drawing QTY
W Corner Moulding 4
X Central Connector 4
YCentral Support 2
ZRoof Cap 1
AA Hook 2
BB Roof Spacer
Bracket 2
CC Roof Spacer
Bracket 6
DD Bracket 8
EE Bracket 12
FF Roof Panel 2
GG Roof Panel 2

7
NO. Description Drawing QTY
HH Roof Panel 2
II Roof Panel 4
JJ Roof Panel 4
KK Roof Panel 6
LL Roof Panel 4
MM Roof Panel 4
NN Hook 88
OO Hook Stopper 8
PP Small Mosquito
Net 1
QQ Mosquito Net 1
RR Curtain 1

8
NO. Description Drawing QTY
SS Corner Roof
Bracket 8
TT Side Roof Bracket 20
UU M6X15 Bolt 126
VV M6X30 Bolt + Nut 34
WW Shoulder Socket
Screw 32
XX Self Tapping Screw 16
YY Stake 8
ZZ Wrench 1
AAA Wrench 1
BBB Allen Key 1
CCC Screwdriver 1

9
Step 1:
Install a base ange (O) to the bottom of a post (A) using bolts (LL). Repeat the step for all other posts.
Step 2:
Join crossbars (B) and (C) by using connector (U) and bolts (UU).

10
Step 3:
Join crossbars (D) and (E) by the use of connector (U) and bolts (UU). Take care to x at middle point a
bracket (V) using a bolt (UU).
Step 4:
As shown, x the crossbars assembly (B)/(C) and (D)/(E) to posts (A) by using bolts (WW).

11
Step 5:
As shown, x the braces (F) to posts (A) and crossbars assembly (B)/(C) and (D)/(E) by using bolts (UU).
Step 6:
As shown, x at appropriate location corner moulding (W) by using self tapping screws (XX).

12
Step 7:
Join two central connector (X) to a central support (Y). Just push tubes until spring pins makes a ‘’click’’
sound.
Step 8:
Repeat same procedure to x corner roof tubes (G) and roof tubes (H) as shown.

13
Step 9:
Lay down the last assembly on the gazebo main frame and x tubes ends by using bolts and nuts (VV).
Step 10:
Fix the roof tube (L), (J), (I) and (K) to corner roof tubes (G) by using brackets (DD) and bolts (UU) as
shown. Fix other ends of tubes to the main frame by using bolts and nuts (VV).

14
Step 11:
Join two central connector (X) to a central support (Y). Just push tubes until spring pins makes a ‘’click’’
sound.
Step 12:
Repeat same procedure to x roof tubes (M) and (N) as shown.

15
Step 13:
Fix the roof spacer (BB) under this last assembly by covering and screwing the roof cap (Z) on. Lay down
this assembly over the rst central connector (X) tted with (G) corner roof tubes. Fix by using the hook
(AA) as shown.
Fix other ends of the roof tubes (M) and (N) to the roof corner tubes (G) and other tubes (H) by using
the roof spacer brackets (CC) and bolts and nuts (VV).
Step 14:
Using bolts (UU) x the brackets (EE) to roof tubes (H). Pay attention to locate brackets pins toward up.

16
Step 15:
Insert small support crossbar (Q) on pins of bracket (DD).

17
Step 16:
Insert roof panels (FF), (GG) and (HH) into the groove of roof tubes (M) and (N).
**Fixing the roof panels :
To avoid the roof panels
to slide down, follow
these 3 steps combined
for each panel.**

18
Step 17:
As illustrated, insert roof edges (P) and (O) at the ends of roof panels of the small roof.
Step 18:
As illustrated x the roof corner brackets (SS) and side roof brackets (TT) by using (UU) bolts. In order
not to damage inserts, do not over tighten the bolts.

19
Step 19:
As illustrated, install brackets (EE) to roof tubes (H), (I) and (J) by using bolts (UU).
Step 20:
Insert small support crossbars (S) on pins of brackets (EE) and (DD) as shown.

20
**Fixing the roof panels :
To avoid the roof panels
to slide down, follow
these 3 steps combined
for each panel.**