Corriveau Austria ACP User manual

1
Austria ACP gazebo 8’ x 8’
E080806- (2019)

2
IMPORTANT:
Please read and follow all safety statements, warnings, assembly instructions, use & care
directions before attempting to assemble. Each of the recommendations must be followed to ensure the utmost
solidity.
Security Rules
Warning:
Keep ame and heat sources away from the gazebo fabric. e fabric may burn if it is exposed to prolonged
contact with a source of heat. e application of any foreign substance to the gazebo fabric may render the
ame-resistant properties ineective.
Regulation:
It is the responsibility of the consumer being in accordance with city regulation, construction code, zoning or
any limitations and obtaining permit prior assembling gazebo.
Recommendation :
• When assembling and using this product, basic safety precautions should always be followed to reduce
the risk of personal injury and damage to parts.
• Do not use the gazebo during extreme weather conditions.
• Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list. If any part is missing or damaged, do not attempt to assemble the product.
• Some parts may contain sharp edges. Use of protective gloves is always recommended.
• When installing and assembling your gazebo, it is recommended that 2 or more adults are involved.
• Considering at least ve hours to complete installation, even well anchored, a gazebo unit that is not ni
shed assembly can get or create damages to nearby environment.
• Verify that all nuts and bolts are tightly secured before and during use.
• Use proper tools and equipment for a safe and compliant installation. Never climb, sit or stand on struc
ture while assembling.
• Even if this gazebo is built for all year round, the snow must be removed from the roof at all time.
• Mosquito net and curtains (optional) must be removed from the unit in freezing period.
• Anchoring bolts or other anchoring devices are not supplied.
• Keep away from any electric installation or transportation device.
• Always recommended to keep assembly manual for further reference.

3
Care :
Avoid using a pressure washer. e use of a mild soap with warm water is the best solution for the frame only.
A clear water rinse is necessary then. Never use soap on fabric, this will reduce their durability, consequently
their lifespan and general look. e use of a so brush and warm water are an excellent solution for cleaning the
fabric.
Warranty
Covered
We warrant the frame and fabric to be free of manufacturing defects to the original purchaser for one year.
Not covered
is warranty does not cover commercial use, improper care, neglected storage, vandalism, chemical, acts of
nature, re, oxidation, stains, freeze damage, improper packaging for return and unreasonable or abusive use.
Normal discoloration and build-up snow are not covered either.
Customer service:
Consumer
For each part request, please contact your retailer with a description of the problem, pictures and consumer
invoice copy, to ensure the proper information to be proceed.
Seller:
In addition to all the information already provided by the consumer, any parts requested must mention the per-
son responsible for the client’s le, the retailer name, address, branch if applicable, e-mail address, fax and phone
number.

4
NO. Description Drawing QTY
APost 4
B Crossbar 4
CBrace 8
D Corner Roof Tube 4
ERoof Tube 4
FRoof Tube 4
GRoof Tube 4
HRoof Tube 4
I Roof Edge 4
JSmall Support
Crossbar 8
K Roof Edge 16

5
NO. Description Drawing QTY
L Base Flange 4
M Corner Moulding 4
N Central Connector 1
O Central Connector 1
PRoof Cap 1
QHook 1
RRoof Spacer 1
SRoof Spacer
Bracket 4
T Bracket 4
U Bracket 4
V Roof Panel 4

6
NO. Description Drawing QTY
W Roof Panel 4
X Roof Panel 4
Y Roof Panel 4
Z Roof Panel 4
AA Curtain Hook 64
BB Hook Stopper 8
CC Small Mosquito
Net 1
DD Mosquito Net 4
EE Curtain 4
FF Roof Corner
Bracket 8
GG Side Roof Bracket 12

7
NO. Description Drawing QTY
HH M6X15 Bolt 64
II M6X30 Bolt + Nut 24
JJ Shoulder Socket
Screw 32
KK Self Tapping Screw 16
LL Stake 8
MM Wrench 1
NN Wrench 1
OO Allen Key 1
PP Screwdriver 1

8
Step 1:
Install a base ange (L) to the bottom of a post (A) by using bolts (HH). Repeat for all remaining posts.
Step 2:
Install the track (B) between two posts (A) using the bolts (JJ) on the outside of the tracks.
Repeat for all remaining tracks (B).

9
Step 3:
Fix braces (C) into post (A) & track (B) of the structure using the bolts (HH).
Step 4:
Using (KK) self tapping screws, x the corner moulding (M) to appropriate locations.

10
Step 5:
Slide the corner roof tubes (D) and the roof tubes (E) into the central connector (N). Just push tubes until
spring pins makes a ‘’click’’ sound.
Step 6:
Lay down the roof tube assembly on former assembled frame and x together by the use of bolts and nuts
(II).

11
Step 7:
Fix the roof tubes (F) and (G) to corner roof tubes (D) by using brackets (T) and bolts (HH). Pay attention
to locate pins of brackets (T) toward up. Fix other end of roof tubes by using bolts and nuts (II) as illus-
trated.
Step 8:
Slide the roof tubes (H) of the small roof tube into the central connector (O). Just push tubes until spring
pin makes a ‘’click’’ sound.

12
Step 9:
Fix the roof tubes (F) and (G) to corner roof tubes (D) by using brackets (T) and bolts (HH). Pay attention
to locate pins of brackets (T) toward up. Fix other end of roof tubes by using bolts and nuts (II) as illus-
trated.

13
Step 10:
Insert roof panels (V) into the grooves of roof tubes (H).
**Fixing the roof panels :
To avoid the roof panels
to slide down, follow
these 3 steps combined
for each panel.**

14
Step 11:
Insert roof edges (I) to ends of roof panels (V).
Step 12:
Fix the roof corner brackets (FF) by using (HH) bolts as illustrated. In order not to damage inserts, do not
over tighten the bolts.

15
Step 13:
Fix the bracket (U) to roof tubes (E) by using bolts (HH). Pay attention to locate pins toward up.
Step 14:
As shown, insert small support crossbar (J) on pins of brackets (U) and (T). Ensure velcro of small support
crossbar (J) face toward ground.

16
**Fixing the roof panels :
To avoid the roof panels
to slide down, follow
these 3 steps combined
for each panel.**

17
Step 15:
Slide in roof panels (W), (X), (Y) and (Z) into the grooves of roof tubes.
Step 16:
Insert roof edges (K) to the ends of roof panels.

18
Step 17:
As shown, x the roof corner brackets (FF) and roof side brackets (GG) to ends of roof tubes. In order not
to damage inserts, do not over tighten the bolts.
Step 18:
Fix the mosquito net (CC) on small support crossbar (J).

19
Step 19:
Install curtain hooks (AA) into the loops of curtains (EE). en insert hooks into the external groove of
crossbar (B).
Step 20:
Hang up curtain hooks (AA) into the loops of mosquito net (DD). en insert the hooks into the internal
groove of the crossbars (B).

20
Step 21:
Insert hook stoppers (BB) to ends of the grooves of crossbars (B).
Step 22:
Use the stakes (LL) for ground xing. Take note the anchoring device to use may vary with ground status.
Additional anchoring devices are not provided.