Corriveau Austria ACP User manual

1
Austria ACP gazebo 10’ x 10’
E101006- (2019)

2
IMPORTANT:
Please read and follow all safety statements, warnings, assembly instructions, use & care
directions before attempting to assemble. Each of the recommendations must be followed to ensure the utmost
solidity.
Security Rules
Warning:
Keep ame and heat sources away from the gazebo fabric. e fabric may burn if it is exposed to prolonged
contact with a source of heat. e application of any foreign substance to the gazebo fabric may render the
ame-resistant properties ineective.
Regulation:
It is the responsibility of the consumer being in accordance with city regulation, construction code, zoning or
any limitations and obtaining permit prior assembling gazebo.
Recommendation :
• When assembling and using this product, basic safety precautions should always be followed to reduce
the risk of personal injury and damage to parts.
• Do not use the gazebo during extreme weather conditions.
• Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list. If any part is missing or damaged, do not attempt to assemble the product.
• Some parts may contain sharp edges. Use of protective gloves is always recommended.
• When installing and assembling your gazebo, it is recommended that 2 or more adults are involved.
• Considering at least ve hours to complete installation, even well anchored, a gazebo unit that is not ni
shed assembly can get or create damages to nearby environment.
• Verify that all nuts and bolts are tightly secured before and during use.
• Use proper tools and equipment for a safe and compliant installation. Never climb, sit or stand on struc
ture while assembling.
• Even if this gazebo is built for all year round, the snow must be removed from the roof at all time.
• Mosquito net and curtains (optional) must be removed from the unit in freezing period.
• Anchoring bolts or other anchoring devices are not supplied.
• Keep away from any electric installation or transportation device.
• Always recommended to keep assembly manual for further reference.

3
Care :
Avoid using a pressure washer. e use of a mild soap with warm water is the best solution for the frame only.
A clear water rinse is necessary then. Never use soap on fabric, this will reduce their durability, consequently
their lifespan and general look. e use of a so brush and warm water are an excellent solution for cleaning the
fabric.
Warranty
Covered
We warrant the frame and fabric to be free of manufacturing defects to the original purchaser for one year.
Not covered
is warranty does not cover commercial use, improper care, neglected storage, vandalism, chemical, acts of
nature, re, oxidation, stains, freeze damage, improper packaging for return and unreasonable or abusive use.
Normal discoloration and build-up snow are not covered either.
Customer service:
Consumer
For each part request, please contact your retailer with a description of the problem, pictures and consumer
invoice copy, to ensure the proper information to be proceed.
Seller:
In addition to all the information already provided by the consumer, any parts requested must mention the per-
son responsible for the client’s le, the retailer name, address, branch if applicable, e-mail address, fax and phone
number.

4
NO. Description Drawing QTY
APost 4
B Crossbar 4
C Crossbar 4
D Braces 8
E Corner Roof Tube 4
FRoof Tube 4
GRoof Tube 4
HRoof Tube 4
IRoof Tube 4
JRoof Tube 4
K Roof Edge 4

5
NO. Description Drawing QTY
LSmall Support
Crossbar 4
M Roof Edge 20
NSmall Support
Crossbar 12
O Base Flange 4
PConnector 4
Q Corner Moulding 4
R Central Connector 2
SRoof Cap 1
THook 1
URoof Spacer 1
VRoof Spacer
Bracket 4

6
NO. Description Drawing QTY
W Bracket 8
X Bracket 8
Y Roof Panel 4
Z Roof Panel 4
AA Roof Panel 4
BB Roof Panel 4
CC Roof Panel 4
DD Roof Panel 4
EE Curtain Hook 80
FF Hook Stopper 8
GG Small Mosquito
Net 1

7
NO. Description Drawing QTY
HH Mosquito Net 4
II Curtain 4
JJ Roof Corner
Bracket 8
KK Side Roof Bracket 16
LL M6X15 Bolt 116
MM M6X30 Bolt + Nut 28
NN Shoulder Socket
Screw 32
OO Self Tapping Screw 16
PP Stake 8
QQ Wrench 1
RR Wrench 1

8
NO. Description Drawing QTY
SS Allen Key 1
TT Screwdriver 1

9
Step 1:
Install a base ange (O) to the bottom of a post (A) using bolts (LL). Repeat the step for all other posts.
Step 2:
Using bolts (LL) and connectors (P) put together all crossbars (B) and (C).

10
Step 3:
As shown, using bolts (NN) x the crossbar assembly (B)/(C) to posts (A).
Step 4:
Using (LL) bolts, x (D) braces to posts (A) and crossbars assembly (B)/(C).

11
Step 5:
As shown, using self tapping screws (OO) x corner mouldings (Q) at appropriates locations.
Step 6:
Fix the corner roof tubes (E) to the central connector (R). Just push tubes until spring pins makes a click
sound.

12
Step 7:
Lay down the assembly of corner roof tubes (E)/(R) on crossbars four corners previously assembled and x
at each corner by the use of bolts and nuts (MM).
Step 8:
As shown, x roof tubes (F), (G), (H) and (I) to corner roof tubes (E) using (W) brackets and bolts (LL).
Pay attention to locate brackets (W) pins toward up. Fix other ends to crossbars assembly (B)/(C) using
bolts and nuts (MM).

13
Step 9:
As shown, x the roof tubes (J) to a central connector (R) by pushing tubes on until spring pins makes a
click sound.
Step 10:
Fix the roof spacer (U) under this last assembly by covering and screwing the roof cap (S) on. Lay down
this assembly over the rst central connector (R) tted with (E) corner roof tubes. Fix by using the hook
(T) as shown.
Fix other ends of the roof tubes (J) to the roof corner tubes (E) by using the roof spacer brackets (V) and
bolts and nuts (MM).

14
Step 11:
As shown, insert the small support crossbars (L) for the small roof onto the pins of the (W) brackets.

15
Step 12:
Insert the roof panels (Y) into the grooves of the roof tubes (J).
**Fixing the roof panels :
To avoid the roof panels
to slide down, follow
these 3 steps combined
for each panel.**

16
Step 13:
At ends of roof panels (Y), insert the roof edges (K).
Step 14:
Secure the roof panels (Y) in each corner by using the roof corner brackets (JJ) and bolts (LL). In order not
to damage inserts, do not over tighten the bolts.

17
Step 15:
As shown, x the (X) bracket to roof tubes (F) and (G) by using bolts (LL).
Step 16:
As shown, insert the small support crossbars (N) on the pins of the (W) brackets of the main roof.

18
**Fixing the roof panels :
To avoid the roof panels
to slide down, follow
these 3 steps combined
for each panel.**

19
Step 17:
Slide in roof panels (Z), (AA), (BB), (CC) and (DD) into the grooves of roof tubes.
Step 18:
Insert the roof edges (M) to the ends of the roof tubes (I), (G), (F) and (H).

20
Step 19:
As shown, using bolts (LL) x the roof corner brackets (JJ) and side roof brackets (KK) to ends of roof
tubes (I), (G), (F) and (H). In order not to damage
inserts, do not over tighten the bolts.
Step 20:
Fix the small mosquito net (GG) to the small roof.