Crux ACPGM-80N User manual

ACPGM-80N
Smart-Play Integration with Multi Camera Inputs
for Select 2013-2018 GM Vehicles with CUE & MyLink Systems
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: [phone] • fax: [phone] • www.cruxinterfacing.com
rev.1112201 of 9
- Smart-Play Integraon system allows connecon of Android and other phones to the GM infotainment system.
- Made for Android Auto and CarPlay.
- Adds front and rear aermarket camera inputs.
- Retains funconality of the OEM backup camera if present.
- Front camera automacally shows on the screen aer changing the gear from reverse to drive.
- Forced view funcon for front and aermarket rear camera.
PRODUCT FEATURES:
ACPGM-80N Module Power Harnesses Smartphone Interface Module
USB Extension Cable 4K HDMI Cable Microphone
LVDS Video Cable 3.5mm Aux Cable Smart-Play Module Power Harness
OSD Controller
PARTS INCLUDED:

Crux Interfacing Solutions • Chatsworth, CA 91311
phone: [phone] • fax: [phone] • www.cruxinterfacing.com
rev.1112202 of 9
WIRING DIAGRAM:
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
MAIN
ACPGM-80NC
Smart-Play / Android Auto Integration
for GM Vehicles with CUE & MyLink Systems
R
INTERFACINGSOLUTIONS
V IDEO
REAR CAMERA
FRONT CAMERA
Front Camera
12V Power & Ground
Rear Camera
12V Power & Ground
OSD
CONTROL
PAD
OSD Control Pad is used to
adjust the settings. Must be
unplugged and stored after.
LVDS
Adapter
Cable
To the LVDS Connector
behind top side of radio
From the LVDS Connector
behind top side of radio
To the 10-pin connector
behind top side of radio
From the 10-pin connector
behind top side of radio
Fuse
***See Special Note on page 3 regarding LVDS connections on RE models***
Red
Red
Black
Black
Multi/IO
HDMI
Smart-Play Module
R
INTERFACINGSOLUTIONS
HDMI
Power Port
+12V ACC (Red)
GND (Black)
Aux Cable
To factory
Aux Input
Microphone
Original Smartphone
Cable To Smartphone
ACPGM-80N
Smart-Play Integration with Multi Camera Inputs
for Select 2013-2018 GM Vehicles with CUE & MyLink Systems
DIP SWITCH SETTINGS:
DIP SETTING VEHICLE
1 to 8 ALL UP Malibu and Volt
1DOWN Corvee C7
2DOWN Escalade, CTS-V
3 UP No Funcon
4DOWN Cruze (with 8” screen)
5 DOWN Cadillac XT5
6DOWN Impala, Suburban, Tahoe, Yukon, Sierra, Acadia, Silverado, Yukon (with RSE)
7 DOWN Suburban (with RSE), Tahoe (with RSE)
1 & 5 DOWN Colorado
2 & 5 DOWN Escalade, CTS, CTS-V (with no OEM front camera)
RSE = Rear Seat Entertainment

Crux Interfacing Solutions • Chatsworth, CA 91311
phone: [phone] • fax: [phone] • www.cruxinterfacing.com
rev.1112203 of 9
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
ACPGM-80N
Smart-Play Integration with Multi Camera Inputs
for Select 2013-2018 GM Vehicles with CUE & MyLink Systems
Plug and play connecons behind the top side of the radio.
Suburban, Tahoe, Yukon models with Rear Seat
Entertainment Systems have 2 LVDS cables on
the back of the radio.
Suburban, Tahoe, Yukon with Rear Seat Entertainment (RSE) wiring connecons:
On RE models, the power harness is plugged in behind
the headunit but the LVDS cable is plugged in at the
HMI module (usually found behind the glove box).
Connecon is made on the blue LVDS connector on
the HMI module.
INSTALLATION INSTRUCTIONS:

Crux Interfacing Solutions • Chatsworth, CA 91311
phone: [phone] • fax: [phone] • www.cruxinterfacing.com
rev.1112204 of 9
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
ACPGM-80N
Smart-Play Integration with Multi Camera Inputs
for Select 2013-2018 GM Vehicles with CUE & MyLink Systems
SPECIAL NOTE:
On Impala and Suburban, Tahoe, Yukon models with Rear Seat Entertainment Systems, the LVDS cable
connecon on the ACPGM-80N LVDS adapter board is the opposite of the standard connecon. Please take
note of this when plugging in the LVDS connectors. See image below.
ACPGM-80N
LVDS OUT
OEM
Cable
Cadillac and Corvee C7 with 10 pin Connector at headunit
For Cadillac and Corvee C7 installaons, you must cut the ACPGM-80N 10 pin connectors and hardwire it to
the OEM connector wires.
ACPGM-80N POWER HARNESS
White LIN Bus
Blue/White MMI
Brown/White CAN
Red +12V Constant
Black Ground

Crux Interfacing Solutions • Chatsworth, CA 91311
phone: [phone] • fax: [phone] • www.cruxinterfacing.com
rev.1112205 of 9
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
ACPGM-80N
Smart-Play Integration with Multi Camera Inputs
for Select 2013-2018 GM Vehicles with CUE & MyLink Systems
GM vehicles without Rear Seat Entertainment (RSE) wiring connecons:
Plug and Play harness plugs
behind radio
ACPGM-80N LVDS video
cable plugs behind radio
LVDS Video Connecon
ACPGM-80N
LVDS OUT
OEM
Cable
Cadillac and Corvee C7 Connecon:
Cadillac and Corvee C7 10-Pin
Connector at headunit
LIN (Blue wire)
MMI (White wire)
Cut Green wire Pin #8
ACPGM-80N
Harness
Cut the Green wire on pin #8 on the 10 pin
factory connector and connect the LIN (blue
wire) and MMI (white wire) of the ACPGM-80N
harness following the diagram above.
10 Pin connector
PIN 1 = B+ connect to VCC Red wire
PIN 3 = CAN connect to CAN High (White/Brown) wire
PIN 8 = LIN (see connecon diagram above)
PIN 10 = Ground connect to Black wire
30 Pin ACPGM-80N main module pin out.
(Note: Wire colors can be dierent but pin
locaons will remain the same.

Crux Interfacing Solutions • Chatsworth, CA 91311
phone: [phone] • fax: [phone] • www.cruxinterfacing.com
rev.1112206 of 9
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
ACPGM-80N
Smart-Play Integration with Multi Camera Inputs
for Select 2013-2018 GM Vehicles with CUE & MyLink Systems
OSD Control Pad
The OSD Seng Screen automacally pops up when the OSD Control Pad is connected.
ON SCREEN DISPLAY (OSD) SETTINGS:
Use the OSD menu to make the necessary sengs. Remember to Run Save&Reboot aer the sengs
are made. Unplug the OSD Control Pad aer seng the cameras and keep it in a secure locaon in
case it is needed to change the sengs.
UP
DOWN
LEFT RIGHT
ENTER
Plug in 4K HDMI Cable Plug in 3.5mm Aux Cable
to factory Aux Input
Plug in original smartphone
cable to USB Ext. cable

Crux Interfacing Solutions • Chatsworth, CA 91311
phone: [phone] • fax: [phone] • www.cruxinterfacing.com
rev.1112207 of 9
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
ACPGM-80N
Smart-Play Integration with Multi Camera Inputs
for Select 2013-2018 GM Vehicles with CUE & MyLink Systems
REAR AND FRONT CAMERA SETTING
SMART-PLAY SETTING
Aer plugging in the OSD controller,
navigate down to LVDS Input and
set to ON. Push RIGHT buon to go
to the next menu.
Set Navi Brand to NV17 Navigate the OSD back
the main menu and go to
Save&Reboot then Run.

Crux Interfacing Solutions • Chatsworth, CA 91311
phone: [phone] • fax: [phone] • www.cruxinterfacing.com
rev.1112208 of 9
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
ACPGM-80N
Smart-Play Integration with Multi Camera Inputs
for Select 2013-2018 GM Vehicles with CUE & MyLink Systems
FRONT CAMERA SETTING
The front Camera will automacally show on the screen when the gear is put to Drive from Reverse. Set the delay
me on the OSD menu. Delay me can be set from 1 to 60 seconds aer a pung the car to drive from reverse.
Dynamic Parking Guide Lines
To turn ON the Dynamic Parking Guide Lines, go the Rear Input > Rear Set and turn ON Warning LANG.
Go back to the root menu and Run Save&Reboot. Remember to unplug the OSD Control Pad otherwise
the unit will not funcon properly. Set the parking brake on, start the car, put the gear in reverse, turn the
steering wheel all the way to the le and all the way to right then put it in the center. The ACPGM-80N
will calibrate automacally.

Crux Interfacing Solutions • Chatsworth, CA 91311
phone: [phone] • fax: [phone] • www.cruxinterfacing.com
rev.1112209 of 9
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
ACPGM-80N
Smart-Play Integration with Multi Camera Inputs
for Select 2013-2018 GM Vehicles with CUE & MyLink Systems
FORCE VIEWING THE FRONT CAMERA:
Press for 2 seconds = Force view front camera
Press once = Back to OEM screen
Press for 2 seconds = Force view rear camera
(only if aermarket camera is used)
Press once = Back to OEM screen
For MyLink IO5/IO6 radios:
VEHICLE APPLICATIONS:
Compable with 8” CUE or MyLink IO5/IO6 Systems.
8” Screen
Buick
2014-2018
Cadillac
2013-2018
2014-2018
2014-2018
2014-2018
2015-2018
2013-2018
2013-2018
2016-2018
LaCrosse
ATS
CTS Coupe
CTS
CTS-V
Escalade
SRX
XTS
XT5
Chevrolet
2014-2018
2017-2018
2015-2018
2015-2018
2014-2018
2015-2018
2014-2018
2015-2018
2015-2018
Avalanche
Colorado
Corvee
Cruze
Impala
Malibu
Silverado
Suburban
Tahoe
GMC
2017-2018
2015-2018
2014-2018
2014-2018
Acadia
Canyon
Sierra Pickup
Yukon
OPERATION:
To enter Smart-Play mode, press
the upper le corner of the screen
or double click the HOME buon.
Smart-Play home screen. Use
the factory touch screen for
Smart-Play controls.
Apps can be opened by touch
screen or by Siri control.