Crux MRVFD-79Q User manual

-Rear-view camera input.
-Provides 3 AV Inputs.
-With OE type Dynamic Parking Guidelines.
-Toggle AV inputs from OE radio bu�on, wireless remote control or wired push bu�on
switch provided.
-On-screen display and setup.
FORD
2017
Explorer
2016 - Up
F-150
2016 - Up
Focus
2016 - Up
Mustang
- Works on Ford vehicles with Sync 3 radios.
Explorer
F-150
Focus
Mustang
1 / 8
rev.012317

LVDC Controller LVDS Cable LCD IN Cable
RGB Cable IR Cable Remote Control
Power Harness
PUSH BUTTON
Selector
LCD OUT Cable
AV Cable REAR CAM
Power Harness
Uart Touch Cable
MRVFD-79Q Module
MRVFD-79Q
Multimedia Interface for
FORD Vehicles with Sync 3
R
MRVFD-79Q
LVDS Controller
Parts Included
Multimedia Integration Interface for
FORD Vehicles with Sync 3 Systems
MRVFD-79Q
Crux Interfacing Solutions
www.cruxinterfacing.com
tel. #: [phone]
fax #: [phone]
2 / 8 rev.012317

LVDS Cable
AV1
AV2
AV3
REAR C
Audio L
Audio R
AV/OUT Video
ACC
REAR
MMI
GND
CAN-H- HS
CAN-L-HS
F-CAM-DET
SAFE
CAN-H-LS
CAN-L-LS
REAR Camera Power (9V OUT)
GND
UART Touch
Cable
Find OEM cable connector(picture included on the left)
behind the monitor
Choose CAR MODEL: “SYNC3 TYPE2”
CAN1 : Gear data, PAS data
CAN2 : Monitor button data
- Connect OEM CAN1-H(Blue + White) wire
to supplied CAN -H-HS(Brown + Green) wire
- Connect OEM CAN1-L(White) wire
to supplied CAN-L-HS(Green)wire
- Connect OEM CAN2-H(Blue + Grey) wire
to supplied CAN -H-LS(Brown + Green) wire
- Connect OEM CAN2-L(Purple + Grey) wire
to supplied CAN-L-LS(Green ) wire
CAN1-H
CAN1-L
CAN2-H
CAN2-L
EXPLORER, MUSTANG, F150
Find OBD and connect the supplied power cable to OBD
Do not connect OEM cable connector behind the monitor
to the supplied power cable
(Monitor buttons are not supported)
Choose CAR MODEL: “SYNC3”
18
9
16
- Connect OBD pin 6(CAN -H) to
supplied CAN -H-HS(Brown + Green) wire
- Connect OBD pin14(CAN -L) to
supplied CAN-L-HS(Green) wire
RX
TX
GND
MRVFD-79Q
Multimedia Interface for
FORD Vehicles with Sync 3
R
MRVFD-79Q
LVDS Controller
Multimedia Integration Interface for
FORD Vehicles with Sync 3 Systems
MRVFD-79Q
Crux Interfacing Solutions
www.cruxinterfacing.com
tel. #: [phone]
fax #: [phone]
Wiring Diagram
3 / 8 rev.012317

Remove OEM LCD cable on the back of the radio
LVDS cable
Multimedia Integration Interface for
FORD Vehicles with Sync 3 Systems
MRVFD-79Q
Crux Interfacing Solutions
www.cruxinterfacing.com
tel. #: [phone]
fax #: [phone]
MRVFD-79Q
Multimedia Interface for
FORD Vehicles with Sync 3
R
MRVFD-79Q
LVDS Controller
4 / 8 rev.012317

ON: DOWN / OFF: UP
PIN Function DIP Switch
1 RGB mode OFF: RGB (NAVI) ON
ON: RGB (NAVI) OFF
2 AV1 mode OFF: AV1 ON
ON: AV1 OFF
3 AV2 mode OFF: AV2 ON
ON: AV2 OFF
4 AV3 mode
5, 6 No Function (Set to OFF)
7 Rear Camera OFF: OEM Rear camera
ON: Aftermarket rear camera
8
Key Function
POWER & PIP No use
MENU Activate FACTORY mode
OK Select / Change image display
▲UP
▼DOWN
LEFT
(press this button for 2 seconds to access the factory mode)
OFF: AV3 ON
ON: AV3 OFF
No Function (Set to OFF)
RIGHT
(press this button for 2 seconds to access the factory mode)
▼
▼
Multimedia Integration Interface for
FORD Vehicles with Sync 3 Systems
MRVFD-79Q
Crux Interfacing Solutions
www.cruxinterfacing.com
tel. #: [phone]
fax #: [phone]
DIP Switch Settings
Remote Control
5 / 8 rev.012317

IMAGE
PARK
UT IL1
UT IL2
INFO
H- POSIT ION
V- POSIT ION
H- SIZE(NAVI)
Menu of FACT ORY
MENU t o Retur n SEL to Select/Save
IMAGE
PARK
UT IL1
UT IL2
INFO
PAS T YPE
PAS SET UP
REAR T YPE
SAFE ENABLE
Menu of FACT ORY
MENU to Return SEL to Select/Save
Adjusting Screen position and size
H-POSITION : Move the image horizontally
V-POSITION : Move the image vertically
H-SIZE(NAVI) : Adjust the size of navigation
image horizontally
Setting the Rear View Camera
PAS TYPE: Parking guideline setting
- NOT USED: No use parking guideline
- PAS ON: Selecting Dynamic parking guide line
- PAS OFF: Selecting fixed parking guide line
PAS SETUP: Adjusting the position of the parking guide line
<H-POSITION> <V-POSITION>
REAR TYPE: Choose rear camera recognition.
- CAN: Reverse Camera is triggered by CAN when shifting into reverse.
CAN wire of module must be connected to CAN wire of car.
- LAMP: Reverse Camera is triggered when the reverse light turns on.
Connect “Rear-C” cable of the power cable the reverse light.
SAFE ENABLE: ON = VIMfeature is turned OFF.
OFF = VIMfeature is turned ON.
Multimedia Integration Interface for
FORD Vehicles with Sync 3 Systems
MRVFD-79Q
Crux Interfacing Solutions
www.cruxinterfacing.com
tel. #: [phone]
fax #: [phone]
6 / 8 rev.012317

Select NAVI and CAR MODEL
NAVI MODEL: Select RGB Navigation model
CAR MODEL : Select car models.
- SYNC3 : F150, EXPLORER, MUSTANG
- SYNC3 TYPE2 : FOCUS
AV OUT SELECT :Select Aux Audio from AV Modes
HDMI SKIP : Skip HDMI mode
FACTORY RESET : Set back to factory defaults
Setting for other options
IMAGE
PARK
UT IL1
UT IL2
INFO
NAV I MODEL
CAR MODEL
AVOUT SELECT
HDMI SKIP
FACT ORY RESET
Menu of FACT ORY
MENU t o Return SEL to Select/Save
IMAGE
PARK
UT IL1
UT IL2
INFO
IR- DAT A MODEL
TOUCH ENABLE
IR- DAT A MEMORY
CALIBRAT E
Menu of FACT ORY
MENU t o Return SEL to Select/Save
IMAGE
PARK
UT IL1
UT IL2
INFO
SYST EM V ERSION
(MAIN - 130723)
(T RIP - 130723)
Menu of FACT ORY
MENU to Return SEL to Select/Save
IR DATA MODEL : Resistor IR Memory of DVD, DTV
(Default, User)
TOUCH ENABLE : Activate/Deactivate
UI remote touch
IR DATA MEMORY : Enter Remote values
of DTV, DVD
CALIBRATE: Activate Touch calibration
Refer to IR manual for IR settings
Check product version
Multimedia Integration Interface for
FORD Vehicles with Sync 3 Systems
MRVFD-79Q
Crux Interfacing Solutions
www.cruxinterfacing.com
tel. #: [phone]
fax #: [phone]
7 / 8 rev.012317

Change modes via OEM button on Ford FOCUS Only
SOUND button
Long press–Switch Modes
Short press – Return to OEM mode
Short press while in Rear camera mode
Aftermarket rear camera ↔ OEM rear camera
CAR MODEL - SYNC3 TYPE 2
8 / 8 rev.012317
Multimedia Integration Interface for
FORD Vehicles with Sync 3 Systems
MRVFD-79Q
Crux Interfacing Solutions
www.cruxinterfacing.com
tel. #: [phone]
fax #: [phone]