danalock BT100 Circle User manual

User guide
!
DanaLock
BT100 Circle
BT100 Square
BTZE100 Circle
BTZE100 Square
!
Bluetooth Smart
!
!

!
!
Congratulations on your new Bluetooth Smart DanaLock.
!
This unique product gives you the opportunity to, in an instant; make your existing door
lock wireless.
Operate the DanaLock directly from your smartphone using Bluetooth Smart.
You can send new virtual keys to anyone you like with a compatible smartphone using the
web interface.
Follow us on Facebook, Twitter, Pinterest and Instagram for more updates on what’s to
come and more nice features for your DanaLock.
We thrive to have a generic product and to keep you up to date with your DanaLock
For guide to the WEB interface please visit our download page.
!
!2

Index:
Unpack your DanaLock 4
Activating the batteries 4
Inserting new batteries 5
DanaLock circle 5
DanaLock Square 5
Start operating your DanaLock 6
For initial installation of your Danalock: 9
Configuring the Danalock for your door 15
General DanaLock user settings: 16
Battery settings: Only for DanaLock Circle 19
Bluetooth Smart settings: 21
Z-Wave DanaLock 26
Unpack your DanaLock 26
Activating the batteries 26
Inserting new batteries 26
DanaLock circle 26
DanaLock Square 26
Start operating your DanaLock 27
Including the DanaLock to your Z-Wave network 27
Configuring the DanaLock for your door 28
!3

Unpack your DanaLock
Take out the unit from the box and insert the batteries in your DanaLock.
Activating the batteries
Your DanaLock comes with inserted batteries. You only have to activate the batteries.
DanaLock Circle: Remove the folio on top of the batteries. Push the touch button on the
face plate, and see the DanaLock operate to make sure you’ve done this correctly.
DanaLock Square: insert the pin connector to the plug in the PCB, be sure not to damage
the plug in the PCB.
!
!
!4

Inserting new batteries
DanaLock circle
When inserting your batteries, make sure they are all pointing the right direction.
Remove the face plate by using the included screwdriver
Remove the battery holder
Insert the batteries - all batteries must point the + pole upwards as shown below:
Screw on the battery holder back on, using the included screwdriver.
DanaLock Square
Remove the faceplate, pushing down the slide on the top of the DanaLock, using the
screwdriver included
Insert the connector on the battery to the plug as shown below, be care full not to
damage the connector, the insertion should run fairly smoothly:
!
!5

Start operating your DanaLock
Move your smartphone in the nearby of the Danalock, the Bluetooth Smart range should
default be approximately 3 meters.
Download the DanaLock app: LINK
Open your DanaLock App.
!
Push the “Create new user” line
!
!6

Create a new user, with your personal information:
Scroll to the button and push “SEND”
!7

Now the app will search for DanaLocks in the Bluetooth Smart range of the
phone.
If you do not have any DanaLock in the proximity it will show a blank key chain.
If you do have DanaLocks already connected to your account, these will show up in your
keychain.
They will be douched if they are out of connectivity. See next page.!
!8

For initial installation of your Danalock:
!
Iphone:
Press the “Menu” button in your top left corner
!
!
!
!9

Press the button “Add new lock”
!
!10

The App will now search for new locks in the nearby, and you will be able to
choose the unit you wish to install.!
!11

Press “Install” on the unit you wish to install
!
!12

You will now have to name your unit, you can always change the name in the WEB
interface.
Type the name in field “Name your lock” and press:
The app will tell it is communicating with your DanaLock.
You will hear a beeping sound confirming everything went well, and you will get
confirmation:
!
!13

If the DanaLock does not show up i your key chain, then go to the menu, in the
top left corner and press “refresh keys”
!
!
!
!
!
!
!
!
!
!
Now the your DanaLocks will show up in you key chain and is ready to use, press red and
green to lock and unlock.
!
!
!14

Configuring the Danalock for your door
To open setting swipe to the left on the DanaLock you wish to configure.
Now you see 3 options:
Press the tooth wheel
The Smartphone will now communicate with your DanaLock to get the user configuration
currently in your DanaLock.
Remember you will have to stay i Bluetooth Smart proximity to configure your settings.
!
!15

Know you have 3 settings options, push either to enter:
!
General DanaLock user settings:
!
This gives you the possibility to configure:
!16

Mode: Powersaving - less torque - this will due for most locks
Normal: More torque - just give the extra edge
Direction: Which direction should the DanaLock operate when you press
lock? Clockwise or counter clockwise
Turn degrees: How many degrees shall the DanaLock turn for locking and
unlocked, you can put in any number you need.
Auto-Lock time: You can make the DanaLock auto lock when you have unlocked
it. The number indicates after how many seconds the DanaLock
shall lock e.g. 10 seconds.
Speed: How fast should the DanaLock operate? Be aware that turning up
the speed will lower the torque.
Sound: Turn on and off the audio indicator
!17

Press “SAVE” when finished, make sure communication is ok with the Danalock,
you will return to your keychain, and you will get an audio indication that everything went
well.
!
!18

Battery settings: Only for DanaLock Circle
This option is to setup the battery being used and how the low the battery shall run before
you get an alarm indication:
Choose type: “3.6 volt” When using original DanaLock Lithium Chloride
CR123 batteries
“3.0 Volt” When Using regular CR123 Batteries, Be aware - When
using standard batteries, always choose batteries
with high capacity
!19

Alarm: How low should the batteries go before you get an alarm - we
recommend alarm round 30% to be sure to have the time to
switch the batteries.
Press “SAVE” when finished, make sure communication is ok with the Danalock, you will
return to your keychain, and you will get an audio indication that everything went well.
!
!
!20