danalock Danapad V3 User manual

Danapad V3
www.danalock.com

3

4 5
2x
2x

6 7
4x AAA

8 9

10 11

12 13

14 15
guide.danalock.com
The following instructions are in english. Localized versions can be
found with the QR-code below.

16 17
Add the Danapad in the Danalock App
Open the Danalock App and add the Danapad by selecting ”Add
device” in the menu tab. When the Danapad has been enrolled you
can pair it with your Danalock.
Go to: Menu > Accessory devices > Danapad > Pairing
and select the lock you want to control with the Danapad.
Set up pin codes for your Danapad
Go to: Menu > Accessory devices > Danapad > Pin codes
and choose to add a new pin code.
******

18 19
Controlling the Danapad
The Danapad is ready to use when it has been paired with a
Danalock or Universal Module and has been set up with one or
more pin codes.
Unlocking: Press pin code followed by unlock button. Success will
respond with a single green blink.
Locking: Press pin code followed by lock button. Success will
respond with a single green blink.
Dismounting

20 21
LED signal LED color Status indication
Single green blink Performed operation successfully
Single red blink Operation canceled or failed
Long green blink Power on
Constant orange followed by green Firmware is being updated
LED-Signals
The keypad indicates the status of several operations with dierent
colors:
Operation Input action LED response
Turn on Danapad Insert batteries Display lights up green
Activate light only press unlock button Display lights up green
Clear input Hold unlock button Display blinks red once
Input timeout Input clears after 10 sec with
no input
Display blinks red once
Danapad lockout 5 invalid attempts causes a 2
min lockout
Display blinks red 3 times
Incorrect pin code length The entered pin code is
shorter than 4 digits or longer
than 10 digits
Display blinks red once
Operations

22
Firmware upgrade
In the Danalock App navigate to your Danapad settings and select
”Firmware” and then ”Upgrade rmware”. Make sure to keep your
phone near the Danapad during the entire rmware upgrade
process.

www.danalock.com
Danalock International ApS
Gammel Stillingvej 427C
8462 Harlev, DK
[phone]
[email protected]
PADV3-EN-2018/09/13