Degelman Tri-Plex Landroller 7645 User manual

MANUAL
142592

272 Industrial Drive, Box 830
Regina, Sask. Canada S4P 3B1
Toll Free: 1-800-667-3545
306 543-4447 543-2140 fx
Email: [email protected]
www.degelman.com
Hitchpole, centre frame 1
Centre frame wheels & roller 3
Centre & wing frames 5
Wing frame wheels & roller 9
Hydraulics 11
Clearance lights 13
Operations 15
Safety, warranty 17
SAFETY
142592
The safety instructions that follow
pertain only to this specific
equipment. You should be aware
of agricultural & industrial safety
especially related to heavy
equipment. If you are not familiar
with safety procedures then you
should get training.
Improper use will result in maiming
or death.

18
16
17 18
15
2
1
9
10
11
3
12
14
13
5
4
1
7
86
19
142592
p1
Hitch pole & centre frame

3
5
4
Qty
2
1
142592
p2
1 244801 Centre frame 1
2 244300 Hitch pole 1
3 243768 Pole pin 2
4 118034 Bolt 5/8 x 3-1/2 2
5 118447 Lock nut 5/8 UNITQ 2
6 132001 Rachet jack 1
7 132009 Jack handle 1
8 118829 Hair pin 8
9 132032 Pin 1 x 2-1/8 EFF 2
10 244327 Floatation plate 1
11 243771 Bent pin 1
12 118901 Lynch pin 1
13 244303 Bolt 1-1/4 x 5 c/w ftg 4
14 118445 Lock nut 1-1/4 1
15 132050 Sidewind jack 1
16 133100 Manual holder 1
17 118123 Bolt 1/4 x 1 4
18 118555 Flat washer 1/4 8
19 118483 Lock nut 1/4 4
Floatation
plate
11
/
4
Field
Transport
118335 Grease fitting
Grease point
Every 25 hrs
USE
TRANSPORT
PIN
Store
transport pin

13
Grease point
Every 25 hrs
14
10
9
17
11
15
18
20
19
21
22
16
2
12
4
3
1
7
5
9
8
8
23
6
142592
p3
Centre frame,
wheels & roller
Store hyd cyl
transport lock

24
25
26
27
28
29
31
32
33
34
35
36
30
23
Qty Qty
Per wheel
The wing rollers use the same bearing system
142592
p4
1 243501 Centre roller 1
2 117006 Bearing 2
3 117022 Lock ring 2
4 117106 Bearing insert 2
5 117107 Flange casting 2
6 243604 Bushing 2
7 118026 Bolt 5/8 x 2 8
8 118508 Lock washer 5/8 8
9 118407 Nut 5/8 8
10 244810 Rockshaft 1
11 110042 Cast bearing cap 4
12 110040 Cast bearing base 4
13 118083 Bolt 3/4 x 7 1/2 8
14 611080 Shim 8
15 118516 Flat washer 3/4 8
16 118422 Lock nut 3/4 8
17 131062 Wheel 4
18 118914 Whl bolt 9/16 x 1 3/4 24
19 127003 Tire 9.5Lx15 6ply 4
20 127006 Valve TR415 4
21 131001 Rim 15 x 8 6 bolt 4
22 118651 Jam nut 9/16 UNF 24
23 131324 Hub & spindle 4
24 118835 Cotter pin 1
25 131701 Dust cap - CTD 1
26 118423 Slotted nut 1 UNS 1
27 131020 Flat washer 1 SAE 1
28 131024 Cone bearing 1
29 131025 Bearing cup 1
30 131700 Hub H618G - CTD 1
31 131023 Bearing cup 1
32 131022 Cone bearing 1
33 131026 Dust seal 1
34 131322 Spindle 1
35 118082 Bolt 1/2 x 3 1/2 1
36 118420 Lock nut 1/2 UNITQ 1

4
5
5
15
6
10
10
12
9
13
14
17
7
8
1
2
3
4
5
3
8
7
20
16
16
11
142592
p5
Centre & wing frames
Centre
frame
Truss
arm
Wing
frame
Hydraulic cylinder
31/2x16x11/2

20
20
Grand total
QtyQty
18
19
22 21
142592
p6
1 244302 LH wing frame 1
243301 RH 1
2 243727 LH auto fold latch 1
243726 RH 1
3 118082 Bolt 1/2 x 3 1/2 2
4 273717 Autofold collar 2
5 118420 Lock nut 1/2 UNITQ 2
6 118628 Bolt 1/2 x 5 1/2 2
7 143034 Comp. spring 2
8 118512 Flat washer 1/2 2
5 Lock nut 1/2 UNITQ 2
9 244816 Cable 2
10 118835 Cotter pin 2
11 117996 Flat Washer M18 SAE 2
12 243001 Cable pin 2
13 243188 Eyebolt 5/8 x 5 1/4 2
14 118537 Flat washer 5/8 SAE 2
15 118447 Lock nut 5/8 UNITQ 2
16 117110 Bushing 1-1/4 x 3/4 4
17 243710 LH autofold arm 1
243709 RH 1
3 Bolt 1/2 x 3 1/2 2 4
4 Autofold collar 2 4
5 Lock nut 1/2 UNITQ 2 6
18 243748 Swing arm holder 2
19 118026 Bolt 5/8 x 2 8 16
20 118514 Flat washer 5/8 16
21 118508 Lock washer 5/8 8 16
22 118407 Nut 5/8 8 16

142592
p7
Centre & wing frames
10
9
11
12
13
14

1
3
3
2
2
4
4
7
Qty
142592
p8
1 243664 Cross joint 2
2 243773 Cross joint pin 4
3 118094 Bolt 5/8 x 4 4
4 118447 Lock nut 5/8 UNITQ 4
5 243719 Truss arm 2
6 118116 Bolt1x41/2 2
7 118510 Lock washer 1 2
8 118412 Nut 1 2
9 143111 Hose holder 1
10 118026 Bolt 5/8 x 2 1
11 118514 Flat washer 5/8 1
12 118508 Lock washer 1
13 118407 Nut 5/8 1
14 116255 Safety chain 1
6
57
8

10
16
11
12
13 15
14
Install roller as with
centre frame 1
2
Qty
Per
wheel
Grand
total
142592
p9
10 131062 Wheel 2
11 118914 Whlbolt9/16x13/4 12
12 127003 Tire 9.5Lx15 6ply 2
13 127006 Valve TR415 2
14 131001 Rim 15x8 6 bolt 2
15 118651 Jam nut 9/16 UNF 12
16 131348 Hub & bent spindle 2
17 118835 Cotter pin 1
18 131701 Dust cap - CTD 1
19 118423 Slotted nut 1 UNS 1
20 131020 Flat washer 1 SAE 1
21 131024 Cone bearing 1
22 131025 Bearing cup 1
23 131700 Hub H618G - CTD 1
24 131023 Bearing cup 1
25 131022 Cone bearing 1
26 131026 Dust seal 1
27 131349 Bent spindle 1
28 118900 Hitch pin 1
29 118901 Lynch pin 1
Qty
1 243753 Wing roller 2
2 244311 LH end wheel strut 1
244310 RH 1
4 244303 Bolt 1 1/4 x 5 c/w ftg 4
5 118445 Lock nut 1 1/4 4
6 244314 Upper link plate 2
7 244306 Link bar 4
4 Bolt 1 1/4 x 5 c/w ftg 6 10
5 Lock nut 1 1/4 6 10
8 117087 Bushing 1 1/4 x 1 1
9 117110 Bushing 1 1/4 x 3/4 1
Wing frame,
wheels & roller

8
9
6
7
7
Hydraulic cylinder
31/2x16x11/2
2
4
5
5
4
4
17
18
19 20
21
22
23 24 25
26
27
28
29
5
5
4
142592
p10
118335 Grease fitting
Grease point
Every 50 hrs
Store hyd cyl
transport lock

1
34
5
6
7
8
9
78
9
Qty
10
2
11
12
13
14
15
142592
p11
Hydraulics
1 121803 Barrel 1
2 122658 Lock ring 1
3 122656 Open cap 1
4 122099 Rod & clevis 1
5 122663 Piston 1
6 118441 Lock nut 7/8 UNF UNITQ 1
7 118930 Clevis pin 2
8 118924 Lock washer 1/2 2
9 118796 Bolt 1/2 x 1 2
10 122522 Seal kit 3 1/2 x 1 1/2 1
11 243990 Transport lock 4
12 243500 Wire lock pin 4
13 780278 Hose clamp 22
14 780279 Top plate 22
15 118144 Bolt 5/16 x 1 1/2 22
122728 3 1/2 x 16 x 1 1/2 Cylinder four per machine
Store transport lock
Grease point
Every 25 hrs
USE
TRANSPORT
LOCK

Qty
Qty
142592
p12
(296)
(296)
Ports face up
Ports face up
(224)
(75)
(75)
(204)
141576 Coupling 1/2 NPT (male tip) 2
141514 Nipple (M) 1/2 NPT x 3/4 JIC 2
141501 Tee 3/4 JIC M 2
141505 Tee 3/4 M JIC x JIC x ORB 4
141504 Elbow 3/4 M JIC x ORB 4
(Hose length in inches)
126550 Hose 3/8 x (75) 2
126636 Hose 3/8 x (224) 2
126579 Hose 3/8 x (204) 2
126637 Hose 3/8 x (296) 4

142592
p13
Orange
Red
Make sure
blank faces forward
colours face back
10
11&15
12
13
14
16
17
18
19
20 21
22
23
24
25
Qty
Qty
26 27
28
26
27
28
29
1 129027 7 Pole plug 1
2 244504 16/4 SuperVU line 8ft 1
3 244506 Junction box 1
4 129033 Straight cord conn. 3
5 118717 Plastic locknut 1/2 NPT 3
6 129035 Terminal strip 5 conn. 1
7 118716 Screw #8, 3/4 2
8 118735 Screw 1/4 self-tap 2
9 118588 Rubber washer 3/16ID 2
10 244503 16/3 SuperVu line 50ft 2
11 244505 Loom 60 2
12 129042 Clamp 3/8 cushion 2
13 244507 Grommet 3/8 2
14 129041 Grommet 1/4 2
15 246163 Loom 24 2
16 129043 Butt splice crimp 16ga 2
17 129022 Triplug 18 2
18 129021 LH Dual lamp 1
129020 RH 1
19 243776 Lamp/SMV brkt, left side 1
20 118756 Bolt 1/4 x 1 1/4 8
21 118483 Lock nut 1/4 8
22 142135 SMV sign 1
23 118123 Bolt 1/4 x 1 2
24 118533 Lock washer 1/4 2
25 118402 Nut 1/4 2
26 118009 Bolt 1/2 x 1-1/4 4
27 118504 Lock washer 1/2 4
28 118405 Nut 1/2 4
29 243777 Lamp brkt, right side 1
Clearance lights
Right side
Left side

142592
p14
7 POLE
PLUG 16/4 WIRE JUNCTION BOX 16/3 WIRE TRIPLUG
G
Y
G
B
R
W
brown
G
B
W
G
B
W
R
W
brown
RH turn
LH turn
Right wire
Left wire
Ground
Tail
Amber light
Ground
Red light
Splice
Cut loom for
Triplug
4
4
4
3
5
3
5
5
6
7
8
9
10
10
10
10
11
13
14
15
16
17
18
2
22
1
1
12

142592
p15
Transport
PREPARE
Take off transport locks
Set floatation plate to
field position
Cable taut
Latch open
Latch closed
SET LATCH CLOSED
Drop drums with wings almost out
Back up until wings all the way out
then wing arm clicks in
Cable slack
A
D

142592
p16
Field
ANGLE OUT
TRANSPORT WHEEL
Drop roller
Turn axle
Lift roller
BRING WINGS OUT
Back up slowly
B
C
AUTOFOLD LATCH ADJUSTMENT:
After a while the cable will stretch and the
latch won’t open to free the Swing Arm.
To adjust, have the wings out. With the swing
arm pipe in the latch and the latch open just
enough for the swing arm to clear adjust the
nut on the eyebolt. That is the correct degree
of tension for the cable

KILLED, INJURED
or SAFE?
YOUR CHOICE
Safety
HYDRAULICS
You are responsible for your own
safety. If you don’t know basic
agriculture & industrial safety, find
out.
Owners of equipment must by law
give operating instructions to other
operators such as family members or
a hired hand.
Making any design changes to
equipment could cause a hazard and
damage your machine.
Wear proper safety equipment. Have
handy first aid kit & fire extinguisher.
Before working on machine:
Turn tractor off
Set controls in neutral
Remove ignition key
Clean all reflectors and lights.
Keep all parts clean
Replace worn or damaged parts
Don’t try any makeshift repairs
Before operating check that
everything is tight and not
broken.
Wear gloves and eye protection
when searching for leaks. Use a
piece of wood or cardboard but
not your hand. High pressure oil
will penetrate your skin. If that
happens you risk
serious injury.
10 HRS
Hyd. fluid leaks
Damaged hoses
Tire pressure
36 PSI
25 HRS
Lube points indicated
50 HRS
Working points & pins
Safety signs clean
ANNUAL
Bolt tightness
Wheel bearings
Latch mechanism
Cable assembly
Use Safety Lights
When in transport
position make sure
transport pin is in place
Clean SMV sign and
reflectors.
TRANSPORTING
?
All hardware - Hex head, Plated, Gr.5 UNC
Hoses - 3/8 female swivel JIC
Unless stated otherwise
Gr.8
3/8 46 lb-ft
5/8 225
3/4 400
7/8 650
Hyd. fitting
3/4 75 lb-ft
Gr.8.8
M8 20 lb-ft
M10 40
Gr.10.9
M24 850 lb-ft
TORQUE SETTINGS
MAINTENANCE
DECAL REPLACEMENT
It is important to understand
and follow the information
found on all safety decals.
If safety decals are damaged,
missing, or illedgible they
must be replaced.
Replacement decals are
available by request.
Call toll free: 1.800.667.3545
START UP AND
ONGOING CHECK LIST:
Grease all fittings
Check all bolt tightness
Repeat after a days use and
check for hydraulic leaks
Retorque bolts
Adjust hitch height; Set trailer
so it is parallel to ground
Use a drawbar pin with
mechanical retainer
Check tire pressure (36 PSI)
Oil level in tractor’s hydraulic
reservoir.
Inspect lines, hoses, fitting &
couplers. Wipe couplers with
clean cloth.
142592
p17
Decal # Decal Description Qty
142008 Decal, Degelman 6 x 25 3/4 IN 3
142383 Decal, Caution - 6 Point Safety 1
142387 Decal, Important - Remove Transport Bar 4
142422 Decal, Danger - Stay Clear Crushing Hzd. 1
142454 Decal, Important - Position Float Plate 1
142455 Decal, Important - End Wheel 2
142557 Decal, Reflector - Amber 2 x 9 IN 6
142571 Decal, Landroller 7645 2
143162 Decal, Read Operators Manual 1

WARRANTY
Degelman Industries warrants this product to the original owner for a period of one (1) year parts and labour and two (2)
years parts from the date of purchase. All matters related to the warranty of our products must be handled through the
authorized selling dealer.
Warranty does not cover normal wear of the machine components or damages caused by lack of maintenance or misuse,
and is subject to the following provisions.
REPLACEMENT PARTS:
Will be warranted for a period of ninety (90) days.
WARRANTY ON MACHINES USED FOR CUSTOM WORK, RENTALS OR INDUSTRIAL USE:
Will be warranted as stated above, with the exception that it will be for a period of ninety (90) days only.
TIRES:
Will be adjusted for warranty by tire manufacturer.
LABOUR:
Any labour subject to warranty must be authorized by a Degelman representative before work is started. Warranty labour
allowance and rates will be handled according to established warranty service policy.
GOVERNMENT LEGISLATION:
Warranty terms and conditions are subject to Provincial or State legislation.
MODIFICATIONS:
Warranty will be void if any component is altered or modified, unless written authorization is granted by Degelman
Industries Limited.
WARRANTY ON ATTACHED EQUIPMENT:
No responsibility will be assumed for whatever damages may occur to persons, tractors or property.
1425920104 p18