Dorma TS93 T User manual

M5 HEX KEY
M5 HEX KEY
(REFERENCE UNIT CARTON LABEL FOR ACCESSORIES AND OPTIONS SUPPLIED)
TS93 T, TH
PULL SIDE TRACK MOUNT
Determine hand of door and unit type supplied,
(93T, 93PT). Prepare door and frame for fasteners
1
according to template 08279222.
2
3
4
LEFT HAND DOOR RIGHT HAND DOOR
Attach mounting plate to door, using lower four QTY
(4) WOOD
DOORS
METAL
DOORS
RIGHT HAND DOOR LEFT HAND DOOR
QTY
(4)
Attach closer to mounting plate. QTY
(4)
RIGHT HAND DOOR LEFT HAND DOOR
QTY
(1)
RIGHT HAND DOOR
Attach arm to pinion of closer, parallel to door.
holes in plate. Use upper four holes for optional
mounting. Arrows on plate face top of door.
MANUFACTURER'S LISTINGS.
ALTERNATIVE METHOD IS IDENTIFIED IN THE INDIVIDUAL DOOR
CAUTION: SEX NUTS ARE REQUIRED FOR ATTACHMENT OF
COMPONENTS TO UNREINFORCED DOORS AND TO WOOD
OR PLASTIC FACED COMPOSITE TYPE FIRE DOORS, UNLESS AN
LEFT HAND DOOR
INSPK NO. 08279220 Rev.03/08
www.dorma-usa.com 1-800-523-8483 03/08 PAGE
Description:
INS NO. Rev.
08279221 1 of 3

screw and tighten securely. Install track cover.
Attach arm to slide shoe.
Align hole in arm with slide shoe in track. Insert
QTY
(1)
M5 HEX KEY
(93T, 93TH)
56
6
QTY
(2) WOOD
FRAME
METAL
FRAME
L HINGES
C
(93TH UNITS ONLY)
SLIDE SHOE
track, and tighten screws.
(93T UNITS ONLY)
Insert slide shoe and track end blocks into
Assemble track and attach to frame.
end blocks into track. Tighten mounting
Insert slide shoe, hold open mechanism and track
IMPORTANT : L HINGE
C
NOTE: HOLD OPEN MECHANISM AND SLIDE SHOE MUST
BE INSTALLED WITH ARROWS POINTING AWAY
FROM THE DOOR HINGES. (ARROWS ARE
STAMPED ON SLIDE SHOE & HOLD OPEN
MECHANISM)
HOLD OPEN MECHANISM
Adjust sweep, latch, backcheck and delayed
action valves.
1 - SWEEP speed from
2 - LATCH speed from approx.
70° to 0°
7° to 0°.-(INCREASE ONLY)
DECREASE
INCREASE SWEEP
RANGE
LATCH RANGE
CAUTION: DO NOT REMOVE VALVES.
BACKCHECK RANGE
4 - DELAY speed from max opening 180° to 70°
CAUTION: DO NOT CLOSE VALVE COMPLETELY.
DECREASE
INCREASE
BACKCHECK (INTENSITY)
3 - BACKCHECK cushion effect.
142 3
(2)
QTY BRACKET
TRACK MOUNTING
bracket screws. Attach track assembly to frame.
Attach track assembly to frame.
TRACK END BLOCKS
DELAY
ACTION
RANGE
SLIDE
TRACK
END BLOCK
SHOE
SLIDE
TRACK
END BLOCK
SHOE
SHOCK BLOCK
L HINGES
C
SHOCK BLOCK
INS NO. PAGE Rev.
08279221 2 of 3 03/08

Install cover.
screw.
Secure with (1) 4-40 locking
TAB
COVER
cover onto plate.
END COVERS
end caps.
Slide end covers over closer body
REMOVE
Remove tab that aligns with arm hub. Slide
8
adjusted to meet barrier-free forces may not have sufficient
Take an opening force reading from
CAUTION: DO NOT OVERTIGHTEN
to meet the barrier-free requirement. Maximum number of
clockwise =12. Depending on opening conditions, a door
turns counter clockwise=5. Maximum number of turns
power to reliably close and latch the door.
ULC LABELED UNITS "ONLY"
NON-BARRIER-FREE OPENINGS:
Adjust according to chart.
Adjust according to chart.
Adjust spring tension, if required.
TS93-1 supplied with a size 2 spring setting.
CRITICAL
the pull on the door. If required, adjust the spring tension
REFERENCE LABEL ON CLOSER FOR MINIMUM/MAXIMUM SETTINGS
BARRIER-FREE OPENINGS -
+
-
+12
200 5
WEIGHT (LBS)
CLOSER
TS93-1
TYPE
100
150
125
DOOR
4'
3'6"
3'
2'6"
3'6"
MAX.
3'
2'6"
---
SPRING
ADJUSTER
OF SPRING
2
4
3
SIZE
0
+9
+3
FULL TURNS
+12
+3
+9
0
5
3
4
2
SPRING ADJUSTER
FULL TURNS OF
INT.
DOOR WIDTH
EXT. CLOSER
SIZE
M5 HEX KEY
NOTE:
TS93-5 supplied with a size 6 spring setting.
NOTE:
Maximum number of turns clockwise = 6
TS93-1
0
SPRING ADJUSTER
FULL TURNS OF
4'
4' 6"
TS93-5 DOOR WIDTH
EXT.
3' 6"
INT.
4' -4 6
CLOSER
SIZE
5
0
-4
5
6
200
250
TS93-5
INS NO. PAGE Rev.
08279221 3 of 3 03/08
7
9(HOLD OPEN UNITS ONLY) Set hold open.
To enable hold open,
into the hold open
mechanism.
To disable hold open,
pull the white slide away
from hold open mechanism.
M2.5 HEX KEY
To adjust hold open
force, turn clockwise to
counter clockwise to
weaken force.
increase force, and
B
M2.5 HEX KEY
Place the hold open
mechanism in desired
position. Tighten screws
#1 and #2 securely.
A
2
1
C
ONOFF
push the white slide

QTY
(1)
RIGHT HAND DOOR
LEFT HAND DOOR
Place wrench on bottom pinion and rotate pinion 5° as shown. With main arm
PINIONROTATE
5° CLOCKWISE
PINION PINION
parallel to door, place main arm onto top pinion. Fasten securely with pinion screw.
M5 HEX KEY
M5 HEX KEY
5° COUNTER-
CLOCKWISE
ROTATE PINION
4
www.dorma-usa.com 1-800-523-8483
ALTERNATIVE METHOD IS IDENTIFIED IN THE INDIVIDUAL DOOR
(REFERENCE UNIT CARTON LABEL FOR ACCESSORIES AND OPTIONS SUPPLIED)
TS93 PT, PTH
PUSH SIDE TRACK MOUNT
Determine hand of door and unit type supplied,
(93PT, 93PTH). Prepare door and frame for
1
fasteners according to template 08279212.
2
3
LEFT HAND DOOR RIGHT HAND DOOR
QTY
(4) WOOD
DOORS
METAL
DOORS
LEFT HAND DOOR RIGHT HAND DOOR
QTY
(4)
Attach closer to mounting plate.
LEFT HAND DOOR
QTY
(4)
RIGHT HAND DOOR
INSPK NO. 08279210 Rev.02/10
mounting. Arrows on plate face top of door.
holes in plate. Use upper four holes for optional
Attach mounting plate to door, using lower four
MANUFACTURER'S LISTINGS.
COMPONENTS TO UNREINFORCED DOORS AND TO WOOD
OR PLASTIC FACED COMPOSITE TYPE FIRE DOORS, UNLESS AN
CAUTION: SEX NUTS ARE REQUIRED FOR ATTACHMENT OF
PAGE
Description:
INS NO. Rev.
08279211 02/10
1 of 3

QTY
(1)
M5 HEX KEY
(93T, 93TH)
56
8
L HINGES
(93PTH UNITS ONLY)
C
(93PT UNITS ONLY)
Assemble track and attach to frame.
IMPORTANT :
L HINGE
C
NOTE: HOLD OPEN MECHANISM AND SLIDE SHOE MUST
BE INSTALLED WITH ARROWS POINTING AWAY
FROM THE DOOR HINGES. (ARROWS ARE
STAMPED ON SLIDE SHOE & HOLD OPEN
MECHANISM)
ANGLE
LEFT HAND DOOR BRACKET
(3)
QTY
QTY
(2) TRACK
METAL
FRAME
WOOD
BRACKET FRAME
Attach angle bracket to soffit. Insert slide shoe,
rubber stop, hold open mechanism and track
end blocks into track and tighten screws.
Attach track assembly to angle bracket by
attaching screws through end blocks to angle
bracket.
SLIDE SHOE
HOLD OPEN MECHANISM
ANGLE BRACKET
END BLOCK
42
13
1 - SWEEP speed from
3 - BACKCHECK cushion effect.
BACKCHECK (INTENSITY)
CAUTION: DO NOT CLOSE VALVE COMPLETELY.
4 - DELAY speed from max opening 180° to 70°
7° to 0°.-(INCREASE ONLY)
2 - LATCH speed from approx.
INCREASE
DECREASE
70° to 0°
BACKCHECK RANGE
CAUTION: DO NOT REMOVE VALVES.
INCREASE
DECREASE LATCH RANGE
RANGE
ACTION
DELAY
RANGE
SWEEP
Adjust sweep, latch, backcheck and delayed
action valves.
SHOCK BLOCK
QTY
(2) TRACK
BRACKET
Attach arm to slide shoe.
Align hole in arm with slide shoe in track. Insert screw and
tighten securely.
SLIDE
SHOE
TRACK END BLOCK
SHOCK
BLOCK
Attach angle bracket to soffit.
Insert slide shoe, rubber stop and end blocks
into track, and tighten screws.
Attach track assembly to angle bracket by
attaching screws through end blocks to angle
bracket.
7Install track cover by sliding it over track assembly.
Cover will snap into place when fully installed.
08279211 2 of 3 02/10
INS NO. PAGE Rev.
INS NO. PAGE Rev.

9
10
11 (HOLD OPEN UNITS ONLY) Set hold open.
To enable hold open,
into the hold open
mechanism.
To disable hold open,
pull the white slide away
from hold open mechanism.
M2.5 HEX KEY
To adjust hold open
force, turn clockwise to
counter clockwise to
weaken force.
increase force, and
B
M2.5 HEX KEY
Place the hold open mechanism in desired
position. Tighten screw securely.
A
C
ONOFF
push the white slide
adjusted to meet barrier-free forces may not have sufficient
Take an opening force reading from
CAUTION: DO NOT OVERTIGHTEN
to meet the barrier-free requirement. Maximum number of
clockwise =12. Depending on opening conditions, a door
turns counter clockwise=5. Maximum number of turns
power to reliably close and latch the door.
ULC LABELED UNITS "ONLY"
NON-BARRIER-FREE OPENINGS:
Adjust according to chart.
Adjust according to chart.
Adjust spring tension, if required.
TS93-1 supplied with a size 2 spring setting.
CRITICAL
the pull on the door. If required, adjust the spring tension
REFERENCE LABEL ON CLOSER FOR MINIMUM/MAXIMUM SETTINGS
BARRIER-FREE OPENINGS -
+
-
+12
200 5
WEIGHT (LBS)
CLOSER
TS93-1
TYPE
100
150
125
DOOR
4'
3'6"
3'
2'6"
3'6"
MAX.
3'
2'6"
---
SPRING
ADJUSTER
OF SPRING
2
4
3
SIZE
0
+9
+3
FULL TURNS
+12
+3
+9
0
5
3
4
2
SPRING ADJUSTER
FULL TURNS OF
INT.
DOOR WIDTH
EXT. CLOSER
SIZE
M5 HEX KEY
NOTE:
TS93-5 supplied with a size 6 spring setting.
NOTE:
Maximum number of turns clockwise = 6
TS93-1
0
SPRING ADJUSTER
FULL TURNS OF
4'
4' 6"
TS93-5 DOOR WIDTH
EXT.
3' 6"
INT.
4' -4 6
CLOSER
SIZE
5
0
-4
5
6
200
250
TS93-5
08279211 3 of 3 02/10
INS NO. PAGE Rev.
Install cover.
Remove tab that aligns with arm hub. Slide
REMOVE
Snap end covers to closer body
end caps.
END COVERS
cover onto plate.
COVER TAB
Secure with (1) 4-40 locking
screw.