Drive Phoenix HD Operator's manual

Securethearmrestsinplacewiththeprovided
starknobsat the desired width.
Setthebatterypackontothescooterdirectlyin
front of the seat post. Lock the battery pack in
place by rotating the dial on the pack to the
lockedposition.
Remove your scooter from its packaging.
Loosenthetilleradjustmentknob,raise the tiller
tothedesiredangle and retighten the knob.
Attachthe front basket by aligning the bracket
on the tiller with the mounting holes on the
basket.Thenpushdowntosecure in place.
Fullycharge the scooter’sbatteries byinserting
the round charger connector into either the
charging terminal on the scooter’s battery pack or
theterminal locatedonthescooter’stiller.Theninsert
the 3-pronged plug into a standard electrical outlet.
Besure to charge the scooter for 8-10 hoursbefore
firsttimeuse.
1. 2. 3. 4.
5. 6. 7. 8.
Quick Start Guide
Phoenix HD 3 & 4 Wheel
Please Read Before Operating!
For technical assistance, call toll free [phone] or [phone].
Insertthearmrests into the attachement points
in the seat frame so that the armrests face
forward.
Whileliftingup on the seatreleaselever,place
the seat onto the seat post. Release the lever
androtatethe seat until it locks into place.
Remove the clear plastic insert from the area
where the battery pack connects on the front
shroud.

Your Phoenix HD Scooter is designed to be easily disassembled into 5 pieces
for convenient transport or storage.
The pieces are:
•Front Section (heaviest piece, 40 lbs.) •Rear Section •Battery Pack
•Seat •Front Basket
To disassemble your scooter:
1. Turn key switch to “OFF.”
2. Engage front wheel lock.
3. Place the freewheel mode lever in the “Drive” position.
4. Pull upward on the swivel-release lever to remove the seat from seat post.
5. Pull up on the battery pack to remove it from the scooter.
6. Pull up on the release lever to separate the front and rear sections.
Phoenix HD Quick Start Guide
READ BEFORE UNPACKING
This Quick Start Guide offers basic information on initial product
setup only. Read the owner’s manual and all supplemental
information thoroughly before operating the product for
information on safety, battery charging, basic operation, comfort
adjustments, disassembly and care and maintenance.
NOTE:The illustrations provided may not reflect your actual unit.
Before use, make sure that the scooter’s
freewheelmode knob is pushed downinthe
“drive”position.
READ
THIS
FIRST!
9.
For information on the
comfort adjustments available
on your scooter, please
consult your owner’s manual.