Dura Trel 11137 User manual

Dura-Trel, Inc. ~ PO Box 122, Sheboygan Falls, WI 53085 ~ Toll Free 877-258-6020
#11137
BENCH MOUNTING kit
INSTRUCTIONS
MOUNTING INSTRUCTIONS
Set assembled bench in desired location. Slide the two 5 ½” brackets under back legs of bench and
the two angled brackets under the front legs. With 1 ¼” screws fasten brackets to pier or deck.
With bench setting on brackets, use the ¼” drill bit to drill holes through bench legs, using the
predrilled holes in brackets as your guide. Fasten bench to brackets using 2 ¼” bolts, washers and
nylock nuts.
If you encounter missing or defective parts, please contact manufacturer direct at
toll free # below.
MATERIAL LIST
2 – #4TBCK-05500 5 ½" Back Leg Brackets
2 – #4TBCK-05750 5 ¾" Angled Front Leg Brackets
8 – #7HDWR-14225 ¼ x 2 ¼” Bolts
16 - #7HDWR-08125 #8 x 1 ¼” Screws
16 – #7HDWR-14WSH ¼” Flat Washers
8 – #7HDWR-14NUT ¼” Nylock Nuts
1 – Bench Mounting Instructions
TOOLS NEEDED
Drill with ¼” Bit and #2
Phillips Bit
2 – 7/16” Wrenches or Sockets

Dura-Trel, Inc. – PO Box 122, Sheboygan Falls, WI 53085 – Toll Free 877-258-6020
PACKING LIST
#11137 BENCH MOUNTING KIT
PARTS CONTAINED:
QTY. PART NO. PART DESCRIPTION
2 4TBCK-05750 W 5.75” ANGLED BRACKETS
2 4TBCK-05500 W 5.5” BRACKETS
8 7HDWR-14225 ¼ x 2 ¼” BOLTS
16 7HDWR-08125 #8 x 1 ¼” SCREWS
16 7HDWR-14WSH ¼” FLAT WASHERS
8 7HDWR-14NUT ¼” NYLOCK NUTS
1 BENCH MOUNTING KIT INSTRUCTIONS
NOTE: Some parts may be packed inside of others.