Dura Trel Greenfield 11203 User manual

Model# 11203 Assembly Instructions
Part # Description
1 2" sq. x 48¼" Back Left Post
2 2" sq. x 48¼" Back Right Post
3 2" sq. x 38" Front Post
4 1½ x 4 x 46½" Table Support
5 1½ x 4 x 46½" Shelf Support
6 1½ x 4 x 20¼" Side Rail
7⅞ x 3 x 20¼" PtB Rail
8⅞ x 3 x 46½" Back Rail
9 1½ x 5½ x 46½" Back Rail
10 1½ x 5½ x 42½" Shelf Rail
11 10¾" Shelf Support Bracket
12 1½ x 5½ x 43" Table Top Rail
13 ⅞ x 1½ x 16½" Table Brace
14 16½" Table Top End Cap
PLEASE READ THROUGH BEFORE BEGINNING ASSEMBLY. 15 5½" Shelf End Cap
IMPORTANT: Check boxes for Contents Listed 16 Hardware Bag (includes:)
Check inside of parts as some parts are packaged 2" sq." Post Cap
inside of others
1¼" Painted Screw
¾" Painted Screw
In the event of missing, damaged or defective parts Super Glue Tube
please call our customer service dept. at 1-877-258-6020
When assembling components, place on a clean, flat
non-abrasive surface to avoid scratches
…
Battery or Electric Drill with #2 phillips bit
…File
…
Hammer or Rubber Mallet (recommended)
150 Birch Road
P.O. Box 122
Sheboygan Falls, WI 53085
www.dura-trel.com
[e-mail]
Tools Required
1-877-258-6020
1
3
General Information
2
1
2
2
1
1
4
14
2
2
1
2
Qty
1
Greenfield Potting Bench
2
1
4
12
48
1

150 Birch Road
P.O. Box 122
Sheboygan Falls, WI 53085
1-877-258-6020
2
www.dura-trel.com
[e-mail]
Please call manufacturer direct with questions concerning missing or defective parts at Toll Free: 877-
258
-6020.
Dura
-trel, Inc. products are warranted to be free from manufacturing defects resulting in delaminating,
peeling, flaking, corroding, cracking, crazing, or extreme amounts of fading or bleaching causing the PVC
to change to its natural color for a period of 20 years from the date of purchase.
Normal weathering is defined as exposure to sunlight and extremes of weather and atmosphere which
will cause any colored surface to gradually fade.
CONDITIONS NOT COVERED BY THIS WARRANTY:
A. Physical abuse, misuse, neglect, or improper storage.
B. Improper installation or installation not in strict adherence to the instructions written by Dura
-Trel,
Inc.
C. This warranty does not apply if materials are painted, varnished, or coated with any substance.
D. Dura
-Trel, Inc. is not responsible for damages to product during shipping.
E. Damage attributable to atmospheric pollutants, hail, lightning, hurricane, tornado, wind borne objects,
earthquake, fire, mildew, casualty, act of God, building or ground settlement, or subjection to stress or
weight.
CLAIMS AND REMEDIES:
If a Dura
-Trel, Inc. product is determined to have a manufacturing defect which is covered by this
warranty, Dura
-Trel, Inc. will replace the material containing the defect (labor not included) F.O.B from
the point of manufacture. Dura
-trel, Inc. will not be responsible for any cost incurred in the removal or
reinstallation of the product.
Important:
An claims must be sent to the following address and should describe the defect claim.
Dura-Trel, Inc., P.O. Box 122, Sheboygan Falls, WI 53085
Dura
-Trel, Inc. reserves the right to discontinue or change its design, and or color. If the original color or
style is not available, Dura
-Trel, Inc. shall have the right to substitute a product designated by Dura-Trel,
Inc.
Dura
-Trel, Inc. shall not be liable for any incidental, special, or consequential damages arising out of the
use of these products
Warranty Statement
20 Year Guarantee

3
Greenfield Potting Bench
Insert ⅞" x 3” x 46½” back rail (part 8) into
top hole in back right post (part 2). Insert
1½" x 5½" x 46½” back rail (part 9) into top
of large hole of back right post. Insert one
table support (part 4), into bottom of
large hole of back right post. Insert one
shelf support (part 5) into bottom hole of
right back post. Insert free ends of all rails
into corresponding holes of back left post
(part 1).
Flip over potting bench back panel,
keeping parts inserted into posts. Using
six ¾" screws per post, screw together
potting bench back panel. Be sure that all
parts are fully inserted into posts before
securing.
Insert one table support (part 4), into top
hole of one front post (part 1). Insert one
shelf support (part 5) into bottom hole of
same front post. Insert free ends of table
and shelf support into corresponding
holes of second front post (part 1).
Flip over potting bench front panel,
keeping parts inserted into posts. Using
four ¾" screws per post, screw together
potting bench front panel. Be sure that all
parts are fully inserted into posts before
securing.
1
2
3
4

Greenfield Potting Bench
4
Insert three ⅞" x 3” x 20¼” table/shelf rails
(part 7) into table support of back panel.
Insert eleven ⅞" x 3” x 20¼” table/shelf rails
(part 7) into shelf support of back panel.
Insert two 1½" x 4" x 20¼” side rails (part 6)
into back right and back left post. Insert free
ends of all rails into corresponding holes of
front panel.
Using four ¾" screws per post, screw
together potting bench. Be sure that all parts
are fully inserted into posts before securing.
Lay out three ½" x 5½" x 43” table top rails
(part 12). Using six 1¼” screws per piece,
insert screws through two ⅞" x 1½" x 16½"
table brace (part 13). Fasten screws to screw
pilot holes of the three table top rails. Using
super glue tube, apply glue to inner edges of
16½" table top end cap (part 14). Slide end
cap onto ends of table top. Using a file or
sandpaper, file sharp corners of end cap.
5
6
7

Greenfield Potting Bench
5
From behind, slide shelf through gap in
back panel of potting bench. Using six ¾"
screws, fasten wide end of brackets to
1½" x 5½" x 46½" back rail.
Lay out the 1½" x 5½" x 42½" shelf rail and
two 10¾" shelf suppport brackets. Using a
tape measure, mark shelf rail 6" in from
each end. Using three ¾" screws per
bracket, fasten narrow end of each bracket
to shelf rail 6" from end of shelf rail. Shelf
rail should sit on part of bracket without
screw holes. Apply glue to inner edges of
5½" shelf end cap (part 15). Slide end cap
onto ends of shelf rail.
8
9
Apply PVC glue to inner edges of four 2” sq.
post caps and place on top of each post.
Set table top assembly into working area of
potting bench. The table top is designed to
be removed for easy and quick cleaning.
10