Edwards D-397-54-000 User manual

D397-54-880
Issue A Original
Instruction Manual
TIC and Scientific Profibus Module
Description Item
Number Description Item Number
TIC Profibus Module D397-54-000 Scientific Profibus Module D397-55-000
Original Instructions

This product has been manufactured under a quality management system certified to ISO 9001:2008
Declaration of Conformity
We, Edwards,
Innovation Drive,
Burgess Hill,
West Sussex,
RH15 9TW, UK
declare under our sole responsibility, as manufacturer and person within the EU authorised
to assemble the technical file, that the product(s)
TIC Profibus Module D397-54-000
Scientific Profibus Module D397-55-000
to which this declaration relates is in conformity with the following standard(s) or other
normative document(s)
EN61326-1:2013 Electrical equipment for measurement, control and laboratory
(Class B Emissions, Use. EMC requirements. General requirements
Industrial Immunity)
and fulfils all the relevant provisions of
2014/30/EU Electromagnetic Compatibility (EMC) Directive
2012/19/EU Waste from Electrical and Electronic Equipment (WEEE) Directive
2011/65/EU Restriction of Certain Hazardous Substances (RoHS) Directive
Note: This declaration covers all product serial numbers from the date this Declaration was
signed onwards.
06.07.2017, Eastbourne
Larry Marini, Senior Technical Manager Date and Place
P200-03-180 Issue F

P200-10-088
Issue B
Material Declaration
In accordance with the requirements of the Chinese regulatory requirement on the Management Methods for the
Restriction of the Use of Hazardous Substances in Electrical and Electronic Products Order No. 32 (also known as
‘China RoHS2’) and SJ/T 11364 Marking for the Restricted Use of Hazardous Substances in Electronic and Electrical
Products:
Product Product Label Meaning
D39754000 TIC Profibus Module
D39755000 Scientific Profibus Module
This product contains hazardous substances in at
least one of the homogeneous materials used
which are above the limit requirement in GB/T
26572 as detailed in the declaration table below.
These parts can safely be used for the
environmental protection use period as
indicated.
材料成分声明
Materials Content Declaration
部件名称
Part name
有害物质
Hazardous Substances
铅
Lead
(Pb)
汞
Mercury
(Hg)
镉
Cadmium
(Cd)
六价铬
Hexavalent
Chromium
(Cr VI)
多溴联苯
Polybrominated
biphenyls (PBB)
多溴二苯醚
Polybrominated
diphenyl ethers
(PBDE)
印刷电路组件 (PCA)
Printed Circuit
Assembly (PCA)
X O X O O O
电缆/电线/连接器
Cable/wire/connector
X O O O O O
机械部件
Mechanical Components
X O O O O O
O: 表示该有害物质在该部件的所有均质材料中的含量低于 GB/T 26572 标准规定的限量要求。
O: Indicates that the hazardous substance contained in all of the homogeneous materials for this part is
below the limit requirement in GB/T 26572.
X: 表示该有害物质在该部件的至少一种均质材料中的含量超出 GB/T26572 标准规定的限量要求。
X: Indicates that the hazardous substance contained in at least one of the homogeneous materials used for
this part is above the limit requirement of GB/T26572.
NOTE: These products are EU RoHS compliant, the following Exemptions apply:
6(b)
Lead
as an alloying element in aluminium containing up to 0.4% by weight
6(c) Copper alloy containing up to 4%
lead
by weight
7(a)
Lead
in in high melting temperature type solder (i.e. lead based alloys containing 85% by or more)
7(b)
Lead
in solders for servers, storage and storage array systems, network infrastructure equipment for switching, signalling,
transmission, and network management for telecommunications
7(c) I Electrical and electronic components containing
lead
in a glass or ceramic other than dielectric ceramic in capacitors, e.g.
piezoelectronic devices, or in a glass or ceramic matrix compound
7(c) II
Lead
in dielectric ceramic in capacitors for a rated voltage of 125 V AC or 250 V DC or higher
8(b)
Cadmium
and its compounds in electrical contacts
15
Lead
in solders to complete a viable electrical connection between semiconductor die and carrier within integrated circuit flip
chip packages
34
Lead
in cermet-based trimmer potentiometer elements

This page has been intentionally left blank.

© Edwards Limited 2017. All rights reserved. Page i
Edwards and the Edwards logo are trademarks of Edwards Limited.
Contents
D397-54-880 Issue B
Contents
Section Page
1 Introduction ....................................................................................... 1
1.1 Scope and definitions ................................................................................................... 1
1.2 Product description ...................................................................................................... 2
2 Technical data .................................................................................... 3
2.1 Electrical data ............................................................................................................ 3
2.2 Operating and storage data ............................................................................................ 4
2.3 Mechanical data .......................................................................................................... 4
2.4 Connections ............................................................................................................... 4
2.4.1 Profibus connector ...................................................................................................... 4
2.4.2 D.C. Power connector ................................................................................................... 5
2.4.3 RS232 Connector (TIC Version only) .................................................................................. 5
2.4.4 DX/nEXT/nXDS Pump Connector (Scientific version only) ......................................................... 6
2.4.5 Front panel USB connector ............................................................................................. 7
3 Installation ........................................................................................ 9
3.1 Unpack and inspect ...................................................................................................... 9
3.2 Fitting the Module ....................................................................................................... 9
3.2.1 Rack mounting ..........................................................................................................10
3.2.2 Panel mounting .........................................................................................................11
3.2.3 DIN rail mounting .......................................................................................................11
3.3 Electrical connections ..................................................................................................12
3.3.1 TIC Profibus module rear connections ...............................................................................12
3.3.2 Scientific Profibus module rear connections .......................................................................12
3.4 Bus termination .........................................................................................................12
4 Operation ........................................................................................ 13
4.1 Profibus system information ..........................................................................................13
4.2 Start up sequence ......................................................................................................13
4.2.1 Simple set up instructions for the TIC version .....................................................................14
4.2.2 Simple set up instructions for the Scientific version ..............................................................14
4.3 Front panel display .....................................................................................................15
4.4 Address set-up ...........................................................................................................16
4.5 Baud-rate ................................................................................................................18
4.6 Software format ........................................................................................................18
4.6.1 Parameterisation ........................................................................................................18
4.6.2 Configuration ............................................................................................................ 19
4.6.3 Configuration failure ...................................................................................................19
4.6.4 Parameterisation failure ...............................................................................................19
4.6.5 Diagnostics description ................................................................................................20
4.7 Details of DX/nEXT/nXDS pump software modules ................................................................20
4.7.1 Software module 802 - nXDS Pump Control .........................................................................21
4.7.2 Software module 803 - nXDS Pump Speed Demand ................................................................21
4.7.3 Software module 808 - nXDS Pump Temperatures .................................................................22
4.7.4 Software module 809 - nXDS Pump Power ..........................................................................22
4.7.5 Software module 810 - nXDS Pump Run Time ......................................................................22
4.7.6 Software module 811 - nXDS Pump Cycles ..........................................................................23
4.7.7 Software module 813 - nXDS Drive Run Time .......................................................................23
4.7.8 Software module 814 - nXDS Tip Seal Run Time ...................................................................23
4.7.9 Software module 815 - nXDS Bearing Run Time ....................................................................24
4.7.10 Software module 852 - DX/nEXT Pump Control ....................................................................24
gea/042/01/11

D397-54-880 Issue B
Page ii © Edwards Limited 2017. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Contents
4.7.11 Software module 853 - DX/nEXT Pump Set-up .....................................................................25
4.7.12 Software module 859 - DX/nEXT Pump Temperatures ............................................................26
4.7.13 Software module 860 - DX/nEXT Pump Power .....................................................................26
4.7.14 Software module 864 - nEXT85 Pump Vent Option 2 ..............................................................26
4.7.15 Software module 865 - nEXT85 Only Pump Temperatures ....................................................... 27
4.7.16 Software module 869 - DX/nEXT Pump Speed Demand ...........................................................27
4.7.17 Software module 875 - DX/nEXT Vent Valve close ................................................................27
4.7.18 Software module 880 - nEXT Service Set-up ........................................................................28
4.7.19 Software module 881 - nEXT Service Status ........................................................................28
4.7.20 Software module 882 - nEXT Controller Run Time ................................................................29
4.7.21 Software module 883 - nEXT Pump Run Time ......................................................................29
4.7.22 Software module 884 - nEXT Pump Cycles ..........................................................................29
4.7.23 Software module 885 - nEXT Bearing Run Time ....................................................................30
4.7.24 Software module 886 - nEXT Oil Cartridge Run Time .............................................................30
4.7.25 Software module 902 - Scientific Profibus module Software Version ...........................................30
4.8 Details of TIC Software modules .....................................................................................31
4.8.1 Front panel lock .........................................................................................................33
4.8.2 Software module 853 - DX/nEXT Pump Set-up .....................................................................33
4.8.3 Software module 859 - DX/nEXT Pump Temperatures ............................................................34
4.8.4 Software module 860 - DX/nEXT Pump Power .....................................................................34
4.8.5 Software module 864 - nEXT85 Pump Vent Option 2 ..............................................................35
4.8.6 Software module 865 - nEXT85 Only Pump Temperatures .......................................................35
4.8.7 Software module 869 - DX/nEXT Pump Speed Set-up .............................................................35
4.8.8 Software module 875 - DX/nEXT Vent Valve close ................................................................36
4.8.9 Software module 880 - nEXT Service Set-up ........................................................................36
4.8.10 Software module 881 - nEXT Service Status ........................................................................37
4.8.11 Software module 882 - nEXT Controller Run Time ................................................................37
4.8.12 Software module 883 - nEXT Pump Run Time ......................................................................38
4.8.13 Software module 884 - nEXT Pump Cycles ..........................................................................38
4.8.14 Software module 885 - nEXT Bearing Run Time ....................................................................38
4.8.15 Software module 886 - nEXT Oil Cartridge Run Time .............................................................39
4.8.16 Software module 803 - nXDS Pump Speed Demand ................................................................39
4.8.17 Software module 808 - nXDS Pump Temperatures .................................................................39
4.8.18 Software module 809 - nXDS Pump Power ..........................................................................40
4.8.19 Software module 810 - nXDS Pump Run Time ......................................................................40
4.8.20 Software module 811 - nXDS Pump Cycles ..........................................................................40
4.8.21 Software module 813 - nXDS Drive Run Time .......................................................................40
4.8.22 Software module 814 - nXDS Tip Seal Run Time ...................................................................41
4.8.23 Software module 815 - nXDS Bearing Run Time .................................................................... 41
4.8.24 Software module 902 - TIC Software Version .......................................................................41
4.8.25 Software module 904 - Turbo Pump control ........................................................................42
4.8.26 Software module 905 - Turbo Pump Speed .........................................................................43
4.8.27 Software module 906 - Turbo Pump Power ......................................................................... 43
4.8.28 Software module 907 - Turbo Normal ...............................................................................44
4.8.29 Software module 908 - Turbo Standby ..............................................................................44
4.8.30 Software module 909 - Turbo Cycle Time ...........................................................................44
4.8.31 Software module 910 - Backing pump control ......................................................................45
4.8.32 Software module 911 - Backing pump speed .......................................................................45
4.8.33 Software module 912 - Backing pump power .......................................................................46
4.8.34 Linking gauges and pumps .............................................................................................46
4.8.35 Software module 913 - Gauge 1 ......................................................................................47
4.8.36 Software module 914 - Gauge 2 ......................................................................................48
4.8.37 Software module 915 - Gauge 3 ......................................................................................48
4.8.38 Linking Relay set point outputs .......................................................................................48
4.8.39 Software module 916 - Relay 1 .......................................................................................49
4.8.40 Software module 917 - Relay 2 .......................................................................................49
4.8.41 Software module 918 - Relay 3 .......................................................................................49
4.8.42 Software module 919 - TIC Power supply temperature ........................................................... 50
4.8.43 Software module 920 - TIC internal temperature .................................................................50
4.8.44 Software module 921 - Analogue output ............................................................................51

© Edwards Limited 2017. All rights reserved. Page iii
Edwards and the Edwards logo are trademarks of Edwards Limited.
Contents
D397-54-880 Issue B
4.8.45 Software module 922 - TIC Vent valve ..............................................................................51
4.8.46 Software module 923 - Heater band .................................................................................52
4.8.47 Software module 924 - Air Cooler (Fan) .............................................................................52
4.8.48 Software module 933 - System .......................................................................................53
4.8.49 Software module 934 - Gauge 4 ......................................................................................53
4.8.50 Software module 935 - Gauge 5 ......................................................................................54
4.8.51 Software module 936 - Gauge 6 ......................................................................................55
4.8.52 Software module 937 - Relay 4 .......................................................................................55
4.8.53 Software module 938 - Relay 5 .......................................................................................55
4.8.54 Software module 939 - Relay 6 .......................................................................................55
4.9 Response time calculations & Measurements ......................................................................55
5 Maintenance ..................................................................................... 57
5.1 Fault finding ............................................................................................................. 57
5.2 Factory defaults .........................................................................................................58
5.3 Fuse replacement (Scientific version only) .........................................................................63
6 Storage and Disposal ........................................................................... 65
6.1 Storage ...................................................................................................................65
6.2 Disposal ................................................................................................................... 65
7 Spares and Accessories ........................................................................ 67
7.1 Introduction .............................................................................................................67
7.2 Spares ..................................................................................................................... 67
7.3 Accessories ...............................................................................................................67
Appendix A1 TIC Full Pump States .................................................................... 69
Appendix A2 Alert ID .................................................................................... 70
Appendix A3 Priority .................................................................................... 71
Appendix A4 Command List ............................................................................ 72
Appendix A5 Active Gauge States ..................................................................... 73
For return of equipment, complete the HS Forms at the end of this manual.
Illustrations
Figure Page
1 Pin connections for 9-way sub-miniature ‘D’ type socket ......................................................... 4
2 Pin connections for the 2-way Power Connector ................................................................... 5
3 Pin connections for 9-way sub-miniature ‘D’ type plug ........................................................... 6
4 Pin connections for 15-way sub-miniature ‘D’ type socket ....................................................... 7
5 Dimensions of the Profibus module (mm) ............................................................................ 9
6 Rack mounting the Module ............................................................................................10
7 Panel mounting the Module ...........................................................................................11
8 DIN rail mounting the Module .........................................................................................11
9 TIC Profibus module rear connections ...............................................................................12
10 Scientific Profibus module rear connections .......................................................................12
11 Profibus front panel display ...........................................................................................15

D397-54-880 Issue B
Page iv © Edwards Limited 2017. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Contents
Tables
Table Page
1 Electrical data ............................................................................................................ 3
2 Operating and storage data ............................................................................................ 4
3 Mechanical data .......................................................................................................... 4
4 Profibus connector ...................................................................................................... 4
5 Pin connections for 9-way sub-miniature ‘D’ type socket ......................................................... 5
6 D.C. power connector ................................................................................................... 5
7 RS232 connector (TIC version only) ................................................................................... 5
8 Pin connections for 9-way sub-miniature ‘D’ type plug ........................................................... 6
9 DX/nEXT/nXDS pump connector (Scientific version only) ......................................................... 6
10 Pin connections for 15-way sub-miniature ‘D’ type socket ....................................................... 7
11 Front panel USB connector ............................................................................................. 7
12 Component checklist .................................................................................................... 9
13 Front panel symbols and their functions ............................................................................15
14 Address switch settings ................................................................................................16
15 DX/nEXT/nXDS pump module summary ............................................................................. 20
16 DX/nEXT status flags ...................................................................................................25
17 Converting the value to binary .......................................................................................28
18 TIC Controller Module summary ......................................................................................31
19 Converting the value to binary .......................................................................................37
20 Fault finding guide ......................................................................................................57
21 Profibus Module default set-up values (Scientific version) .......................................................58
22 Profibus Module default set-up values (TIC version) ..............................................................58

© Edwards Limited 2017. All rights reserved. Page 1
Edwards and the Edwards logo are trademarks of Edwards Limited.
Introduction
D397-54-880 Issue B
1Introduction
1.1 Scope and definitions
This manual provides installation, operation and maintenance instructions for the Edwards Turbo Instrument
Controller (TIC) Profibus Module and the Edwards Scientific Profibus Module. You must use the Controller as specified
in this manual.
Read this manual before you install and operate your Controller. Important safety information is highlighted as
WARNING and CAUTION instructions; you must obey these instructions. The use of WARNINGS and CAUTIONS is defined
below.
CAUTION
Cautions are given where failure to observe the instruction could result in damage to the equipment, associated
equipment and process.
Throughout this manual, page, figure or title numbers are sequential.
The following labels appear on the Controller:
The units used throughout this manual conform to the SI international system of units of measurement.
WARNING
Warnings are given where failure to observe the instruction could result in injury or death to
people.
Warning - refer to accompanying documentation.
Edwards offer European customers a recycling service.

D397-54-880 Issue B
Page 2 © Edwards Limited 2017. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Introduction
1.2 Product description
There are two variants of the Profibus Module, both of which are provided with a standard Profibus connection, DC
power input connection and connection to the Edwards equipment. The TIC Profibus Module is provided with a short
serial cable to connect the module to the TIC serial comms port. The Scientific Profibus Module is provided with a
15 way connector. The 15 way flying lead or extension cable attached to the DX/nEXT/nXDS pump can be directly
connected for both power and control.
This manual explains how to control and monitor the TIC and Scientific modules with a Profibus system. Please refer
to the following manuals for operation of TIC controllers and DX/nEXT/nXDS pumps:
D397-01-880 TIC Instrument Controller - 6 Gauge
D397-12-880 Turbo Controller
D397-21-880 Instrument Controller
D397-22-880 Turbo Instrument controller
D397-30-880 TIC serial comms manual
B722-40-880 DX Pumps
B800-00-880 nEXT Pumps
B8G0-00-880 nEXT85 Pump
A735-01-880 nXDS Scroll Pump
A735-01-860 nXDS Serial Comms Interface
WARNING
Improper use of the equipment may impair the protection provided and could cause damage to it.
WARNING
The equipment is used to remotely control other equipment that could be hazardous if used
inappropriately. The responsibility for the safe operation and maintenance of the equipment
being controlled is with the user.
WARNING
The data received from this unit should not be used for safety purposes.

© Edwards Limited 2017. All rights reserved. Page 3
Edwards and the Edwards logo are trademarks of Edwards Limited.
Technical data
D397-54-880 Issue B
2Technicaldata
2.1 Electrical data
* nXDS does not require an electrical supply on the Profibus Module.
Table 1 - Electrical data
Power connector type 2 Way cable-mount Terminal Block (supplied)
Suitable parts include: Phoenix MSTB 2.5/2-ST-5.08;
Weidmuller BLZ 5.08/2; Amp 796634-2; IMO 21.950/2
Electrical supply
TIC Profibus Module
Scientific Profibus Module for
EXT75DX, EXT255DX, nEXT85, 240, 300, 400 *
9 V d.c. min to 52 V d.c. max
21.6 V d.c. min to 25.2 V d.c. max
Power consumption 5W maximum
Switch on surge 500 mA max.
Note: Scientific Profibus Modules also supply power to
the pump. Additional supply requirement: 6 A
for EXT75DX, 10 A for EXT255DX and nEXT.
Refer to manuals for other DX/nEXT Turbo
Pumps.*
Fuse
TIC Profibus Module
Scientific Profibus Module
No internal fuse
Fitted with 10 A internal fuse. Suitable fuses available
from Edwards (Part No. D39751830).
WARNING
(Scientific version only)
Incorporate a suitable isolation device in the electrical supply. Locate the switch in an easily
accessible position and mark it as the disconnecting device for the DX/nEXT pump. If you do not,
you will not be able to switch off the DX/nEXT pump in an emergency.
WARNING
Do not exceed the maximum supply voltage. Excessive supply voltage will cause permanent
damage to the control electronics and may result in a mechanical hazard in some failure
conditions.
Profibus cable Should be screened and comply with EN50170
RS232 cable (TIC version only) 25 m max. Screening not required.
DX/nEXT/nXDS pump cable (Scientific pump version
only)
Use (1 m) cable supplied with DX/nEXT pump only or
Edwards DX/nEXT/nXDS pump extension cables.

D397-54-880 Issue B
Page 4 © Edwards Limited 2017. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Technical data
2.2 Operating and storage data
Table 2 - Operating and storage data
2.3 Mechanical data
Table 3 - Mechanical data
2.4 Connections
2.4.1 Profibus connector
Table 4 - Profibus connector
Figure 1 - Pin connections for 9-way sub-miniature ‘D’ type socket
Ambient operating temperature range 0 °C to 40 °C
Ambient storage temperature range -30 °C to 70 °C
Maximum ambient operating humidity Max 90% RH non condensing
Maximum operating altitude 2000 m max
IP rating IP30 - indoor use only
Weight 0.28 kg
Dimensions See Section 3.2
Connector type 9-way sub-miniature ‘D’ type socket (refer to Figure 1)
Profibus Data signals Electrically compliant with RS485 specification.
Isolated from chassis.
Profibus Power Supply 10 ma supply (protected) for external terminator
resistors if required.
Chassis For Profibus cable screen connection
Repeater control sign Digital signal, nominally 0-5 V but with series 340 ohm
resistor. High = module transmitting. Low = Receiving
or Idle.

© Edwards Limited 2017. All rights reserved. Page 5
Edwards and the Edwards logo are trademarks of Edwards Limited.
Technical data
D397-54-880 Issue B
Table 5 - Pin connections for 9-way sub-miniature ‘D’ type socket
2.4.2 D.C. Power connector
Table 6 - D.C. power connector
Figure 2 - Pin connections for the 2-way Power Connector
2.4.3 RS232 Connector (TIC Version only)
Table 7 - RS232 connector (TIC version only)
Pin Allocation
1 Chassis (box)
2 Not connected
3ProfibusData+(B)
4 Control Signal for Repeater
5 Profibus Data reference (Isolated)
6 Profibus 5 V output (Isolated)
7 Not connected
8 Profibus Data - (A)
9 Not connected
Shell Chassis (box)
Connector type 2 Way Receptacle. Mating part is cable-mount Terminal
Block (supplied).
Suitable parts include: Phoenix MSTBV 2.5/2-G-5.08;
Weidmuller BLZ 5.08/2; Amp 796634-2; IMO 21.950/2
(Refer to Figure 2).
Requirements See Section 2.1
Connector type 9-way sub-miniature ’D’ type Plug (refer to Figure 3)
For connection to serial comms port of Turbo Instrument
Controller only.
RS232 protocol 9600 baud, 1 stop bit, 8 data bits, no parity

D397-54-880 Issue B
Page 6 © Edwards Limited 2017. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Technical data
Figure 3 - Pin connections for 9-way sub-miniature ‘D’ type plug
Table 8 - Pin connections for 9-way sub-miniature ‘D’ type plug
2.4.4 DX/nEXT/nXDS Pump Connector (Scientific version only)
Table 9 - DX/nEXT/nXDS pump connector (Scientific version only)
CAUTION
When connecting the DX/nEXT/nXDS pump to the power supply, ensure that all 3 pins for the 24 V connection
and all 3 pins for the 0 V connection on your connector mating half are connected to the power supply.
Pin Allocation
1 Not connected
2RS232receive
3RS232transmit
4 Not connected
5 RS232 common
6 Not connected
7 Not connected
8 Not connected
9 Not connected
Shell Chassis (box)
Connector type 15-way sub-miniature ‘D’ type Socket (refer to Figure 4)
Cable type Connection must be either direct to the DX/nEXT pump
flying lead or an Edwards DX/nEXT/nXDS pump
extension cable. Refer to the specification in the DX
pump manual B722-40-880, nEXT pump manual B800-00-
880, nEXT85 pump manual B8G0-00-880 and nXDS pump
manual A735-01-880 for further information.
Power connections Refer to caution below
RS232 protocol 9600 baud, 1 stop bit, 8 data bits, no parity.

© Edwards Limited 2017. All rights reserved. Page 7
Edwards and the Edwards logo are trademarks of Edwards Limited.
Technical data
D397-54-880 Issue B
Figure 4 - Pin connections for 15-way sub-miniature ‘D’ type socket
Table 10 - Pin connections for 15-way sub-miniature ‘D’ type socket
2.4.5 Front panel USB connector
Pin Allocation
1+24Vd.c.poweroutput(Connect all three 24 V pins)
2 Not connected
3 Not connected
4RS232Transmit
5 Serial enable link (Resistor to 0 V)
6+24Vd.c.poweroutput
7RS232Receive
80Vpower(Connect all three 0 V pins)
9+24Vd.c.poweroutput(Connect all three 24 V pins)
10 Chassis (box)
11 +24 V d.c. power output (Connect all three 24 V pins)
12 Not connected
13 0 V power (Connect all three 0 V pins)
14 0 V power (Connect all three 0 V pins)
15 Not connected
Shell Chassis (box)
Table 11 - Front panel USB connector
Connector type USB Micro-B socket
Function Software upgrade by Edwards service personnel only

D397-54-880 Issue B
Page 8 © Edwards Limited 2017. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
This page has been intentionally left blank.

© Edwards Limited 2017. All rights reserved. Page 9
Edwards and the Edwards logo are trademarks of Edwards Limited.
Installation
D397-54-880 Issue B
3Installation
3.1 Unpack and inspect
Remove all of the packaging material and check the Module. If the Module is damaged, follow the Edwards return of
equipment procedures that are laid out in the back of this manual. Do not use the Module if it is damaged.
Check that your package contains the items that are listed in Table 12. If any of these items are missing, notify your
supplier in writing within three days. If the Module is not to be used immediately, store the Module in suitable
conditions as described in Section 6.1.
Table 12 - Component checklist
3.2 Fitting the Module
The Module can be fitted in a rack or DIN-rail mounted. If either of these methods are not used, the module should
be laid with one of it's largest faces down, to ensure stability. Figure 5 shows the dimensions of the Profibus module.
Figure 5 - Dimensions of the Profibus module (mm)
Quantity Description Check ( )
1Module
1 Quick Guide and Health and Safety Information
1 Profibus Module CD (includes main manual, GSD files)
1 DC Power Connector
2 DIN Rail clips
2 Mounting screws
1 Serial cable (TIC version only)
1 Spare Fuse (Scientific version only)
4Rubberfeet
WARNING
If access to the DC power connector is restricted an additional isolation device should be provided
which will be easily accessible by an operator.


D397-54-880 Issue B
Page 10 © Edwards Limited 2017. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Installation
Sufficient space must be provided at the rear of the unit for the cables. For this reason it is suggested that the
customer uses a straight Profibus connection. If a right-angled connection is to be used space will be required above
the height on the module.
CAUTION
Do not "Hot-swap" the DX/nEXT pump connection. Power must be removed before connecting or disconnecting
a turbo pump.
CAUTION
The unit is IP30 rated. Please ensure that the unit is not installed where fluids can enter into the Controller.
3.2.1 Rack mounting
For Rack mounting the unit should fit in a 6HP wide, 3U High space using the 2-off M2.5 screws provided, as shown
in Figure 6.
Figure 6 - Rack mounting the Module
WARNING
Ensure that all electrical wiring is safely secured so that people cannot trip on them.

© Edwards Limited 2017. All rights reserved. Page 11
Edwards and the Edwards logo are trademarks of Edwards Limited.
Installation
D397-54-880 Issue B
3.2.2 Panel mounting
For panel mounting cut the aperture in the panel using the dimensions shown in Figure 7. The module can be fixed
into the panel with the 2-off M2.5 screws.
Figure 7 - Panel mounting the Module
3.2.3 DIN rail mounting
For DIN rail mounting the 2 clips should be attached to the module using 2-off M3 screws provided (one in the centre
of each clip), as shown in Figure 8. The clips should then be roughly aligned with the box sides. The clips can then
be fitted to a suitable DIN-rail, as shown in Figure 8.
It is recommended to use end stops on a DIN rail system.
Figure 8 - DIN rail mounting the Module

D397-54-880 Issue B
Page 12 © Edwards Limited 2017. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Installation
3.3 Electrical connections
Fit the electrical connections as specified in Section 2.
3.3.1 TIC Profibus module rear connections
Figure 9 - TIC Profibus module rear connections
3.3.2 Scientific Profibus module rear connections
Figure 10 - Scientific Profibus module rear connections
3.4 Bus termination
Bus-termination is not supplied with the module, but must be used as for a normal Profibus DP system. Bus
termination must be used at both ends of the Profibus trunk and not anywhere else. If the module is placed at one
end of the trunk a connector containing the standard termination resistors should be used. The appropriate 5 V and
0 V signals are supplied on the standard pins for this purpose.