Enabling Devices Mickey Bubble Blower 2332 User manual

For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
-800-832-8697
[e-mail]
Mickey Bubble Blower #2332
USER’S GU DE
50 Broadway
Hawthorne, NY 0532
Tel. [phone] / Fax [phone]
Toll Free 800.832.8697
www.enablingdevices.com

Mickey’s playing his guitar—or is he? Activate him with a touch or
with a capability switch (not included) and bubbles stream from his
guitar! Mickey comes with oz. of non-toxic, dye-free bubble juice to
get his performance started. Size: "L x 5"W x 9"H. Requires 3 AAA
batteries. Weight: ½ lb. Note: Does not play music.
Operation:
. Mickey Bubble Blower requires 3 AAA batteries (Not included)
to operate. Use alkaline batteries only (e.g. Duracell or
Energizer brand). Do not use rechargeable batteries or any
other type of batteries because they supply lower voltage and
the unit will not perform properly. Never mix old and new
batteries together or different brands or types together.
2. The battery compartment is located in the back of Micky’s
head. Carefully turn Mickey over to reveal the battery
compartment cover. Using a Phillips head screwdriver
unscrew the cover screws and install 3 AAA batteries, paying
close attention to proper (+) and (-) battery polarity.
3. Replace the battery compartment cover and secure with the
screws. Connect to any external capability switch (not
included) via the jack located on the side of Mickey. Mickey
Bubble Blower is equipped with a /8″ jack for use with
external capability switches with a /8″ plug. Make sure you
have your switch plugged in all the way. There should be no
gaps.
4. The Bubble solution container is the bottom part of Mickey.
Just unscrew the bottom of Mickey and fill with bubble
solution. Follow the original manufactures instructions for
installing.
5. Mickey Bubble Blower can be used with or without an external
switch. The ON/OFF switch is Mickey’s mouse symbol on his
back. When using an external capability switch, the ON/OFF
switch needs to be set in the OFF position. Actuate your
external capability switch and the bubbles will start to flow!
Once you release your switch the bubbles will stop.
5. When finished playing with Mickey Bubble Blower turn him
OFF to prevent battery drain.
Troubleshooting:
Problem: Mickey Bubble Blower does not function correctly.
Action #1: Check that all the batteries are installed, following
proper (+) & (-) polarity. Also check that all batteries are fresh.
Action #2: Replace the batteries paying close attention to proper
(+) and (-) battery polarity.
Action # 3: Make sure you have enough Bubble solution in the
bubble solution tank.
Action #4: Make sure that your switch is plugged into the jack all
the way. There should be NO gaps.
Action #5: Try your switch with another switch operated
toy/device in an effort to rule out your switch as the source of the
problems.
Care of Unit:
If you will not be using Mickey Bubble Blower for an extended
amount of time, we recommend removing the batteries.
Mickey Bubble Blower can be wiped clean with any household
multi-purpose cleaner and disinfectant. We recommend Simple
Green, which is a non toxic biodegradable all-purpose cleaner.
Do not submerge the unit, as it will damage the contents and the
electrical components.
Do not use abrasive cleaners, as they will scratch the surface
of the unit.
Rev 3/26/2021