Enabling Devices Pretty Kitten 904 User manual

For Technical Support:
For Technical Support:For Technical Support:
For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST
1-800-832-8697
[e-mail]
Pretty Kitten #904
USER’S GUIDE
50 Broadway
Hawthorne, NY 10532
Tel. [phone] / Fax [phone]
Toll Free 800.832.8697
www.enablingdevices.com

Pretty Kitten
Pretty KittenPretty Kitten
Pretty Kitten
Welcome to Our World of Plush Toys! Watch them walk,
talk and make animal sounds. Cute and cuddly, these
plush toys will provide you with hours of excitement!
Accepts 1/8” plugs. Color may vary due to manufacturer’s
availability. Requires 2 AA Batteries. Weight: ¾ lb.
Operation:
Operation:Operation:
Operation:
1. Pretty Kitten requires 3 AA batteries (Not included to
operate. Alkaline batteries are recommended
because they last longer. Do not use rechargeable
batteries because they supply a lower voltage and the
unit may not perform as well.
2. Turn Pretty Kitten upside down to reveal the battery
compartment. Install 3 AA batteries paying close
attention to proper battery polarity.
3. Replace the battery compartment cover and secure it.
4. Connect Pretty Kitten to any external capability switch
(not included via the jack located at the end of the
kitten’s cord. Pretty Kitten is equipped with a 1/8”
jack for use with external capability switches with a
1/8” plug. Make sure to make a tight connection.
There should be no gaps.
5. Actuate your external capability switch and the Pretty
Kitten will spring to life!
6. Pretty Kitten will walk, wag her tail and cry. If you pick
her up, she will stop and make a cute “Mew Mew”
sound.
7. Pretty Kitten will remain on while the external
capability switch continues to be actuated. Once you
release the external capability switch, there will be a
brief delay, and then Pretty Kitten will turn off.
Troubleshooting:
Troubleshooting:Troubleshooting:
Troubleshooting:
Problem:
Problem: Problem:
Problem: Pretty Kitten does not function correctly.
Action #1:
Action #1: Action #1:
Action #1: Replace the batteries paying close attention
to proper battery polarity.
Action #2:
Action #2:Action #2:
Action #2: Make sure that the connection between the
external capability switch and the jack is TIGHT. There
should be NO gaps.
Action #3:
Action #3: Action #3:
Action #3: Try your switch with another switch operated
toy/device in an effort to rule out your switch as the
source of the problems.
Note:
Note:Note:
Note:
Small children should be supervised when playing with
this toy, as there are some small parts, which could be a
choking hazard.
Care of Unit:
Care of Unit:Care of Unit:
Care of Unit:
• Do not inhibit Pretty Kitten’s movement, as this may
cause irreversible damage.
• Do not lift Pretty Kitten up by her tail, head or legs, or
drop Pretty Kitten.
• If you will not be using Pretty Kitten for an extended
amount of time, we recommend removing the
batteries.
Do not submerge
Do not submergeDo not submerge
Do not submerge the unit in water, as it will damage the
electrical components.
Rev 2/15/17
Rev 2/15/17Rev 2/15/17
Rev 2/15/17