Enabling Devices Mini Popper 751 User manual

For Technical Support:
For Technical Support:For Technical Support:
For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST
1-800-832-8697
[e-mail]
Mini Popper #751
USER’S GUIDE
50 Broadway
Hawthorne, NY 10532
Tel. [phone] / Fax [phone]
Toll Free 800.832.8697
www.enablingdevices.com

Absolutely delightful!
Absolutely delightful!Absolutely delightful!
Absolutely delightful!
Press anywhere from the rim to the top of the Mini Popper and enjoy
music, bouncing balls, vibration, and lights. A great item for increasing
visual attention, tactile awareness and auditory development. Or
activate it with your favorite switch (not included . Size: 8"D x 4"H.
Requires 2 AA Batteries. Weight: 1 lb.
Operation:
Operation:Operation:
Operation:
1. The Mini Popper requires two AA batteries (Not included . Alkaline
batteries are recommended because they last longer. Do not use
rechargeable batteries because they supply lower voltage and the
unit may not perform as well.
2. The battery compartment is located on the bottom of the unit. To
remove the battery compartment cover, unscrew the small Phillips
Head screw, then slide the cover off. Install new batteries, being
careful to observe proper (+ & (- battery polarity. Replace cover
and screw.
3. Activate this toy by depressing the on top or base of the Mini
Popper, or connect the unit to any external capability switch via
the 1/8" jack, located on the side of the unit. If you need to use a
¼ " to 1/8" adapter for your switch, it must be a mono adapter, not
stereo.
4. If you are using an external capability switch, make sure that the
connections between the external capability switch and the
adapter (if applicable and the jack on the Mini Popper are tight.
There should be no gaps.
5. Begin play by either pressing down on top or base of the dome or
by activating the external capability switch. This will send the balls
tumbling around while simultaneously playing music and lighting
up the four surrounding LED lights.
6. The Mini Popper will continue playing while the dome continues to
be held or while the external capability switch continues to be
activated. Once you release, the Dome will stop.
Troubleshooting:
Troubleshooting:Troubleshooting:
Troubleshooting:
Problem:
Problem: Problem:
Problem: The Mini Popper does not work.
Action #1:
Action #1: Action #1:
Action #1: Check or replace the two AA batteries with fresh new
batteries.
Action #2:
Action #2:Action #2:
Action #2: Make sure the Mini Popper is on a flat level surface and
that nothing is restricting any of the four red switch feet on the bottom
of the unit.
Action #3:
Action #3: Action #3:
Action #3: Try a different switch that you know works with other
toys/devices to rule out the Mini Popper as the source of the problem.
Care of Unit:
Care of Unit:Care of Unit:
Care of Unit:
The Mini Popper can be wiped clean with any household multi-
purpose cleaner and disinfectant.
Do not submerge
Do not submergeDo not submerge
Do not submerge the unit, as it will damage the contents and the
electrical components.
Do not use abrasive cleaners,
Do not use abrasive cleaners,Do not use abrasive cleaners,
Do not use abrasive cleaners, as they will scratch the surface of the
unit.
Rev
Rev Rev
Rev 2/14/17
2/14/172/14/17
2/14/17