Enabling Devices Senso Dot Vibrating Switch User manual

For Technical Support:
For Technical Support:For Technical Support:
For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST
1-800-832-8697
[e-mail]
Senso Dot Vibrating Switch #682
USER’S GUIDE
50 Broadway
Hawthorne, NY 10532
Tel. [phone] / Fax [phone]
Toll Free 800.832.8697
www.enablingdevices.com

Heightens sensory awareness!
Heightens sensory awareness!Heightens sensory awareness!
Heightens sensory awareness!
Our tactile and visually stimulating switch provides a wonderful
somatosensory experience when activating any toy or device. The
slightest push on any part of the dome will activate a device while you
feel a soft vibration. The colorful tops can easily be turned round and
round. Size: 6"D x 2¾"H. Requires 2 AAA Batteries. Weight: 1 lb.
Operation:
Operation:Operation:
Operation:
1. The Senso Dot switch requires 2 AAA batteries to operate (Not
included . Use alkaline batteries only (e.g. Duracell or Energizer
brand . Do not use rechargeable batteries or any other type of
batteries because they supply lower voltage and the unit will not
perform properly. Never mix old and new batteries together or
different brands or types together.
2. Gently turn the unit over to face the black battery compartment
cover. Carefully remove the small screw from the battery
compartment cover using a Phillips head screwdriver, and lift the
cover off, it may be necessary to use the end of the screwdriver to lift
one edge of the cover. Observing proper (+ & (- battery polarity,
install 2 AAA size batteries into the holder. Replace the battery
compartment cover and screw. Set the On/Off switch located on the
side of the switch to On.
3. Plug the Senso Dot switch into the jack on your switch-adapted
toy/device.
4. If it is necessary for you to use an adapter, make sure that you use a
MONO adapter, not a STEREO adapter.
5. Make sure that the connection between the Senso Dot switch and
your toy/device is tight. There should be no gaps.
6. Simply press anywhere on the Senso Dot Switch’s textured top to
activate your toy/device.
7. The toy/device will only remain activated while the Senso Dot switch
continues to be actuated. Once you release the switch, the
toy/device will turn off. The user will also feel a gentle vibration from
the switch as long as the switch is being activated.
Troubleshooting:
Troubleshooting:Troubleshooting:
Troubleshooting:
Problem:
Problem: Problem:
Problem: The Senso Dot switch does not activate your toy/device.
Action #1:
Action #1: Action #1:
Action #1: Make sure that the connection between the Senso Dot switch
and your toy/device is tight. There should be no
no no
no gaps. This is a common
error and an easy fix.
Action #2:
Action #2: Action #2:
Action #2: Try a different switch with your toy/device to rule out the
toy/device as the source of the problem.
Action #3:
Action #3: Action #3:
Action #3: Try a different adapter (if applicable to rule this out as the
source of the problem.
Acti
ActiActi
Action #4:
on #4: on #4:
on #4: Make sure the batteries are fresh; this switch will not work
without batteries.
Care of Unit:
Care of Unit:Care of Unit:
Care of Unit:
The Senso Dot switch can be wiped clean with any household multi-
purpose cleaner and disinfectant. We recommend Simple Green, which
is a non toxic biodegradable all-purpose cleaner.
Do not submerge
Do not submergeDo not submerge
Do not submerge the unit, as it will damage the contents and the
electrical components.
Do not use abrasive cleaners,
Do not use abrasive cleaners,Do not use abrasive cleaners,
Do not use abrasive cleaners, as they will scratch the surface of the
unit.
Rev
Rev Rev
Rev 2
22
2/2
/2/2
/2/17
/17/17
/17