EOS SBM-App User manual

Druck-Nr.: 2902 5272
Stand: 08/22
EN
Made in Germany
SBM-App Modul
Module for EOS Spa Control app
Installation and Operating Instructions

EN-2 Installation and Operating Instructions - SBM-App Modul
EN Documentation
1 Documentation
Manufacturer
Original installation and operating instructions EN
Copyright for these installation and operating instructions remains with
EOS Saunatechnik GmbH.
Copyright as per DIN ISO 16016:
The copying and distribution of this document, as well as the use and com-
munication of its contents without express authorisation, are not permit-
ted. Compensation will be claimed in the event of infringements.
All rights reserved with regard to patent claims or submission of design or
utility patent.
Characters, symbols and illustrations
Revision history
EOS Saunatechnik GmbH
Schneiderstriesch 1
35759 Driedorf, Germany
Tel. [phone]
Fax [phone]
Email servicec[email protected]
Web www.eos-sauna.com
Additional information about an operating step
Cross-reference to a page
Read instructions
Result of a step
Table title
Title of figure
Date Version Description
20 Dec. 2021 01.00 First version

SBM-App Modul - Installation and Operating Instructions EN-3
Contents
1 Documentation ..................................................................................................EN-2
1 General safety instructions ..........................................................................EN-5
1.1 Mounting and electrical installation .................................................EN-5
1.2 Operator instruction................................................................................EN-6
1.3 Safety levels................................................................................................EN-8
1.4 Standards and regulations....................................................................EN-8
2 Identification.......................................................................................................EN-9
2.1 Overview......................................................................................................EN-9
2.2 Unit specifications................................................................................. EN-10
2.3 Intended use ........................................................................................... EN-12
2.4 Technical data......................................................................................... EN-13
3 Mounting and electrical installation .................................................... EN-14
3.1 Scope of delivery ................................................................................... EN-14
3.2 Mounting the SBM-App module .....................................................EN-15
3.3 Installing the SBM-App module.......................................................EN-15
4 Operation........................................................................................................... EN-20
4.1 Starting the heating process.............................................................EN-20
4.2 Ending the heating process...............................................................EN-20
4.3 Operating the sauna in Bi-O mode ................................................. EN-21
4.4 Operating the sauna in Finnish mode ........................................... EN-22
4.5 Operating the steam room ................................................................ EN-23
4.6 Operating the infrared cabin ............................................................EN-24
4.7 Operating the Roman bath................................................................ EN-25
4.8 Changing the settings ......................................................................... EN-26
4.9 Cabins ........................................................................................................ EN-27
4.9.1 Adding a cabin .......................................................................EN-27
4.9.2 Disconnecting the cabin..................................................... EN-27
4.9.3 Selecting the cabin............................................................... EN-27

EN-4 Installation and Operating Instructions - SBM-App Modul
EN
4.10 Profiles .......................................................................................................EN-28
4.10.1 Adding a profile......................................................................EN-28
4.10.2 Selecting a profile..................................................................EN-29
4.11 Troubleshooting.....................................................................................EN-30
5 General terms and conditions of service ............................................EN-31
6 Disposal...............................................................................................................EN-34

SBM-App Modul - Installation and Operating Instructions EN-5
General safety instructions
1 General safety instructions
1.1 Mounting and electrical installation
These installation instructions are intended for qualified per-
sonnel familiar with the laws and regulations applicable to
electrical installations at the installation site. Observe the fol-
lowing general safety instructions during mounting, configu-
ration and commissioning of the product.
Risk to life and limb and risk of fire
Risk to life and limb from electric shock and fire in the event of im-
proper or faulty electrical connection. This risk also applies follo-
wing completion of the installation work.
Ensure compliance with the applicable standards and regula-
tions for electrical installation.
The system must be disconnected and removed entirely from
the mains supply before commencing installation and repair
work.
The module housing may not be opened.
Damage due to incorrect mounting location
The module is not suitable for outdoor use.
It must be operated only inside buildings and may not be expo-
sed to environmental conditions such as extreme humidity and
moisture or the possible formation of condensation or corrosi-
ve substances in the ambient air, as well as other weather con-
ditions.
Similarly, excessive cold and extreme exposure to sunlight must
be prevented.
Protect the unit accordingly if there is an increased risk of me-
chanical damage.

EN-6 Installation and Operating Instructions - SBM-App Modul
EN General safety instructions
1.2 Operator instruction
During commissioning, the operator of the sauna/infrared cabin or steam
room must be instructed in relation to the following general safety instruc-
tions: The operator must be given a copy of the operating instructions.
Risk of electric shock
A risk to life and limb from electric shock and fire arises in the event
of improper repair work. This risk also applies after work is comple-
ted.
Repairs and installations must only be performed by a trained
specialist.
The system must be disconnected and removed entirely from
the mains supply before commencing repair work.
Use only original spare parts from the manufacturer.
Fire hazard
Objects placed on the heater can easily be ignited and cause fires.
If you switch on the heater using pre-set timers or a remote con-
trol, attach a protective cover to the heater or install a suitable
safety system (e.g. rocker switches, EOSafe).

SBM-App Modul - Installation and Operating Instructions EN-7
General safety instructions
Operation by children or persons with reduced mental
capacity
Children and persons with reduced mental capacity can be a risk.
Children must be supervised to ensure they do not play with
the unit.
Children under 8 years of age must not operate the sauna/infra-
red cabin or steam room.
The settings for the heating period may only be used by child-
ren under 8 years of age if they are supervised by an adult.
Operation of a sauna/infrared cabin or steam room must not be
started by persons with reduced mental capacity or limited
physical or sensory abilities unless they are supervised or unless
they have already been instructed in its use and understand the
risks.

EN-8 Installation and Operating Instructions - SBM-App Modul
EN General safety instructions
1.3 Safety levels
Safety instructions and important operating instructions are classified
according to ANSI Z535.6. Please familiarise yourself with the following
terms and symbols:
WARNING
Warning
Indicates a hazardous situation which, if not avoided, could result
in death or serious injury.
CAUTION
Caution
Indicates a hazardous situation which, if not avoided, could result
in minor or moderate injury.
NOTICE
Notice
Indicates a hazardous situation which, if not avoided, will result in
damage to the unit.
1.4 Standards and regulations
For an overview of the standards that were observed during design and
construction of the sauna heaters, please refer to the individual product's
technical data sheet that can be downloaded from www.eos-sauna.com.

EN-9 Installation and Operating Instructions - SBM-App Modul
EN Identification
2 Identification
The SBM-App module is used in conjunction with the EOS Spa Control App
for the remote control of selected functions in sauna cabins, IR cabins and
steam rooms.
2.1 Overview
Overview of SBM-App module
A Housing
B Ethernet port
C Pairing LED
D Pairing button
A
D
C
B

EN-10 Installation and Operating Instructions - SBM-App Modul
EN Identification
2.2 Unit specifications
Nameplate
The nameplate is attached to the side of the SBM-App module.
Nameplate
A Manufacturer
B Hardware ID
C MAC address
D CE marking
E Product name
F Manufacturer address
G Country of manufacture
HWID: FFFF2D00FFFFFFFF9448454E2000158001
SBM App Modul
EOS Saunatechnik GmbH
Schneiderstriesch 1
D-35759 Driedorf
A
B
C
D
E
F
G

SBM-App Modul - Installation and Operating Instructions EN-11
Identification
Requirements for operation and storage
The SBM-App module must only be mounted outside of sauna cabins, IR
cabins and steam rooms. The installation location must meet the following
environmental conditions:
Ambient temperature during operation -10°C to 40°C
Storage temperature: -20°C to 60°C
No condensing or corrosive atmosphere
The SBM-App module can be operated with one of the following control
units:
EmoTec series (firmware R4.00 and higher)
EmoStyle/InfraStyle series (firmware R4.00 and higher)
EmoTouch 3 series (firmware R2.33 and higher)
Check your control unit’s software version. Update your software if it does
not match the specifications above. The control units are not included in
the scope of delivery.
For more information on the control units, please refer to the relevant ope-
rating instructions.

EN-12 Installation and Operating Instructions - SBM-App Modul
EN Identification
2.3 Intended use
The SBM-App module serves as an extension to the control units of the
EmoTec, EmoStyle, InfraStyle and EmoTouch 3 series in connection with
the EOS Spa Control App for remote control of selected functions in sauna
cabins, infrared cabins and steam rooms.
This type of remote control is designated as a telecontrol* as per
EN 60355-1.
Therefore, an additional safety measure is required as per EN 60335-2-53
when used in conjunction with a sauna cabin.
This safety measure could be a protective cover on the heater, a door
supervision device or another type of technical equipment. Always ensure
that a safety measure of this nature is installed.
*Telecontrol = setting up, controlling and/or regulating a device with a
command that can be given outside of the visual range of a device, whe-
reby the transmission media such as telecommunication, audio enginee-
ring or bus systems are used; also included are pre-set timers and weekly
timers (from EN 60335-1).
Foreseeable misuse
The following are considered instances of foreseeable misuse:
The connecting cables are connected incorrectly.
The cabin addresses are programmed incorrectly.
The unit is operated without knowledge of or compliance with the saf-
ety instructions.
Operation takes place in conjunction with a sauna cabin that does not
comply with the valid safety standards.
Operating, service and maintenance requirements are not observed.
The unit is operated by children or persons with reduced mental capa-
city or by persons who have not been thoroughly instructed in its use.
1 General safety instructions, EN-5

SBM-App Modul - Installation and Operating Instructions EN-13
Identification
2.4 Technical data
Ambient temperature -10°C to +40°C
Storage temperature -20°C to +60°C
Module housing Plastic
Module dimensions
(H x W x D)
62 x 90 x 18 mm
Control units EmoTec series (firmware R4.00 or higher), EmoStyle/Inf-
raStyle series (firmware R4.00 or higher), EmoTouch 3
series (firmware R2.33 or higher)
Connections 1 x EOS sauna bus (RJ12 plug 6P6C)
1 x 10/100 BaseT Ethernet RJ45 socket, shielded
Power supply 24 V DC via EOS sauna bus cable
Module energy
consumption
< 1 W
Terminal torque 0.22 to 0.25 Nm
Operating systems that
support the app
iOS, Android
Port required for
connection
7250
Variable IP address
assignment
Via DHCP, IPv4

EN-14 Installation and Operating Instructions - SBM-App Modul
EN Mounting and electrical installation
3 Mounting and electrical installation
This chapter describes how to install and set up the SBM-App module.
NOTICE
Damage due to incorrect mounting location
Weather conditions lead to the formation of condensation in the
housing of the SBM-App module and destroy the lines and circuit
boards.
Mount and operate the module only inside buildings.
Protect the module from splashes of water, high levels of humi-
dity or moisture. Protect the module in a suitable housing (IPx4,
see DIN EN 60335-2-53).
Protect the module from conditions in the ambient air that pro-
mote corrosion.
Protect the module from frost and direct sunlight.
Protect the module from mechanical damage.
Salt aerosols should only be used inside the cabin.
3.1 Scope of delivery
The following components are included in the scope of delivery:
SBM-App module
Sauna bus cable
Installation and Operating Instructions
Check the scope of delivery for completeness prior to mounting and instal-
lation.

SBM-App Modul - Installation and Operating Instructions EN-15
Mounting and electrical installation
3.2 Mounting the SBM-App module
You require:
Standard Ethernet cable (RJ45)
Relay box
Internet access point (router/DSL modem)
The SBM-App module is designed to be mounted on a profile rail and can
be mounted either next to the relay box (recommended) or next to the
internet access point (router/DSL modem).
Mounting
1Ensure that the relay box is disconnected from the power supply.
2Mount the SBM-App module on a profile rail.
3Connect the sauna bus cable of the SBM-App module to a free sauna bus
connection (RJ12) on the relay box.
To connect the sauna bus cable to the relay box, observe the installa-
tion instructions for the relay box.
4Connect the SBM-App module to an internet access point (router/
DSL modem) via a standard Ethernet cable (RJ45).
3.3 Installing the SBM-App module
You require:
Pointed object (e.g. paper clip)
Mobile device (iOS, Android)
Internet connection (e.g. router/DSL modem)
Internet connection for mobile device
EOS Spa Control app

EN-16 Installation and Operating Instructions - SBM-App Modul
EN Mounting and electrical installation
Installation
1Switch on the relay box.
The SBM-App module is supplied with power via the sauna bus.
2Check the SBM-App module’s internet connection.
The SBM-App module will attempt to establish an internet connecti-
on on its own. Internet connection is established when the right-
hand LED below the Ethernet port lights up green continuously. The
left-hand LED below the Ethernet port flashes green when there is
network activity. Ensure that the firewall is not blocking the internet
connection (port 7250 must be available).
3Download the EOS Spa Control app from the App Store (iOS) or Play Sto-
re (Android) and install it on your mobile device.
4Open the EOS Spa Control app.
5Choose Start setup ».

SBM-App Modul - Installation and Operating Instructions EN-17
Mounting and electrical installation
6Enter the SBM-App module’s individual MAC address.
It can be found on the SBM-App module’s nameplate. See
Nameplate, EN-10
7Choose Start pairing ». Have the pointed object (e.g. paper clip) ready.

EN-18 Installation and Operating Instructions - SBM-App Modul
EN Mounting and electrical installation
8Within 60 seconds, press and hold the pairing button on the SBM-App
module with a pointed object for approx. 2 seconds.
The time remaining is displayed in the app. If pairing does not occur
within 60 seconds, the MAC address entry screen reappears and pai-
ring can be repeated.
If the pairing button is pressed for a period of time that is too short or
too long, pairing cannot take place. Only after the pairing button has
been released and pairing is successful, the pairing LED will illumina-
te red briefly.
If pairing is not successful:
a) Ensure that the SBM-App module and the mobile device are connec-
ted to the internet.
b) Ensure that the pairing button is pressed and held for approx.
2 seconds.
If pairing is successful, a message is displayed in the app and the pai-
ring LED on the SBM-App module briefly illuminates red.

SBM-App Modul - Installation and Operating Instructions EN-19
Mounting and electrical installation
9Choose Next ».
10 Enter a sauna name.
Additional cabins can be entered later.
11 Choose Start control » to complete installation.

EN-20 Installation and Operating Instructions - SBM-App Modul
EN Operation
4 Operation
4.1 Starting the heating process
1Press and at the same time and hold for 3 seconds.
The heating process starts.
4.2 Ending the heating process
1Choose .
The cabin is in drying program mode. The duration of the drying pro-
gram can be set on the control panel (factory setting: 30 minutes).
Once the duration of the drying program has elapsed, the cabin is
switched off.
2To switch off the drying program prematurely:
3Confirm the prompt.