Epson S5U1C33001H User manual

Nov/06/2013
errata_ICD33v6_5e
S1C33 Manual errata
ITEM:
Object manuals Document codes Items Pages
S5U1C33001H400 Manual 411437800a4.3 Top panel 16
(Error)
LED4 (TRC)
This LED will emit a constant light blue light when ICD mode is selected (DIP SW2 and SW3 set to
OPEN).
(OFF) Trace OFF
(Light blue) Trace ON
(Yellow) Trace ON (memory full)
Note: With firmware Ver 1.0, this LED will emit a constant light blue light even when the trace
function is disabled. This issue is scheduled to be corrected in the next firmware update.
(Correct)
LED4 (TRC)
This LED will emit a constant light blue light when ICD mode is selected (DIP SW2 and SW3 set to
OPEN).
(Light blue) Trace ON or Trace OFF
(Yellow) Trace ON (memory full)

Dec/1/2009
errata_ICD33v6_4e
S1C33 Manual Errata
Subject: C33 Core
Relevant manuals/documents Errata No. Description Page
S5U1C33001H1400 Manual 411437800a
3 COMPONENTS INCLUDED WITH
PACKAGE
4.3 Top panel
7 to 8
15
Error
3. COMPONENTS INCLUDED WITH PACKAGE
........
(5) Target system power supply cable (4-4pin) ...................................................................1
(6) Target system interface connectors (10-pin) ................................................................ 1
(7) Target system interface connectors (4-pin)................................................................... 1
(8) Target system power supply connectors (4-pin) .......................................................... 1
(9) User registration card........................................…...................English/Japanese, 1 each
(10) Warranty card........................................................................English/Japanese, 1 each
(11) Usage precautions................................................................English/Japanese, 1 each
(12) Manual download guide........................................................English/Japanese, 1 each
Fig 2 Package components
Correction
3. COMPONENTS INCLUDED WITH PACKAGE
........

Dec/1/2009
errata_ICD33v6_4e
(5) Target system power supply cable (4-4pin) (One side Flat type) ..................................1
(6) Target system power supply cable (4-4pin) ........................... ...... ................................1
(7) Target system interface connectors (10-pin) ................................................................ 1
(8) Target system interface connectors (4-pin)................................................................... 1
(9) Target system power supply connectors (4-pin) .......................................................... 1
(10) User registration card......................................…...................English/Japanese, 1 each
(11) Warranty card........................................................................English/Japanese, 1 each
(12) Usage precautions................................................................English/Japanese, 1 each
(13) Manual download guide........................................................English/Japanese, 1 each
*Please contact us if you need (6) of the target system power supply cable.
Fig 2 Package components
Error
4.3 Top panel
Fig 6 Top panel

Dec/1/2009
errata_ICD33v6_4e
Correction
4.3 Top panel
Fig 6 Top panel
* Please contact us if you do not have the product to which the top panel has been changed.

Dec/1/2009
errata_ICD33v6_3e
S1C33 Manual Errata
Subject: C33 Core
Relevant manuals/documents Errata No. Description Page
S5U1C33001H1400 Manual 411437800a5.3 Connector for flash programmer
power supply 22
Error
Table 5 Pin assignment of the flash programmer power supply connector (white)
Correction
Table 5 Pin assignment of the flash programmer power supply connector (white)

Jan/28/2009
errata_ICD33v6_2e
S5U1C Manual Errata
Subject: Useof S5U1C33001H when powered off
Relevant manuals/documents Errata No. Description Page
S5U1C33001H1400 manual 411437800a10.3 Note on use of S5U1C33001H 35
Error
No descriptions on the subject mentioned above.
Correction
Descriptions are added. The relevant section in the S5U1C33001H1400 manual is 10.3.10.
About the use of S5U1C33001H when powered off
When the target IC is operated while the S5U1C33001H connected to it is powered off, leakage
current may flow from the target IC to the S5U1C33001H. If this happens, the behavior of the
target IC is not guaranteed, so disconnect the target system connecting cable from the target
IC before operating it.
The target IC operates correctly if the DISO pin of the target system connection cable is not
connected when the S5U1C33001H is powered on. If the DSIO pin is connected, the target
IC may go into the debugging mode.

2008/08/21
errata_ICD33v6_1e
S1C33 Manual errata
C33 cores supported C33
Object manuals Document code Object number
S5U1C33001H (Ver.6) 411437800aSPECIFICATIONS
(Error)
Table 11 Connectors recommended for target system
Components Items Specifications Remarks
Target system interface
cable (4-pin)
Connectors 4-pin(Straight):HKP04M5S(manufactured by Honda Tsushin)
4-pin(low angle):HKP04M5LS(manufactured by Honda
Tsushin)
Target system interface
cable(4-pin)
Connectors 10-pin(Straight):J3654-6002SC(manufactured by 3M)
10-pin(low angle):J3654-5002SC(manufactured by 3M)
Flash programmer
power supply
cable(4-pin)
Connectors 4-pin(Straight):HKP04M5S(manufactured by Honda Tsushin)
4-pin(low angle):HKP04M5LS(manufactured by Honda
Tsushin)
(Correct)
Table 11 Connectors recommended for target system
Components Items Specifications Remarks
Target system interface
cable (4-pin)
Connectors 4-pin(Straight):HKP04M5S(manufactured by Honda Tsushin)
4-pin(low angle):HKP04M5LS(manufactured by Honda
Tsushin)
Target system interface
cable(4-pin)
Connectors 10-pin(Straight):J3654-6002PL(manufactured by 3M)
10-pin(low angle):J3654-5002PL(manufactured by 3M)
Flash programmer
power supply
cable(4-pin)
Connectors 4-pin(Straight):HKP04M5S(manufactured by Honda Tsushin)
4-pin(low angle):HKP04M5LS(manufactured by Honda
Tsushin)