Erbe VIO 200 D User manual

80114-291 02.16
ELECTROSURGERY
QUICK GUIDE
VIO®200 D
This quick guide is no substitute for briefing and user manual. This quick guide does not include any safety notes. Make yourself familiar
with the safety notes in the user manuals.
Necessary operating steps
The long edge of the return electrode (1) must point to the operating
field.
If the red return electrode symbol lights up, check the following:
•Is the return electrode correctly connected to the device?
•Does the long edge of the return electrode point to the operating
field?
•Does the return electrode have sufficient contact to the skin?
!
1Switch on the device
2Select program
3Check settings
4Apply and connect return electrode
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5Monitor return electrode
Correct Error
6Connect instruments
ATTENTION: You may only plug monopo-
lar 4 mm Ø connectors into the receptacle
with the blue ring (1). Otherwise you
damage the device.
7For APC applications, open argon bottle
1

© Erbe Elektromedizin GmbH Hotline [phone] www.erbe-med.com
Optional operating steps
8Changing mode
9Changing effect
10 Changing power limit
1
2
11 Selecting the focus view of a receptacle
12 Allocating foot switch or AUTO START
1
2