Evco Vcolor 318 M User manual

144V739E4.00 - 12/2022
Vcolor 739 M/L
Electronic controllers with 5” or 7” TFT graphic display
for multifunctional ice cream and patisserie machines
WARNING
Non-observance of these
instructions may result in death
or serious injury.
Make sure you read and fully
understand the manual before
using this device.

144V739E4.00 ·Vcolor 739 M/L
CONTENTS
12/2022
| 2 |
IMPORTANT INFORMATION.............................................................................................................. 5
IMPORTANT SAFETY INFORMATION................................................................................................ 6
SAFETY INFORMATION RELATING TO THE PRODUCT..................................................................... 7
1. INTRODUCTION............................................................................................................................... 8
1.1 Description ............................................................................................................................................. 9
1.2 Available models .................................................................................................................................... 9
1.3 Features .................................................................................................................................................. 9
1.4 Accessories ..........................................................................................................................................10
2. TECHNICAL DATA.......................................................................................................................... 11
2.1 Introduction .........................................................................................................................................12
2.2 Technical specications......................................................................................................................12
2.2.1 Base board .................................................................................................................................................12
2.2.2 User interface............................................................................................................................................12
2.3 I/O specications ................................................................................................................................13
2.3.1 Base board .................................................................................................................................................13
2.3.2 User interface............................................................................................................................................13
3. MECHANICAL ASSEMBLY............................................................................................................ 14
3.1 Before you start ...................................................................................................................................15
3.2 Information concerning installation and the surrounding environment .......................................15
3.3 Dimensions for models mounted with protruding front panel ........................................................16
3.3.1 Vcolor 739 M user interface....................................................................................................................16
3.3.2 Vcolor 739 L user interface......................................................................................................................16
3.3.3 Base board .................................................................................................................................................17
3.4 Flush mounting model dimensions .....................................................................................................18
3.4.1 Vcolor 739 M user interface....................................................................................................................18
3.4.2 Vcolor 739 L user interface......................................................................................................................18
3.5 Vcolor 739 installation.........................................................................................................................19
3.5.1 Mounting with protruding front panel ....................................................................................................19
3.5.2 Flush mounting from the rear of the panel .............................................................................................20
3.6 Base power board installation............................................................................................................22
3.7 Minimum installation distances..........................................................................................................22
3.7.1 Vcolor 739 M/L user interface ................................................................................................................22
3.7.2 Base board .................................................................................................................................................22
4. ELECTRICAL CONNECTIONS........................................................................................................ 23
4.1 Wiring best practices ..........................................................................................................................24
4.1.1 Wiring guidelines.......................................................................................................................................24
4.1.2 Guidelines for screw terminals ...............................................................................................................25
4.1.3 Permitted cable lengths............................................................................................................................25
4.2 Wiring diagrams...................................................................................................................................25
4.2.1 Vcolor 739 M user interface....................................................................................................................25

144V739E4.00 ·Vcolor 739 M/L
CONTENTS
12/2022
| 3 |
4.2.2 Vcolor 739 L user interface......................................................................................................................26
4.2.3 Vcolor 739 M/L base board .....................................................................................................................27
4.3 Connection example ............................................................................................................................28
5. USER INTERFACE .......................................................................................................................... 29
5.1 Interface ...............................................................................................................................................30
5.2 Icons......................................................................................................................................................30
5.3 Touch keys ............................................................................................................................................30
5.4 Function keys/icons ............................................................................................................................30
5.5 Using the controller .............................................................................................................................31
5.5.1 Controller ON/OFF ....................................................................................................................................31
5.5.2 Backlighting ...............................................................................................................................................32
5.5.3 Homepage ..................................................................................................................................................32
5.6 Settings menu .......................................................................................................................................33
5.7 Data log .................................................................................................................................................35
5.7.1 Alarm log ....................................................................................................................................................35
5.7.2 Completed recipe log ................................................................................................................................35
5.7.3 Counter log.................................................................................................................................................35
5.8 View alarm list ......................................................................................................................................36
5.9 Change Date and Time .........................................................................................................................36
5.10 Machine info.......................................................................................................................................36
5.11 Change language................................................................................................................................37
5.12 In/out status ......................................................................................................................................37
5.13 Output test (EXPERT/OEM ONLY) .....................................................................................................38
5.14 Internal data reset (EXPERT/OEM ONLY)........................................................................................38
5.15 Parameter management (EXPERT/OEM ONLY) ..............................................................................39
5.16 PID setup (OEM ONLY) .......................................................................................................................39
6. RECIPE BOOK ................................................................................................................................ 40
6.1 Introduction .........................................................................................................................................41
6.2 Creating recipes from an .ODS le .....................................................................................................41
6.2.1 Cooking phases .........................................................................................................................................42
6.2.2 Pause phase...............................................................................................................................................42
6.2.3 Cooling and maintenance phase..............................................................................................................42
6.3 Creating a recipe with mixture density control via .ods le ............................................................43
6.4 Filling in the recipe info screen...........................................................................................................43
6.5 Assigning a product name and photo to the recipe ..........................................................................44
6.6 Changing recipe values before the cycle starts or while it is in progress .....................................44
6.6.1 Advanced congurations .........................................................................................................................45
6.7 Saving recipe changes.........................................................................................................................46
6.8 Running a recipe program...................................................................................................................46

144V739E4.00 ·Vcolor 739 M/L
CONTENTS
12/2022
| 4 |
6.8.1 Machine statuses......................................................................................................................................46
6.8.2 Quick edit in real time screen ..................................................................................................................46
6.8.3 Key functions .............................................................................................................................................47
6.8.4 Progress graph..........................................................................................................................................47
7. FUNCTIONS.................................................................................................................................... 49
7.1 Standard operation..............................................................................................................................50
7.1.1 Delayed start .............................................................................................................................................50
7.1.2 Cooking, Pause and Cooling phase..........................................................................................................51
7.1.3 Maintenance phase...................................................................................................................................51
7.1.4 Extraction phase .......................................................................................................................................51
7.2 Operation with special maintenance .................................................................................................52
7.2.1 Mode 1........................................................................................................................................................52
7.2.2 Mode 2........................................................................................................................................................52
7.2.3 Mode 3........................................................................................................................................................52
7.3 Operation with mixture density control.............................................................................................52
7.4 Special cycles .......................................................................................................................................53
7.4.1 Cooling cycle..............................................................................................................................................53
7.4.2 Cleaning cycle............................................................................................................................................53
7.4.3 Continuous mixing cycle...........................................................................................................................53
7.5 Independent safety temperature for each recipe............................................................................53
7.6 Power failure management.................................................................................................................53
8. REGULATORS................................................................................................................................. 54
8.1 Heaters..................................................................................................................................................55
8.2 Compressor ..........................................................................................................................................55
8.3 Condenser fans ....................................................................................................................................55
8.4 Crankcase heater ................................................................................................................................55
8.5 Half/full load solenoid valve ...............................................................................................................55
8.6 Technical room fans.............................................................................................................................55
8.7 Defrost solenoid valve .........................................................................................................................55
8.8 Gearmotor.............................................................................................................................................56
8.9 Single speed arm rotation ...................................................................................................................56
9. PARAMETERS ................................................................................................................................ 57
9.1 Description of columns in the Table of Parameters .........................................................................58
9.2 Table of conguration parameters for Vcolor 739 ..........................................................................58
9.3 Table of Inverter conguration parameters.....................................................................................61
10. DIAGNOSTICS ............................................................................................................................. 62
10.1 Introduction .......................................................................................................................................63
10.2 Table of Vcolor 739 alarms ...............................................................................................................63
10.3 Table of inverter alarms....................................................................................................................64

144V739E4.00 ·Vcolor 739 M/L 12/2022
| 5 |
IMPORTANT INFORMATION
Liability and residual risks
EVCO assumes no liability for any damage caused by the following (by way of example; this is not an exhaustive list):
• Installation/useforpurposesotherthanthosespeciedand,inparticular,notadheringtothesafetyprovisionssetout
by current regulations in the country in which the product is installed and/or contained in this manual;
• Useinappliancesthatdonotguaranteesufcientprotectionagainstelectricshocks,wateranddustwithinthe
installation conditions created;
• Useinappliancesthatallowaccesstohazardouspartswithouttheuseofakeyedortooledlockingmechanismwhen
accessing the instrument;
• Tampering and/or modifying the product;
• Installation/use in appliances which do not comply with current regulations in the country in which the product is
installed.
The customer/manufacturer is responsible for ensuring their machine complies with these regulations.
EVCO’s responsibility is limited to the correct and professional use of the product in accordance with regulations and the
instructions contained in this manual and other product support documents.
TocomplywithEMCstandards,observealltheelectricalconnectioninstructions.Asitdependsonthewiringconfigurationas
wellastheloadandtheinstallationtype,compliancemustbeverifiedforthefinalmachineasspecifiedbytherelevantproduct
standard.
Disclaimer
This document is the exclusive property of EVCO. It contains a general description and/or a description of the technical
specifications for the services offered by the products listed herein. This document should not be used to determine the
suitability or reliability of these products in relation to specific user applications. Each user or integration specialist should
conducttheirowncompleteandappropriateriskanalysis,inadditiontocarryingoutaproductevaluationandtestinrelation
to its specific application or use. Users can send us comments and suggestions on how to improve or correct this publication.
Neither EVCO nor any of its associates or subsidiaries shall be held responsible or liable for improper use of the information
contained herein.
EVCOhasapolicyofcontinuousdevelopment;therefore,EVCOreservestherighttomakechangesandimprovementstoany
product described in this document without prior notice.
The images in this document and other documentation supplied with the product are provided for illustrative purposes only and
may differ from the product itself.
The technical data in this manual is subject to change without prior notice.
Terms and Conditions of use
Permitted use
Thedevicemustbeinstalledandusedinaccordancewiththeinstructionsprovidedand,inparticular,hazardousliveparts
must not be accessible under normal conditions.
The device must be suitably protected from water and dust with regard to its application and must also only be accessible with
the aid of a tool (with the exception of the front panel).
Only qualified personnel may install the product or perform technical support procedures on it.
The customer must only use the product as described in the documentation relating to that product.
Prohibited use
Anyuseotherthanthosedescribedinthe"Permitted use"sectionandintheproductsupportdocumentationisprohibited.
Disposal
The device must be disposed of in accordance with local regulations regarding the collection of electrical and
electronic appliances.
Consider the environment
Thecompanyworkstowardsprotectingtheenvironment,whiletakingaccountofcustomerrequirements,
technological innovations in terms of materials and the expectations of the community to which we belong. EVCO
placesgreatimportanceonrespectingtheenvironment,encouragingallassociatestobecomeinvolvedwithcompany
valuesandguaranteeingsafe,healthyandfunctionalworkingconditionsandworkplaces.
Please consider the environment before printing this document.

144V739E4.00 ·Vcolor 739 M/L 12/2022
| 6 |
IMPORTANT SAFETY INFORMATION
Please read this document carefully before installation; study all the warnings before using the device. Only use the device in
accordance with the methods described in this document. The following safety messages may be repeated several times in
thedocument,toprovideinformationregardingpotentialhazardsortoattractattentiontoinformationwhichmaybeusefulin
explaining or clarifying a procedure.
Thissymbolisusedtoindicateariskofelectricshock.
Itisasafetyindicationandassuch,shouldbeobservedtoavoidpotentialaccidentsorfatalities.
Thissymbolisusedtoindicateariskofseriouspersonalinjury.
Itisasafetyindicationandassuch,shouldbeobservedtoavoidpotentialaccidentsorfatalities.
DANGER
DANGER indicatesasituationofimminentdangerwhich,ifnotavoided,will lead to death or serious injury.
WARNING
WARNING indicatesasituationofimminentdangerwhich,ifnotavoided,may lead to death or serious injury.
CAUTION
CAUTION indicatesapotentiallyhazardoussituationwhich,ifnotavoided,could cause minor or moderate injury.
NOTICE
NOTICE indicates a situation not related to physical injuries but which ,ifnotavoided, could damage the equipment.
NOTE:themaintenance,repair,installationanduseofelectricalequipmentmustonlybeentrustedtoqualifiedpersonnel.
QUALIFIED PERSONNEL
Only suitably trained and experienced personnel capable of understanding the content of this manual and all documentation
regardingtheproductareauthorisedtoworkonandwiththisequipment.Furthermore,thepersonnelmusthavecompleted
coursesinsafetyandmustbeabletorecogniseandpreventtheimplieddangers.Thepersonnelmusthavesuitabletraining,
knowledgeandexperienceatatechnicallevel,andbecapableofanticipatinganddetectingpotentialriskscausedbyusing
theproduct,aswellaschangingthesettingsandmodifyingthemechanical,electricandelectronicequipmentfortheentire
systeminwhichtheproductisused.Allpersonnelworkingonandwiththeproductmustbeentirelyfamiliarwiththerelevant
standardsanddirectives,aswellassafetyregulations.

144V739E4.00 ·Vcolor 739 M/L 12/2022
| 7 |
SAFETY INFORMATION RELATING TO THE PRODUCT
Beforecarryingoutanyworkontheequipment,readtheseinstructionscarefully,makingsureyouunderstandeverything.
DANGER
RISK OF ELECTRIC SHOCK, EXPLOSION OR ELECTRIC ARC
• Only use electrically insulated measuring devices and equipment.
• Do not install the equipment while the power supply is connected.
• Cutoffthepowersupplytoallequipment,includinganyconnecteddevices,beforeinstalling/uninstallingthedevice.
• AlwaysuseaproperlycalibratedVoltmetertomakesurethesystemispoweredoff.
• Do not touch the unshielded components or the terminals while they are live.
• Donotopen,disassemble,repairormodifytheproduct.
• Do not expose the equipment to liquids or chemicals.
• Before applying voltage to the equipment:
• Makesureallprotectiveelements,suchascovers,hatchesandgrilles,arefittedand/orclosed.
• Checkallwiringconnections.
DANGER
RISK OF ELECTRIC SHOCK AND FIRE
• Do not use the device with loads greater than those indicated in the technical data section.
• Do not exceed the temperature and humidity ranges indicated in the technical data section.
• Usetherequiredsafetyinterlocks(fusesand/ormagnetothermalswitches)ofasuitablesize.
DANGER
RISK OF ELECTRIC SHOCK OR MALFUNCTIONING OF THE EQUIPMENT
Do not use damaged products or accessories.
Thisdevicewasdesignedtooperateinnon-hazardousenvironments,excludingapplicationsthatgenerate,orcouldpotentially
generate,hazardousatmospheres.Onlyinstallthisdeviceinareasandforapplicationswhicharereliablyfreefromhazardous
atmospheres.
DANGER
RISK OF EXPLOSION
• Onlyinstallandusethisdeviceinsitesthatarenotatrisk.
• Donotinstallorusethisdeviceinapplicationswhicharecapableofgeneratinghazardousatmospheres,suchas
applications that use flammable refrigerants.
WARNING
MALFUNCTIONING OF THE EQUIPMENT
• Perform the wiringcarefully,incompliancewithelectromagneticcompatibilityandsafetyrequirements.
• Makesurethewiringiscorrectforitsapplication.
• Use shielded cables for all I/O signal and communication cables.
• Minimisethelengthoftheconnectionsasmuchaspossible,toavoidwindingthecablesaroundelectricallyconnectedparts.
• Thesignal(digitalandanalogueinputs,communicationandcorrespondingpowersupplies)andpowercablesforthedevice
must be routed separately.
• Beforeapplyingthepowersupply,checkallthewiringconnections.
• Usethenecessarysafetyinterlockswherevertheriskofinjurytopersonneland/orequipmentdamageexists.
• Installandusethisdeviceinacabinetofasuitableclassfortheintendedenvironment,protectedbyakeyedlocking
mechanism or other suitable instruments.
• Intermsofconnectionandthefusesusedinthecircuitsforthepowersupplyandoutputlines,observelocalandnational
regulatory requirements relating to the nominal current and voltage for the equipment in use.
• Do not use this equipment for machine functions that are critical to safety.
• Donotdisassemble,repairormodifytheequipment.
• Do not connect wires to unused terminalsand/orterminalsmarkedwiththetext“Noconnection”(“N.C.”).

144V739E4.00 ·Vcolor 739 M/L 12/2022
| 8 |
1. INTRODUCTION
Chapter content
This chapter contains the following information:
Subject Page
Description 9
Available models 9
Features 9
Accessories 10

144V739E4.00 ·Vcolor 739 M/L 12/2022
| 9 |
1.1 DESCRIPTION
Vcolor 739 M/L controllers are the EVCO solution for complete management of multifunctional ice cream and patisserie
machines,andcanbeusedto:
• Knead;
• Cook;
• Pasteurise;
• Whisk;
• Etc.
Vcolor 739 M/L controllers consist of:
• Built-in base power board;
• Remote user display interface.
TheremoteuserinterfaceconsistsofacustomisablecolourTFTgraphicdisplayfeaturingcapacitivetouchscreentechnology,
available in two sizes with horizontal alignment:
• 5” touchscreen TFT display;
• 7” touchscreen TFT display.
Plus,theEVCOrangeofdisplaysofferstheusertwodifferenttypesofinterfaceinstallation,foroptimumflexibility:
• User interface mounted with protruding front panel (see “3.5.1 Mounting with protruding front panel" on page 19);
• User interface mounted ush with the back of the panel (see “3.5.2 Flush mounting from the rear of the panel" on page 20).
The innovative Vcolor 739 M/L programmable platform allows fully independent management of the following:
• Controller graphics customisation;
• Additionandmanagementofupto72ready-to-userecipes(byaddinghigh-qualityphotos);
• The addition of other languages other than those made available by EVCO.
1.2 AVAILABLE MODELS
The Vcolor 739 M/L series includes 2 controllers:
• Vcolor 739 M-Controllerformultifunctionalmachineswitha5"display;
• Vcolor 739 L -Controllerformultifunctionalmachineswitha7"display.
1.3 FEATURES
The main features of the Vcolor 739 M/L series are:
• 3analogueinputsfortemperature,forPt1000probes;
• 5digitalinputs,including:
• 2 voltage-free digital inputs;
• 3 hazardous voltage digital inputs;
• 10 non-sealed relay outputs;
• 212Vdc15mAmaximumoutputsforexternalSSRrelaycontrol;
• 1RS-485MODBUSRTUserialportontheuserinterface;
• 2USB-Aports:
• 1USB-Aportonthebaseboard(forprogramming);
• 1USB-Aportontheuserinterface(forgraphiccustomization);
• EPoCA-compatible.
NOTE:forfurtherinformationregardinginputandoutputspecifications,pleaserefertoparagraph“2.2 Technical
specifications" on page 12 .

144V739E4.00 ·Vcolor 739 M/L 12/2022
| 10 |
1.4 ACCESSORIES
The Vcolor 739 M/L range is supplemented with the following accessories:
Type P/n Description
--- Pt1000 temperature probes
EVIF25SWX EVlinkingRS-485/Wi-Fimodule
--- CJAV55 Kit for removable terminals on the power base
ECTSFD004 Safetytransformer230Vac/12Vac,20VA
--- 0812000002 USBplugtypeAIP65
EVUSB4096M USBflashdrive4096MB
--- 0810500018 USB2.0cable,2m,M/M
--- 0810500020 USB2.0cable,0.5m,M/M
EVIF20SUXI NonoptoisolatedRS-485/USBserialinterface

144V739E4.00 ·Vcolor 739 M/L 12/2022
| 11 |
2. TECHNICAL DATA
Chapter content
This chapter contains the following information:
Subject Page
Introduction 12
Technical specifications 12
I/O specifications 13

144V739E4.00 ·Vcolor 739 M/L 12/2022
| 12 |
2.1 INTRODUCTION
AllthesystemcomponentsofVcolor 739 M/L controllers satisfy European Community (EC) requirements for built-in
equipment. They must be installed in casing or another location designated on the basis of specific environmental conditions
andinordertominimisetheriskofinvoluntarycontactwithhazardousvoltage.Usemetalcasingtoimproveimmunitytothe
electromagnetic fields of the Vcolor 739 M/L system. This equipment satisfies the EC requirements as indicated in the tables
below.
WARNING
MALFUNCTIONING OF THE EQUIPMENT
Do not exceed any of the nominal values specified in this section.
2.2 TECHNICAL SPECIFICATIONS
2.2.1 Base board
Type Description
The product complies with the following harmonised standards: EN60730-1 and EN60730-2-9
Device construction: Incorporated electronic device
Device purpose: Operating control device
Type of action: 1
Pollution category: 2
Overvoltage category: II
Nominal pulse voltage: 2500 V
Power supply: 12Vac/dc,±10%,50/60Hz
Consumption: 10VAmaximum
Ambientoperatingconditions: 0...55°C(32...131°F)10…90%RHnon-condensing
Transportation and storage conditions: -25...70°C(-13...158°F)10…90%RHnon-condensing
Softwareclass: A
Ambientfrontprotection: IP00
2.2.2 User interface
Type Description
The product complies with the following harmonised standards: EN60730-1 and EN60730-2-9
Device construction: Incorporated electronic device
Device purpose: Operating control device
Type of action: 1
Pollution category: 2
Overvoltage category: I
Nominal pulse voltage: 330 V
Power supply: 12Vac/dc±10%,50/60Hz(frompowersupplyunit)
Consumption: 20VAmaximum
Ambientoperatingconditions: 0...55°C(32...131°F)10…90%RHnon-condensing
Transportation and storage conditions: -25...70°C(-13...158°F)10…90%RHnon-condensing
Softwareclass: A
Ambientfrontprotection: IP65
RTC: Built-in lithium battery
RTC drift: ≤60s/monthat25°C(77°F)
Battery life: > 6 months at 25 °C (77 °F)
Battery charging time: 24 h using instrument power supply

144V739E4.00 ·Vcolor 739 M/L 12/2022
| 13 |
2.3 I/O SPECIFICATIONS
2.3.1 Base board
Type Description
Voltage-free digital inputs: 2 voltage-free digital inputs
Hazardousvoltagedigitalinputs: 3 hazardous voltage digital inputs
Analogueinputsfortemperature: 3 analogue inputs for Pt1000 probes
Lowvoltage(SELV)digitaloutputs: 10 low voltage digital outputs
212Vdc15mAmaximumoutputsforexternalSSRrelaycontrol
Serialports: 1xRS-485fieldbuscommunicationserialportforconnection
with user interface
1xRS-485fieldbuscommunicationserialportforconnection
with inverter
1xUSB2.0typeAserialport(operationguaranteedwith
EVUSB4096M)
Analogue input specications
Default Pt1000
Class B
Pb3 Tankprobe •
Pb4 Heaterprobe •
Pb5 Condenser probe •
Range --- -50...200 °C
(-58…392 °F)
Solution --- 0.1 °C (1 °F)
Input
impedance --- >30kΩ
Digital output specications
Relay output Default Description Load (at 250 Vac) Load type
Out1 (SSR) Heaters 12Vdc,15mAmaximumforexternalSSR --- ---
Out2 (SSR) Heaters 12Vdc,15mAmaximumforexternalSSR --- ---
Out3 Heaters(ON/OFF) SPDT 2A Resistive
Out4 Armdrive SPST 2A Resistive
Out5 Armgearmotor SPST 2A Resistive
Out6 Compressor SPST 2A Resistive
Out7 Defrost solenoid valve SPST 2A Resistive
Out8 Halfloadsolenoidvalve SPST 2A Resistive
Out12 Crankcaseheaters SPDT 2A Resistive
Out13 Condenser fan SPST 2A Resistive
Out14 Technical room fans SPST 2A Resistive
Out15 Cooling solenoid valve SPST 2A Resistive
2.3.2 User interface
Type Description
Serialports: 1xRS-485fieldbuscommunicationserialportforconnection
with base board
1xRS-485RTUSLAVEcommunicationserialportfor
connectionwithEPoCAorthird-partymonitoringsystem
1xUSB2.0typeAserialport(operationguaranteedwith
EVUSB4096M)

144V739E4.00 ·Vcolor 739 M/L 12/2022
| 14 |
3. MECHANICAL ASSEMBLY
Chapter content
This chapter contains the following information:
Subject Page
Before you start 15
Information concerning installation and the surrounding environment 15
Dimensions for models mounted with protruding front panel 16
Flush mounting model dimensions 18
Vcolor 739 installation 19
Base power board installation 22
Minimum installation distances 22

144V739E4.00 ·Vcolor 739 M/L 12/2022
| 15 |
3.1 BEFORE YOU START
Read this manual carefully before installing the system.
Inparticular,thesafetyinstructions,electricalrequirementsandcurrentregulationsforthemachineortheprocessinwhich
this device is involved must be observed. The use and application of the information contained herein requires experience in
thedesignandprogrammingofautomatedcontrolsystems.Onlytheuser,integratorormanufacturerofthemachinecanbe
familiarwithalltheconditionsandfactorswhichariseduringinstallationandconfiguration,operationandmaintenanceofthe
machineortheprocess,andassuchcanidentifytherelevantautomationequipmentandthecorrespondinginterlocksand
safety systems which can be used effectively and appropriately. When selecting automation and control equipment and other
connectedequipmentandsoftware,foraparticularapplication,youmustconsiderallapplicablelocal,regionalandnational
standards and/or regulations.
WARNING
REGULATORY INCOMPATIBILITY
Makesurealltheequipmentusedandthesystemsconformtoallapplicablelocal,regionalandnationalregulationsand
standards.
3.2 INFORMATION CONCERNING INSTALLATION AND THE SURROUNDING ENVIRONMENT
Beforecarryingoutanyworkontheequipment,readtheseinstructionscarefully,makingsureyouunderstandeverything.
DANGER
RISK OF ELECTRIC SHOCK, EXPLOSION OR ELECTRIC ARC
• Only use electrically insulated measuring devices and equipment.
• Do not install the equipment while the power supply is connected.
• Cutoffthepowersupplytoallequipment,includinganyconnecteddevices,beforeinstalling/uninstallingthedevice.
• AlwaysuseaproperlycalibratedVoltmetertomakesurethesystemispoweredoff.
• Do not touch the unshielded components or the terminals while they are live.
• Donotopen,disassemble,repairormodifytheproduct.
• Do not expose the equipment to liquids or chemicals.
• Before applying voltage to the equipment:
• Makesureallprotectiveelements,suchascovers,hatchesandgrilles,arefittedand/orclosed.
• Checkallwiringconnections.
Thisdevicewasdesignedtooperateinnon-hazardousenvironments,excludingapplicationsthatgenerate,orcouldpotentially
generate,hazardousatmospheres.Onlyinstallthisdeviceinareasandforapplicationswhicharereliablyfreefromhazardous
atmospheres.
DANGER
RISK OF EXPLOSION
• Only install and use this deviceinsitesthatarenotatrisk.
• Donotinstallorusethisdeviceinapplicationswhicharecapableofgeneratinghazardousatmospheres,suchas
applications that use flammable refrigerants.
WARNING
MALFUNCTIONING OF THE EQUIPMENT
• Performthewiringcarefully,incompliancewithelectromagneticcompatibilityandsafetyrequirements.
• Makesurethewiringiscorrectforitsapplication.
• Use shielded cables for all I/O signal and communication cables.
• Minimisethelengthoftheconnectionsasmuchaspossible,toavoidwindingthecablesaroundelectricallyconnectedparts.
• Thesignal(digitalinputs,analogueinputs,communicationandcorrespondingpowersupplies)andpowercablesforthe
device must be routed separately.
• Beforeapplyingthepowersupply,checkallthewiringconnections.
• Usethenecessarysafetyinterlockswherevertheriskofinjurytopersonneland/orequipmentdamageexists.
• Installandusethisdeviceinacabinetofasuitableclassfortheintendedenvironment,protectedbyakeyedlocking
mechanism or other suitable instruments.
• Intermsofconnectionandthefusesusedinthecircuitsforthepowersupplyandoutputlines,observelocalandnational
regulatory requirements relating to the nominal current and voltage for the equipment in use.
• Do not use this equipment for machine functions that are critical to safety.
• Donotdisassemble,repairormodifytheequipment.
• Do not connect wires to unused terminalsand/orterminalsmarkedwiththetext“Noconnection”(“N.C.”).

144V739E4.00 ·Vcolor 739 M/L 12/2022
| 16 |
3.3 DIMENSIONS FOR MODELS MOUNTED WITH PROTRUDING FRONT PANEL
3.3.1 Vcolor 739 M user interface
mm (in.)
94 (3.70)
Fig. 1. Protruding front panel Vcolor 739 M user interface dimensions
3.3.2 Vcolor 739 L user interface
mm (in.)
47 (1.85)
132 (5.20)
Fig. 2. Protruding front panel Vcolor 739 L user interface dimensions

144V739E4.00 ·Vcolor 739 M/L 12/2022
| 17 |
3.3.3 Base board
mm (in.)
33
(1.30)
131 (5.16)
91.5 (3.60)
108.5 (4.27)
110 (4.33)
249 (9.80)
Ø 4 (0.157)
Fig. 3. Base board dimensions

144V739E4.00 ·Vcolor 739 M/L 12/2022
| 18 |
3.4 FLUSH MOUNTING MODEL DIMENSIONS
3.4.1 Vcolor 739 M user interface
35 (1.38)
118 (4,64)
1.9 (0.07)
Fig. 4. Flush mounting Vcolor 739 M user interface dimensions
3.4.2 Vcolor 739 L user interface
mm (in.)
50 (1.97)
156 (6.14)
3 (0.12)
Fig. 5. Flush mounting Vcolor 739 L user interface dimensions

144V739E4.00 ·Vcolor 739 M/L 12/2022
| 19 |
3.5 VCOLOR 739 INSTALLATION
3.5.1 Mounting with protruding front panel
Vcolor 739 M
user interface
Vcolor 739 L
user interface
130 (5.11)
88,4 (3.48)
178.2 (7.01)
118.2 (4.65)
mm (in.)
Fig. 6. Installing Vcolor 739 M user interface with protruding front panel
Panel thickness
Thispanelthicknessdependingonthematerialusedtomakeit:
Material Thickness (X) [mm (in.)]
Metal 0.8...1.5 (0.03...0.06)
Plastic 0.8...3.4 (0.03...0.13)

144V739E4.00 ·Vcolor 739 M/L 12/2022
| 20 |
3.5.2 Flush mounting from the rear of the panel
142.25 (5.60)
94.25 (3.71)
Vcolor 739 M
Vcolor 739 L
Installation result
190 (7.48)
R8.1
129 (5.08)
R10.13
mm (in.)
mm (in.)
Fig. 7. Flush mounting Vcolor 739 M/L user interface from the rear of the panel
Panel thickness
Thethicknessofthepanelusedforflushinstallationfromthebackofapaneldependingonthemodel:
Model Thickness (X) [mm (in.)]
Vcolor 739 M 1.9 (0.07)
Vcolor 739 L 3.0 (0.12)