fantastic furniture Farrah User manual

Version 1.0
Farrah
fantasticfurniture.com.au
King Bed Super

fantasticfurniture.com.au Page 2Page 2
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
fantasticfurniture.com.au
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!

Assembly checklist
Useful information
Read through the instructions carefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used as they may not fit through a door once assembled.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Please see page 2 for any safety requirements or weight restrictions.
Page 3
fantasticfurniture.com.au

Footboard (P2)
fantasticfurniture.com.au Page 4
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver
Hardware pack
Footboard (P2) ; Side Rail-R(P3) ; Side Rail-L(P4) ;Headboard and Footboard Legs (P5) ;
Centre Rail(P6) ; Bracket(P7) ; Support Leg(P8) ; Hardware Pack
Parts list
Box 1 :
Box 2 :
Box 3 :Slats(P9)
Headboard(P1)
Side Rail-R(P3)
Headboard (P1)
Bracket(P7)
Support Legs(P8)
Centre Rail(P6)
Side Rail-L(P4)
Slats(P9)
Headboard and
Footboard Legs(P5)
Headboard and
Footboard Legs(P5)
Bracket(P7)
(H1)
4 x 18mm Big Head Bolts
(H2)
14 x Small Bolts
(H3)
2 x Big Bolts
(H4)
42 x Small Screws
(H6)
(H5)
1 x Allen Key
8 x Washers

(P1)
Attach 2 x headboard legs (P5) to the bottom of the headboard (P1) and
fantasticfurniture.com.au Page 5
Step 1
Step 2
(P5)
Attach 2 x footboard legs (P5) to the bottom of the footboard (P2) and
(P2)
(P5)
rotate clockwise to secure.
rotate clockwise to secure.

Step 3
fantasticfurniture.com.au Page 6
You will need
Allen Key
(H6)
8 x Small Bolts
(H2)
Install 8 x small bolts (H2) into the nuts of the headboard (P1) and tighten two thirds
of the way with the allen key (H6) as shown.
Attach 2 x side rails (P3/P4) to the headboard (P1) and footboard (P2) by slotting
the bracket on the side rails (P3/P4) over the bolts as shown.
4 x 18mm Bolts
(H1)
(P1)
(P2)
(P3)
(P4)
Headboard Footboard
(P1)
8mm
8mm
(H2)
(H6)
(H1)
(H6)
Install 4 x 18mm bolts (H1) into the brackets of the footboard (P2) and tighten two
thirds of the way with the allen key (H6) as shown.
Do not fully tighten the bolts yet.
(P3)/(P4)

Step 4
fantasticfurniture.com.au Page 7
You will need
Allen Key
(H6)
2 x Big Bolts
(H3)
4 x Washers
(H5)
2 x Small Bolts
(H2)
(H6)
(H2)
(H5)
(H5)
(H3)
(P7)
(P6)
(P8)
(H6)
(H2)
(H5)
(P7)
Make sure the ends are aligned
Attach 2 x support legs (P8) to the centre rail (P6) as shown using 2 x big bolts (H3) and
Attach 2 x brackets (P7) to the ends of the centre rail (P6) as shown using 2 x small bolts (H2)
2 x washers (H5), tightening using the Allen key (H6).
and 2 x washers (H5), tightening with the Allen key (H6).
Step 5
(H2)
(H5)
(H6)
You will need
Allen Key
(H6)
4 x Washers
(H5)
(H2)
(P1)
(P2)
(P3)
(P4)
(P6)
(P8)
Turn the feet on the support legs (P8)
anti-clockwise so they are touching the floor.
Insert the centre rail (P6) between the headboard (P1) and footboard (P2) as shown.
Do not fully tighten the bolts yet.
Secure using 4 x small bolts (H2) and 4 x washers (H5), tightening with the allen
Countersunk holes should face up
key (H6).
4 x Small Bolts

fantasticfurniture.com.au Page 8
Step 6
(P1)
(P2)
77.5 77.5
Allen Key
(H6)
42 x Small Screws
(H4)
You will need
Phillips head
Screwdriver
(not provided)
Ensure the inner space is square and even as shown above.
Attach the slats (P9) to the assembled frame using 42 x small screws (H4) and the
Phillips head screwdriver. Ensure the slats are centred before screwing them to
(H4)
(P9)
(H6)
(P1)
(P2)
(P4)
(P3)
You may now tighten all bolts on the headboard (P1), footboard (P2) and side rails (P3/P4).
the bed frame.

Step 7
Job complete!
In the interest of our environment please dispose
of all packaging thoughtfully.
fantasticfurniture.com.au Page 9