fantastic furniture Hamilton Lowline Large User manual

Version 1.0
Hamilton
Lowline Large
fantasticfurniture.com.au

fantasticfurniture.com.au Page 2
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Recommended weight capacity : 50kgs on top.
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Parts list
Top Panel (P1);
Left Side Panel (P2);
Right Side Panel (P3);
Divider (P4);
Divider (P5);
Shelf Panel (P6);
Bottom Panel (P7);
2 x Back Panels (P8):
Back Panel (P9):
2 x Door (P10) :
Rail (P11);
2 x Support Leg (P12)
Hardware pack
Top Panel
(P1) Right Side
Panel
(P3)
Left Side
Panel (P2)
Back Panel
(P8)
Back Panel
(P8)
Back Panel
(P9)
Door
(P10)
Door
(P10)
Bottom
Panel
(P7)
Rail
(P11)
Support Leg
(P12)
Support Leg
(P12)
Shelf
Panel (P6)
Divider
(P4)
Divider
(P5)
21 x Cam
Bolts
(H3)
21 x Cam
Nuts
(H4)
18 x Dowels
(H1)
18 x Small
Screws
(H5)
2 x Magnetics
Bars
(H6)
4 x Hinges
(H9)
2 x Handle Bolts
(H11)
2 x Handles
(H10)
4 x Screws
(H2)
8 x Wedges
(H12)
12 x Wedge
Screws
(H13)
2 x Magnetics
(H8)
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver
Page 4
fantasticfurniture.com.au
DO NOT USE
2 x Adjusters
(H7)

(P3)
(P1)
(P2)
You will need
Step 1
Step 2
You will need
Phillips Head
Screwdriver
6 x Cam Bolts
(H3)
Phillips Head
Screwdriver
Attach 8 x Cam Bolts (H3) and 2 x Magnetics (H8) to Top Panel (P1) with 4 x Wedge
Screws (H13) by tightening with the Phillips Head Screwdriver.
Attach 6 x Cam Bolts (H3) to Left & Right Side Panels (P2&P3) by tightening with the
Phillips Head Screwdriver.
fantasticfurniture.com.au Page 5
H3
H3
H3
H3
H3
H3 H3
H3
H3
H3 H3
H8
H8
H13
H13
H13
H8
H3
H3
H3
8 x Cam Bolts
(H3)
2 x magnetics
(H8)
4 x Wedge
Screws (H13)

You will need
Step 3
Step 4
You will need
Attach 3 x Cam Bolts (H3) to Rail (P11) by tightening with the Phillips Head Screwdriver. Insert
2 x Dowels (H1) into Bottom Panel (P7) as shown. Insert 3 x Cam Nuts (H4) into Bottom Panel (P7)
as shown. Rotate the cam nuts so the arrow points towards the incoming cam bolts. Attach Rail
(P11) to Bottom Panel (P7) by tightening the Cam Nuts (H4) with the Phillips Head Screwdriver.
Insert 2 x Dowels (H1) into Left Side Panel (P2) as shown. Insert 3x Cam Nuts (H4)
into Rail & Bottom Panel (P11&P7) as shown. Rotate the cam nuts so the arrow points
towards the incoming cam bolts. Attach Rail & Bottom Panel (P11&P7) to Left Side
Panels (P2) by tightening the Cam Nuts (H4) with the Phillips Head Screwdriver.
Phillips Head
Screwdriver
2 x Dowels
(H1)
Phillips Head
Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
(P11)
(P11)
(P2)
(P11)
(P7)
(P7)
fantasticfurniture.com.au
fantasticfurniture.com.au Page 6
H3
H3
H3
H1
H1
H1
H4
H4
H4
H4
H4
3 x Cam Bolts
(H3)
3 x Cam Nuts
(H4)
2 x Dowels
(H1)
3 x Cam Nuts
(H4)

Insert 2 x Dowels (H1) into
Right Side Panel (P3) as shown.
Insert 3 x Cam Nuts (H4) into Rail &
Bottom Panel (P11&P7) as shown. Rotate the cam nuts so the arrow points towards the incoming
cam bolts. Attach Rail & Bottom Panel (P11&P7) to Right Side Panel (P3) by tightening the Cam
Nuts (H4) with the Phillips Head Screwdriver.
Attach 4 x Cam Bolts (H3) to Dividers (P4&P5) by tightening with the Phillips Head Screwdriver.
You will need
Phillips Head
Screwdriver
Step 6
You will need
Step 5
3 x Cam Nuts
(H4)
Phillips Head
Screwdriver
(P11)
(P7)
(P4)
(P5)
(P3)
fantasticfurniture.com.au Page 7
H4
H3
H3
H3
H3
H1
2 x Dowels
(H1)
4 x Cam Bolts
(H3)

Insert 4 x Dowels (H1)
into Dividers (P4&P5)
as shown. Insert 4x Cam
Nuts (H4) into Shelf
Panel (P6) as shown.
Rotate the cam nuts so the
arrow points towards the incoming
cam bolts. Attach Dividers (P4&P5) to Shelf Panel (P6) by tightening the Cam Nuts (H4)
with the Phillips Head Screwdriver.
You will need
Step 7
Insert 4 x Dowels (H1) into Bottom Panel (P7) as shown. Attach Dividers (P4&P5)
to Bottom Panel (P7) with 4 x Screws (H2) by tightening with the Phillips Head
Screwdriver.
Phillips Head
Screwdriver
4 x Cam Nuts
(H4)
You will need
Step 8
Phillips Head
Screwdriver
Laminated edge
face up
(P7)
(P6)
(P5)
(P5)
(P4)
(P4)
H4
H1
H1
H1
H1
H4
H4
H4
H1
H1
H2
H2
H2
H2
fantasticfurniture.com.au Page 8
4 x Dowels
(H1)
4 x Dowels
(H1)
4 x Screws
(H2)

Step 10
Gently stand the unit upright. Slide Back Panels (P8x2 & P9) into the grooves of
Dividers & Left & Right Side Panels (P4 & P5 & P2 & P3).
You will need
Step 9
Attach Adjustable Support Legs (P12x2) to Bottom Panel (P7). Attach 2 x Adjusters (H7) to
Support Legs (P12x2).
(P2)
(P12)
(P12)
(P2)
(P3)
(P3)
(P4)
(P8)
(P8)
(P9) (P5)
(P7)
H7
fantasticfurniture.com.au Page 9
H7
2 x Adjusters
(H7)

You will need
Step 11
8 x Cam Nuts
(H4)
Phillips Head
Screwdriver
Insert 4 x Dowels (H1) into
Left & Right Side Panels
(P2&P3) as shown. Insert
8x Cam Nuts (H4) into Dividers
& Left & Right Side Panels (P4&P5&
P2&P3) as shown. Rotate the
cam nuts so the arrow points towards
the incoming cam bolts. Attach Top Panel (P1) to Dividers & Left & Right Side
Panels (P4&P5&P2&P3) by tightening the Cam Nuts (H4) with the Phillips Head Screwdriver.
Attach 4 x Hinges (H9) to Doors (P10x2) with 8 x Small Screws (H5) by tightening with
the Phillips Head Screwdriver.
Step 12
You will need
Phillips Head
Screwdriver
(P1)
(P10) x2
(P2)
(P3)
(P5)
(P4)
H5
H9
H9 H9
H5
H1
H1
H4
H4
H4 H4
H5
fantasticfurniture.com.au Page 10
4 x Dowels
(H1)
8 x Small
Screws (H5)
4 x Hinges
(H9)