fantastic furniture MADISON Bar stool 1 STR User manual

www.fantasticfurniture.com.au
Version 1.0
MADISON
Bar stool 1 STR

www.fantasticfurniture.com.au
Enjoy
Your purchase from
Australia’s Best Value Furniture Store
Do not stand on, or use this chair as a step ladder.
Use this product for seating one person at a time.
This product should be checked periodically to ensure all
components are secure and all hardware is tight.
CAUTION
RECOMMENDED WEIGHT CAPACITY 120 KG
PAGE 2

Read through the instructions carefully
before you begin.
Assembly checklist
Identify and lay out all of the components
before you begin assembly. Unless instructed, do not fully tighten screws
until the item is fully assembled.
!Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
!The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
!Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
!Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used in as they may not fit through a door once assembled.
!Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
!If you are having any difficulties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
PAGE 3www.fantasticfurniture.com.au

www.fantasticfurniture.com.au
What you need
to assemble the product
PAGE 4
1 x Back Frame
(P1)
1 x Seat Frame
(P2)
2 x Front Legs
(P3)
9 x Medium Bolts
(H1)
9 x Washers
(H3)
Allen Key
Please make sure you have all these parts before you start.
Note: Hardware pack
inside of seat
2 x Side
(P4)
1 x Front
(P5)
Rails Rail
6 x Screws
(H2)
6

www.fantasticfurniture.com.au PAGE 5
Step 1
Step 2
4 x Washers
(H3)
You will need
Allen key
P3
Insert Front Rail (P5 ) into the corresponding holes in Front legs (P3). Attach using
4 x Medium Bolts
(H1)
Insert 4 x medium Bolts (H1) and 4 x
Washers (H3).
Do not fully tighten bolts, leave a little
loose at this stage.
H2
P5
P2
H3 H1
You will need
Allen key
6 x Screws
(H2)
2
2 x Screws (H2) .Do not fully tighten screws, leave a little loose at this stage.

www.fantasticfurniture.com.au PAGE 6
Step 3
Step 4
5 x Washers
(H3)
You will need
Allen key
Insert Side Rails (P4 ) into the corresponding holes in Back frame (P1). Attach using
Do not fully tighten bolts, leave a little loose at this stage.
5 x Medium Bolts
(H1)
Attach front section from Step 2 to Back section from Step 3 using 5 x medium Bolts (H1) and 5 x
Washers (H3). Do not fully tighten bolts, leave a little loose at this stage
P4
H2
H1
H3
5
You will need
Allen key
6 x Screws
(H2)
2
2 x Screws (H2) .
P1

www.fantasticfurniture.com.au PAGE 7
Step 6
Step 5
Allen key
You will need
Apply downward pressure on the seat pad to ensure the chair is level before tightening all bolts
and screws firmly with Allen Key and Screw D river
H2
You will need
Allen key
6 x Screws
(H2)
2
Attach side rails (P4) to front legs using 2 x Screw s (H2) .

In the interest of our environment
Please dispose of all packaging thoughtfully
www.fantasticfurniture.com.au
Job Complete !
PAGE 8
Step 7