fantastic furniture Java User manual

Version 1.0
Java
Lowline Medium
fantasticfurniture.com.au
Required
Two People

fantasticfurniture.com.au Page 2
Rattan
Rattan is a natural material that will respond to humidity in the
environment. Low humidity may cause the rattan to shrink.
High humidity may cause the rattan to absorb moisture and expand,
causing the weaving to look loose and wavy.
This is a natural phenomenon and not a defect.
Looks like you’ve found
your Fantastic!
Love it? Share it!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Fantastic buy! Share how it looks at home on Instagram
for your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
!Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
!The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
!Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
!Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
!Never use any glue until you are certain that the parts belong together.
!Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
!If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
!Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au Page 3

Parts list
1 x Top Panel (P1)
1 x Bottom Panel (P2)
2 x Side Panels (P3)
1 x Divider Panel (P4)
1 x Back Panel (P5)
1 x Door (P6)
1 x Door (P7)
1 x Large Middle Leg (P8)
1 x Small Middle Leg (P9)
4 x Legs (P10)
What you need
to assemble the product
Other tools you need
Flat Head Screwdriver;
Phillips Head Screwdriver;
Mallet
fantasticfurniture.com.au
Page 4
Top Panel (P1)
Bottom Panel (P2)
Back Panel (P5)
Side
Panel
(P3)
Side
Panel
(P3)
Divider
Panel
(P4)
Leg (P10)
Leg (P10) Leg (P10)
Leg (P10)
Large Middle
Leg (P8)
Small Middle
Leg (P9)
Door (P6)
Door (P7)

fantasticfurniture.com.au
Page 5
Hardware Pack
15 x Cam Bolts
(H1)
15 x Cam
Nuts (H2)
14 x Dowels
(H3)
2 x Handles
(H4)
22 x Screws
16mm (H6)
8 x Flat Washers
(H9)
8 x Spring
Washers (H10)
4 x Screws
28mm (H11)
1 x Allen Key
(H12)
4 x Felt Feet
(H5)
8 x Bolts
(H8)
6 x Back Panel
Connectors (H7)
1 x Adjustable
Foot (H14)
4 x Guides
(H16)
1 x Screw
38mm (H13)
4 x Rollers
(H15)

Step 1
Page 6fantasticfurniture.com.au
You will need
Attach 1 x felt foot (H5) onto each leg (P10) as shown.
Step 2
You will need
8 x Bolts
(H8)
Attach 1 x leg (P10) onto bottom panel (P2), using 2 x bolts (H8), 2 x spring washers (H10)
and 2 x flat washers (H9). Tighten the bolts with allen key (H12).
Repeat this step for the other 3 x legs (P10).
Screw 3 x cam bolts (H1) into bottom panel (P2), using a phillips head screwdriver.
4 x Felt Feet
(H5)
X4
H5
8 x Flat
Washers (H9)
8 x Spring
Washers (H10)
1 x Allen Key
(H12)
(P10)
H12
H8
H10
H9
(P2)
(P10)
3 x Cam Bolts
(H1)
Phillips Head
Screwdriver
(P10)
(P10)
(P10)
(P10)
H8
H8
H1
H1
(P2)

Step 3
Page 7fantasticfurniture.com.au
You will need
Screw 1 x adjustable foot (H14) into large middle leg (P8).
Insert 2 x dowels (H3) into middle legs (P8, P9).
Use a mallet to gently tap the dowels into place if needed.
Attach small middle leg (P9) to large middle leg (P8)
with 1 x screw (H13), using a phillips head screwdriver.
1 x Screw
38mm (H13)
Phillips Head
Screwdriver
H3
Mallet
2 x Dowels
30mm (H3)
H3
H14
H13
(P8)
(P8)
(P9) (P9)
1 x Adjustable
Foot (H14)
Flat Head
Screwdriver
3 x Cam
Nuts (H2)
Step 4
You will need
Position middle legs (P8, P9) onto bottom panel (P2).
Insert 3 x cam nuts (H2) into middle legs (P8, P9).
Rotate the cam nuts so the arrows point towards
the incoming cam bolts and turn clockwise to lock with
a flat head screwdriver.
With assistance, turn the assembled frame over.
(P2)
H2 H2
(P8)
(P9)
Required
Two People

Step 5
Page 8fantasticfurniture.com.au
You will need
Screw 6 x cam bolts (H1)
into bottom panel (P2),
using a phillips head screwdriver.
6 x Cam Bolts
(H1)
Phillips Head
Screwdriver
Step 6
You will need
Step 7
You will need
Insert 4 x dowels (H3) into
divider panel (P4) as shown.
Insert 4 x dowels (H3)
into side panel (P3) as shown.
Repeat with the other side panel (P3).
Use a mallet to gently tap the dowels into place if needed.
(P2)
H1
6 x Cam Bolts
(H1)
Phillips Head
Screwdriver
Screw 6 x cam bolts (H1) into top panel (P1),
using a phillips head screwdriver.
(P1)
H1
H1
H1
H1
H1
(P3)
12 x Dowels
(H3) Mallet
H3
H3
H3
H3
H1
H1
H1
H1
H1
H1
H3
H3
H3
H3
(P4)
X2

Step 8
Page 9fantasticfurniture.com.au
You will need
Position panels (P3 x 2, P4) onto bottom panel (P2) as shown.
Ensure the grooves on side panels (P3) align with the single groove on bottom panel (P4).
Insert 6 x cam nuts (H2) into panels (P3 x2, P4).
Rotate the cam nuts so the arrows point towards the incoming cam bolts
and turn clockwise to lock with a flat head screwdriver.
Step 9
Slide back panel (P5) into the grooves on side panels (P3) and bottom panel (P2).
Flat Head
Screwdriver
6 x Cam
Nuts (H2)
(P3)
H2
(P3)
(P4)
H2
H2
H2
H2
(P2)
(P5)
Laminated
edge
(P3)
(P4)
(P3)
(P2)

Step 10
Page 10fantasticfurniture.com.au
You will need
With assistance, position top panel (P1) onto panels (P3, P4, P5) as shown.
Make sure the groove in top panel (P1) is on the same side as the side panels (P3).
Insert 6 x cam nuts (H2) into panels (P3 x 2, P4). Rotate the cam nuts so the arrows
point towards the incoming cam bolts and turn clockwise to lock with a flat head screwdriver.
Step 11
You will need
Flat Head
Screwdriver
6 x Cam
Nuts (H2)
(P3) (P4)
(P3)
(P1)
H2
H2
H2
H2
H2
H2
Required
Two People
(P5)
If necessary, gently adjust the top panel (P1) sideways in either direction
until XX and YY are equal.
Holding it in place, fix 6 x back panel connectors (H7) to assembled unit
with 6 x screws (H6) as shown, using a phillips head screwdriver.
Phillips Head
Screwdriver
6 x Screws
16mm (H6)
6 x Back Panel
Connectors (H7)
Required
Two People
H7
H7
H7
H7
H7
H7
(P5)
(P1)
(P1)
XX=YY
XX
YY
XX
YY
H7 H7
H6 (P5)
(P1)
(P5)
(P1)