fantastic furniture Arcadia Lowboy User manual




 �'


Version 1.0
Arcadia
Lowboy 4 Drawer Dark Brown
ntasticfurniture.com.au

Wall attachment guide
For plasterboard
(with available wood stud)
Securing method:
Screw inserted directly into
stud.
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY OR DEATH.
To avoid any serious or fatal injury, a wall strap has been provided with this
product to prevent toppling. We strongly recommend that this product is
permanently fixed to the wall or other suitable surface. Fixing devices are not
included since different surface materials require different attachments.
Please seek professional advice if you are in doubt of what fixing device to use.
To reduce the risk of furniture tipover:
•Do not allow children to stand, climb or hang on furniture. It may topple
and cause serious injury or death.
•Do not place toys or other child appealing items on top of this furniture,
and place heaviest items towards the bottom of the furniture.
• Do not open more than one drawer at the time.
•Anchoring this product to a wall or other suitable surface is recommended.
Check anchors regularly.
•Avoid putting a TV on this product.
Secure it!
Reduce the risk of furniture
tip-over accidents
Recommended Weight Capacity: 50kg on Top; 10kg/Drawer
Page 2
For plasterboard
(without available wood stud)
Securing method:
Self drilling plasterboard
anchor.
For masonry wall
Securing method:
Solid wall: Plug with screw
Hollow wall: Spring toggle
fantasticfurniture.com.aufantasticfurniture.com.au
Please seek professional advice if you are in doubt of what fixing device to use.

Assembly checklist
Useful Information

What you need
Right Side Panel
Right Side Panel
Drawer Front Panels
Drawer Front Panels
Left Drawer Side Panels
Left Drawer
Side Panels
Right Drawer Side Panels
Right Drawer
Side Panels
Drawer Back Panels
Drawer Back Panels
Drawer Base Panels
Drawer Base
Panels
Back Panel A
Back Panel A
Back Panel B
Back Panel B

8
8
7
Attach 8 x large cam bolts (H1) to top panel (P1) using a phillips head screwdriver.
Insert 12 x wooden dowels (H3) into front upper rail (P4), front lower rail (P5),
back panel A (P7) and back panel B (P8).

Insert 2 x wooden dowels (H3) into left side panel (P2).
Attach 4 x left runner tracks (H11) to left side panel (P2) using
12 x small screws (H9), tightening using a phillips head screwdriver.
Ensure the screws are inserted into the holes on the left runner tracks (H11) as shown.
Insert 2 x wooden dowels (H3) into right side panel (P3).
Attach 4 x right runner tracks (H12) to right side panel (P3) using
12 x small screws (H9), tightening using a phillips head screwdriver.
Ensure the screws are inserted into the holes on the right runner tracks (H12) as shown.
Left

5
5
Attach 5 x large cam bolts (H1) into left side panel (P2) using a phillips head screwdriver.
Attach 5 x large cam bolts (H1) into right side panel (P3) using a phillips head screwdriver.

(P3)
Insert 1 x large cam nut (H2) into the front lower rail (P5).
Rotate the cam nuts so the arrows point towards the incoming bolts.
Attach front lower rail (P5) to the right side panel (P3), by tightening the cam nuts
with a phillips head screwdriver. Ensure the side with the cam nut hole faces inwards.
Attach front upper rail (P4) to the right side panel (P3) by aligning the holes.
4
4
Insert 4 x cam nuts (H2) into back panels (P7 & P8).
Rotate the cam nuts so the arrows point towards the incoming bolts.
Attach back panels (P7 & P8) to the right side panel (P3), by tightening cam nuts with a
phillips head screwdriver.

(P4)
Insert 5 x cam nuts (H2) into the rail (P5) and back panels (P7 & P8).
Rotate the cam nuts so the arrows point towards the incoming bolts.
Attach the left side panel (P2) to rails (P4 & P5) and back panels (P7 & P8), by aligning the hol es
and tightening the cam nuts with a phillips head screwdriver.
Secure the front upper rail (P4) with 2 x large screws (H4) by tightening with a
phillips head screwdriver.
(P4) (P5)
(P7)
(P8)
5
5

Insert 8 x cam nuts (H2) into side panels
(P2 & P3). Rotate the cam nuts so the arrows
point toward the incoming bolts.
Attach the top panel (P1) to side panels (P2 &
P3), by tightening the cam nuts with a
phillips head screwdriver.
(P3)
Attach 5 x small cam bolts (H7) to drawer front panel (P9) using a phillips head
screwdriver. Repeat process for the remaining 3 drawers.