fantastic furniture Hamilton Dresser 6 Drawer User manual

Version 1.0
Hamilton
Dresser 6 Drawer
fantasticfurniture.com.au

fantasticfurniture.com.au Page 2
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY.
To avoid any serious or fatal injury, this product has been supplied
with a wall strap to prevent toppling. We strongly recommend that
this product is permanently fixed to the wall or other suitable sur-
face. Connecting attachments for your wall are not included since
dierent surface materials require dierent attachments. Please seek
professional advice if you are in doubt of what wall connections to
use.
Recommended weight capacity : 50kgs on top.
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Parts list
Top Panel (P1);
Left Side Panel (P2);
Right Side Panel (P3);
Top Rail (P4);
2 x Rails (P5);
Bottom Rail (P6);
Divider (P7);
Top Rail (P8):
Bottom Rail (P9):
2 x Back Panels (P10)
6 x Drawer Fronts (P11) :
6 x Left Drawer Sides (P12);
6 x Right Drawer Sides (P13);
6 x Drawer Bases (P14);
6 x Drawer Backs (P15);
Hardware pack
Left Drawer
Side (P12)
Right Drawer
Side (P13)
Drawer Back
(P15)
Drawer
Base (P14)
Drawer
Front (P11)
Top Panel
(P1)
Right Side
Panel
(P3)
Left Side
Panel (P2)
Back Panel
(P10)
Back Panel
(P10)
Top
Rail
(P8)
Top Rail
(P4)
Rail
(P5)
Rail
(P5)
Bottom Rail
(P6)
Divider
(P7)
Bottom
Rail
(P9)
51 x Cam
Bolts
(H3)
51 x Cam
Nuts
(H4)
11 x Dowels
(H1)
72 x Small
Screws
(H5)
6 x CL Runner
Tracks
(H6)
6 x CR Runner
Tracks
(H7)
6 x DR Runners
(H9)
6 x Handle Bolt
(H11)
6 x Handle
(H10)
6 x DL Runners
(H8)
28 x Screws
(H2)
8 x Wedges
(H12)
8 x Wedge
Screws
(H13)
2 x Long
Screws
(H14)
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Page 4
fantasticfurniture.com.au
DO NOT USE
x 6
1 x Safety
Screw
(H16)
1 x Safety
Strap
(H15)
2 x Washers
(H17)

18 x Small
Screws (H5)
(P3)
(P3)
(P2)
(P2)
You will need
Step 1
H7
CR
H5
Step 2
You will need
Phillips Head
Screwdriver
Phillips Head
Screwdriver
16 x Cam Bolts
(H3)
Attach 3 x CL Runner Tracks (H6) to
Left Side Panel (P2) with 9 x Small Screws
(H5) by tightening with the Phillips Head
screwdriver. Attach 3 x CL Runner Tracks (H7)
to Right Side Panel (P2) with 9 x Small Screws (H5) by tightening with the Phillips Head
screwdriver.
Attach 8 x Cam Bolts (H3) to Left Side Panel (P2) by tightening with the Phillips head
screwdriver. Attach 8 x Cam Bolts (H3) to Right Side Panel (P3) by tightening with the
Phillips head screwdriver.
fantasticfurniture.com.au Page 5
3 x CL Runner
Tracks (H6)
H6
CL
H5
H5
H5
H5
H5
H6
H7
H7
H7
H6
H6
H5
H5
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
3 x CR Runner
Tracks (H7)

You will need
Step 3
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Step 4
You will need
Attach 3 x CL RunnerTracks (H6),
3 x CR Runner Tracks (H7) and 4 x
Cam Bolts (H3) to Divider Panel (P7) with
18 x Small Screws (H5) by tightening with the
Phillips Head Screwdriver.
Attach 1 x Cam Bolt (H3) into
Bottom Rail (P6). Insert 1 x Dowel (H1)
into Top Rail (P4) and 1 x Cam Nut
(H4) into Divider (P7) as shown.
Rotate the cam nuts so the arrow
points towards the incoming cam bolts.
Attach Rails (P4 & P6) to Divider (P7) by
tightening with the Phillips Head Screwdriver.
Phillips Head
Screwdriver
1 x Dowels
(H1)
1 x Cam Nuts
(H4)
Phillips Head
Screwdriver
FLIP
Cam Nut hole
nearby bottom
(P7)
(P7)
(P7)
(P4)
(P6)
H7
CR
H5
fantasticfurniture.com.au
fantasticfurniture.com.au Page 6
H6
CL
H5
H5
H5
H6
H6
H3
H3
H7
H7
H1
H3
H4
H7
H6
H5
H5
H5
H5
18 x Small
Screws (H5)
3 x CL Runner
Tracks (H6)
3 x CR Runner
Tracks (H7)
4 x Cam Bolts
(H3)
1 x Cam Bolts
(H3)

Insert 4 x Cam Nuts (H4) into the holes of Rails (P5). Rotate the cam nuts so the arrow points
towards the incoming cam bolts. Attach Rails (P5) to Divider (P7) by tightening with the Phillips
Head Screwdriver.
Attach Rails (P8 & P9) to Divider (P7) with 4 x Long Screws (H2) by tightening with the
Phillips Head Screwdriver.
You will need
Phillips Head
Screwdriver
Step 6
You will need
Phillips Head
Screwdriver
Step 5
4 x Cam Nuts
(H4)
(P7)
(P5)
(P5)
(P7)
(P9)
(P8)
fantasticfurniture.com.au Page 7
H4
H2
H2
H4
4 x Screws
(H2)

You will need
Step 7
Insert 2 x Dowels (H1) into Right Side Panel (P3). Insert 8 x Cam Nuts (H4) into the holes of
Rails (P4 & P5 & P6 & P8 & P9). Rotate the cam nuts so the arrow points towards the incoming
cam bolts. Attach Rails (P4 & P5 & P6 & P8 & P9) to Right Side Panel (P3) by tightening with the
Phillips Head Screwdriver.
Slide Back Panel (P10) into the grooves of Rails (P8 & P9).
Step 8
Phillips Head
Screwdriver
8 x Cam Nuts
(H4)
2 x Dowels
(H1)
(P3)
(P4)
(P6)
(P5)
(P8)
(P8)
(P9)
(P9)
(P10)
fantasticfurniture.com.au Page 8
H4
H1
H1
H4
H4
H4

You will need
Step 9
Insert 2 x Dowels (H1) into
Left Side Panel (P2). Insert 8 x
Cam Nuts (H4) into the holes of Rails
(P4 & P5 & P6 & P8 & P9). Rotate the
cam nuts so the arrow points towards the incoming cam bolts. Attach Rails
(P4 & P5 & P6 & P8 & P9) to Left Side Panel (P2) by tightening with the Phillips Head Screwdriver.
Gently stand the unit upright. Slide Back Panel (P10) into the grooves of
Left & Right Side Panel (P2&P3).
Step 10
Phillips Head
Screwdriver
8 x Cam Nuts
(H4)
2 x Dowels
(H1)
fantasticfurniture.com.au Page 9
(P2)
(P6)
(P10)
(P3)
(P2)
(P5)
(P8)
(P9)
H4
H4
H1
H1
H4

You will need
Step 12
Phillips Head
Screwdriver
6 x Cam Nuts
(H4)
6 x Dowels
(H1)
You will need
Step 11
Attach 6 x Cam Bolts (H3) to Top Panel (P1) by tightening with the Phillips Head Screwdriver.
Insert 6 x Dowels (H1) and 6 x Cam Nuts (H4) into Divider & Right & Left Side Panels
(P7&P3&P2) as shown. Rotate the cam nuts so the arrows point towards the incoming
cam bolts. Attach Top Panel (P1) to unit by tightening cam nuts with the Phillips
Head Screwdriver.
Phillips Head
Screwdriver
fantasticfurniture.com.au Page 10
(P3)
(P7)
(P1)
(P1)
(P2)
H3
H3
H1
H4
H3
H3
H3
H3
6 x Cam Bolts
(H3)