fantastic furniture Toronto Dresser 6 Drawer User manual

Toronto
Dresser 6 Drawer Dusk Brown
fantasticfurniture.com.au
Version 1.1

Warning: Ensure the wall strap is
To avoid any serious or fatal injury, a wall strap has been provided with
this product to prevent toppling. We strongly recommend that this
product is permanently fixed to the wall or other suitable surface. Fixing
devices are not included since diferent surface materials require
diferent attachments. Please seek professional advice if you are in doubt
attached to avoid serious injury.
of what fixing device to use.
Warning: Ensure the wall strap is
attached to avoid serious injury.
Warning: Ensure the wall strap is
attached to avoid serious injury.
Warning: Ensure the wall strap is
attached to avoid serious injury.
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Page 2
fantasticfurniture.com.au
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
Love it? Share it!

Useful Information
fantasticfurniture.com.au
Make sure you have all the required tools.
Never use power tools unless instructed.
Read through the instructions carefully
before you begin.
Identify and lay out all of the components
before you begin assembly. Unless instructed, do not fully tighten screws
until the item is fully assembled.
Assembly checklist
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Page 3

What you need
to assemble the product
(Tool not provided)
Soft Headed Mallet
(H1)
4 x Gliders
Hardware pack
Please make sure you have all these parts before you start.
Page 4
fantasticfurniture.com.au

15mm
15mm
Use a Soft Headed Mallet to nail the gliders (H1) into the middle of the each leg.
and approximately 15mm from the front and the back side.
Soft Headed Mallet
(H1)
(H1)
(H1)
4 x Gliders
(H1)
You will need
fantasticfurniture.com.au
Page 5
Step 2
Turn the carton upside down (Bottom up).
Open the carton and remove the pallet (P3).
Step 1
(P3)
(H1)

Page 6
fantasticfurniture.com.au
Gently turn carton over and remove carton from dresser.
Unwrap dresser and move into final position. Seek advice from a
qualified trades person on how to attach the safety strap to your specific wall.
Step 3
Step 4

If required to move this dresser for any reason, with assistance ensure you:
A) Fully retract the adjuster.
B) Lift and move the dresser to the new resting position.
C) Extend the adjuster such that it rests on the floor.
Moving the dresser without first retracting the adjuster
may damage your dresser.
Retract
Adjuster
Extend the adjuster
until it rests on
the floor
Page 7
Job Complete !
In the interest of our environment
please dispose of all packing thoughtfully.
fantasticfurniture.com.au