fantastic furniture COSMO Office Chair User manual

Version 1.0
COSMO

your Fantastic!
Looks like you’ve found
Caution:
Do not stand on, or use this chair as a step ladder.
Use this product for seating one person at a time.
This product should be checked perioically to ensure
all components are secure and all hardware is tight.
Recommended weight capacity: 110kg
We’re thrilled you’ve chosen Fantastic Furniture
to hdlp create a home you’ll love!
Love it ?Share it!
Fantas tic buy!Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Assembly checklist
Useful information
Read through the instructionscarefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used in as they may not fit through a door once assembled.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Please see page 2 for any safety requirements or weight restrictions.

to assemble the product
Backrest(P1)X1;
Left Arm(P2)X1;
Right Arm(P3)X1;
Seat(P4)X1;
Seat Plate(P5)X1;
Gas Lift Cover(P6)X1;
Gas Lift(P7)X1 ;
Star Base(P8)X1;
Castor(P9)X5
DO NOT USE
Seat(P4)
Seat Plate(P5)
Gas Lift(P7)
Star Base(P8)
Castor(P9)
Part list
What you need
Gas Lift Cover(P6)
Backrest(P1)
Left Arm(P2)
Right Arm(P3)
4xShort Bolts
(H1) (H5)
Allen Key
4xMedium Bolts
(H2)
4xLong Bolts
(H3)
4xWashers
(H4)

Step 1
Insert 5xCastors(P9)into the Star Base(P8) as shown.Push down firmly on each castor to ensure they are
fixed in position. Insert the Gas Lift(P7) into the top of Star Base(P8). Place the Gas Lift Cover(P6)over
the top of the Gas Lift(P7)as shown.
Gas Lift(P7)
Star Base(P8)
Castor(P9)
Note the front facing orientation of the Seat Plate (P5) and align the holes on the Seat Plate (P5) with the
bottom of the Seat (P4) as shown. Secure the Seat Plate (P5) to the Seat(P4) with 4x Medium Bolts(H2)by
tightening with the Allen Key(H5).
Step 2
You will need
4X Medium
Bolts(H2)
Allen Key
(H5) Seat Plate
(P5)
Seat
(P4)
(H5)
Gas Lift Cover(P6)
(H2) (H2)(H2)
(H2)

Step 3
Attach Left & Right Arms (P2&P3) to Seat (P4) with 4 x Long Bolts (H3) and 4 x Washers (H4) as shown
by tightening with the Allen Key (H5).
Right Arm(P3)
(H3)
(H3)
(H4)
(H4)
(H5)
Left Arm(P2)
Gas Lift(P7)
Seat Plate(P5)
Position the centre hole of the Seat Plate(P5) over the top of Gas Lift(P7). Carefully lower the Seat(P4)
onto the Gas Lift(P7).Press seat down firmly. Check the connection is secure before sitting in the chair
Seat(P4)
t
You will need
4XLong
Bolts(H3)
Allen Key
(H5)
4XWashers
(H4)
Step 4
t
(H3)
(H4)
(H3)
(H4)
Seat(P4)

7
Left Arm(P2)
Right Arm(P3)
Backrest(P1)
Step 5
Slide the Backrest (P1) in between the Left & Right Arms (P2&P3) and align the bolt holes on each side.
Secure the Backrest (P1) to Left & Right Arms (P2&P3)with 4x Short Bolts(H1)by tightening with the Allen
Key(H5).
You will need
4XShort
Bolts(H1)
Allen Key
(H5)
(H5)
(H1)
(H1)
Job Complete!
(H1)
(H1)