fantastic furniture My Choice Headboard User manual

My Choice Headboard
www.fantasticfurniture.com.au
Version 1.0
Assembly Instructions
With UNIVERSAL BRACKETS (Sold Separately)
HEADBOARD

Enjoy
Your purchase from
Australia’s Best Value Furniture Store
www.fantasticfurniture.com.au PAGE 2

Assembly checklist
Useful Information
www.fantasticfurniture.com.au PAGE 3
Read through the instructions carefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! If you are having any difficulties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used in as they may not fit through a door once assembled.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.

Page 4
What you Need:
Please make sure you have all these parts before you start.
Parts list:
Headboard (P1)
H1
4 X LONG BOLTS
Assembled on Headboard (p1)
H2
4 X SHORT BOLTS
Assembled on support leg (p2).
Support leg (P2) Support leg (P2)
Bracket-Left (P3) Bracket-Right (P4)
Other tools you need
Phillips head screwdriver
1 x Headboard (p1)
2 x Support leg (p2)
1 x Bracket - Left (p3)
1 x Bracket - Right (p4)
(Sold separately)Universal Bed Brackets
(Sold separately)
Universal Bed Brackets

Page 5
Step 1
You will need:
Remove short bolts (H2) from Support legs (P2) and long bolts (H1) from back of headboard (P1)
by unscrewing in an anti-clockwise direction, keep the bolts in a safe place as they will be required
during the next steps.
Attach bed brackets to front of Support legs (P2), (opposite side to white circles) using 4 x short bolts (H2)
Phillips head
You will need:
(H2)
4 X SHORT BOLTS (H2)
(P2)
Bracket-Right (P4)
Bracket-Left (P3)
(P3)
Step 2 - If you have purchased Brackets (sold separately).
go to Step 6.
If you haven’t purchased brackets (sold separately),

Step 3
Turn your bedbase on its side and remove the back left and back right castor or glide
by unscrewing in an anti-clockwise direction.
Step 4
Align cut-out holes on bed bracket with bolt hole for castor you just removed from bed-base,
then re-attach castor to base by inserting bolt of castor through the bracket and into castor bolt hole
on bed-base and tighten by screwing in a clockwise direction. Repeat step for the other side of the bed.
Page 6
Bracket-Left (P3)
Bracket-Right (P4)

Step 5
Place metal plate over bolt on castor and screw into bed-base. But do not fully tighten, leave a small gap
of about 4mm for the bracket to slip under, with the help of a second person, slide the bed bracket
attached to the Support leg (P2) between the metal plate and the bed-base and tighten castor to
fix in position.
Step 6
There are two height positions on the headboard to choose. Attach with long bolts (H1) through both holes
on support legs (P2) at the height of your choice to complete assembly.
Page 7
If the hole on your bed-base does not align
with the bed bracket,there is a metal plate that
can be used to secure the bracket to the bed base
Bracket-Left (P3)
Bracket-Right (P4)
You will need:
(H1)
4 X LONG BOLTS
Holes for
lower position
Holes for
high position
(H1)
wider area over the bracket

Page 8
Step 7
The job is now complete!
In the interest of our environment,
please dispose of all packaging thoughtfully.
Move your bed-base into the desired position in
your room and then place your mattress in position
on your bed-base.
www.fantasticfurniture.com.au