fantastic furniture PARKER User manual

Ver1.0
PARKER

Page 3
Please make sure you have all these parts before you start.
1 x Back Frame
(P1)
1 x Seat Frame
(P2)
2 x Front Legs
(P3)
4 x Long Bolts
(H1)
5 x Medium Bolts
(H2)
9 x Washers
(H3)
Note: Hardware pack
inside of seat
Allen Key

Insert Front Legs (P3) into the corresponding holes in Seat Frame (P2). Attach using
4 x Washers (H3) and 4 x Medium Bolts (H2). Do not fully tighten bolts, leave a little loose at this stage.
Attach Seat Frame (P2) to Back Frame (P1) using 4 x Washers (H3) and
4 x Long Bolts (H1). Hand tighten to 80%. Page 4
Step 1
Step 2
H1
H3
P2
P3
H1
P2
P1
4 x Washers
(H3)
4 x Washers
(H3)
(H2)
(H1)
4 x Medium Bolts
H3
P3
H2 H3
NOTE: LEG GOES
FLUSH INTO CORNER

Step 3
Step 4
Page 5
Insert 1 x medium Bolt (H2) and 1x W
asher (H3) and hand tighten to 80%.
Apply downward pressure on the seat pad to ensure the chair is level before tightening all bolts
firmly with Allen Key.
H2
H3
(H2)
1 x medium Bolts
(H3)
1

Version 1.0
Dining table D8
TORONTO
Required
Two People
fantasticfuniture.com.au

Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Page 2
fantasticfurniture.com.au
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
Love it? Share it!

Useful Information
fantasticfurniture.com.au
Make sure you have all the required tools.
Never use power tools unless instructed.
Read through the instructions carefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Assembly checklist
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! If you are having any dicult s assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Page 3

(H1)
8 x Flat Washers
(H3)
8 x Bolts
(H2)
8 x Spring Washers
(H4)
1 x Spanner
(P2)
(P2)
(P2)
(P2)
What you need
to assemble the product
fantasticfurniture.com.au
Page 4
Parts list:
Top panel (P1)
4 x Legs (P2)
(P1)
Please make sure you have all these parts before you start
Hardware pack

(P2)
(P2)
(P2)
(P2)
(H1)
8 x Flat washers
(H2)
8 x Spring washers
(H3)
8 x Bolts
(H4)
1 x Spanner
fantasticfurniture.com.au
Page 5
Put spring washer (H2) and then flat washer (H1) onto bolt (H3).
Align the legs (P2) with table top (P1) and fix with bolt (H3).
Use spanner (H4) to tighten.
Step 1
You will need
Required
Two People
Lay table top panel (P1) upside down on a soft surface as to not damage the top.
(H4)
(H3)
(H2)
(H1)