fantastic furniture Oasis Buffet User manual

Oasis
Buet 3 Door White Rattan
fantasticfurniture.com.au
Version 1.0

fantasticfurniture.com.au Page 2
Recommended weight capacity : 30kg on top.
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
WARNING: ENSURE THE BRACKET IS ATTACHED TO
AVOID SERIOUS INJURY.
To avoid any serious or fatal injury, this product has been supplied
with a wall strap to prevent toppling. We strongly recommend that
this product is permanently fixed to the wall or other suitable sur-
face. Connecting attachments for your wall are not included since
dierent surface materials require dierent attachments. Please seek
professional advice if you are in doubt of what wall connections to
use.
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Parts list
Top Panel (P1);
Bottom Panel (P2);
Left Side Panel (P3);
Right Side Panel (P4);
Divider (P5);
Divider (P6);
3 x Back Panels (P7);
3 x Shelf Panels (P8);
2 x Doors (P9);
Door (P10);
2 x Rails (P11);
2 x Rails (P12)
Hardware pack
Top Panel
(P1)
Shelf Panel
(P8)
Shelf Panel
(P8)
Shelf Panel
(P8)
Door
(P9)
Door
(P9)
Door
(P10)
Right Side
Panel (P4)
Left Side
Panel (P3)
Bottom
Panel (P2)
Rail
(P12)
Rail
(P12)
Rail
(P11)
Rail
(P11)
Back Panel
(P7)
Back Panel
(P7)
Back Panel
(P7)
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Hammer
Page 4
fantasticfurniture.com.au
DO NOT USE
20 x Dowels
(H1)
8 x Long
Screws
(H2)
36 x Small
Screws
(H5)
20 x Cam Bolts
(H3)
20 x Cam Nuts
(H4)
6 x Plastic
Glides
(H9)
3 x Handles
(H10)
6 x Handle
Screws (H11)
4 x Hinges
(H6)
2 x Hinges
(H12)
12 x Shelf Plug
(H13)
Divider
(P5)
Divider
(P6)
8 x Wedges
(H7)
8 x Wedge
Screws
(H8)
2 x Safety
Screw
(H15)
2 x Safety
Strap
(H14)
4 x Washers
(H16)

(P6)
(P4)
(P5)
(P3)
(P1)
(P1)
You will need
Step 1
Step 2
You will need
Attach 8 x Cam Bolts (H3) to Top Panel (P1) as shown by tightening with the
Phillips Head Screwdriver.
fantasticfurniture.com.au Page 5
Phillips Head
Screwdriver
Insert 8 x Dowels (H1) into Top Panel (P1). Insert 8 x Cam Nuts (H4) into Left & Right Side
Panels (P3 & P4) and Dividers (P5 & P6) as shown. Rotate the cam nuts so the arrows
point towards the incoming cam bolts. Attach Left & Right Side Panels (P3 & P4) and
Dividers (P5 & P6) to Top Panel (P1) by tightening all cam nuts with the Phillips
Head Screwdriver.
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
H3
H3
H3
H3
H3
H3
H3
H3
Phillips Head
Screwdriver
8 x Cam Bolts
(H3)
8 x Cam Nuts
(H4)
8 x Dowels
(H1)
H1
H1
H4
H4
H1
H1
H1
H1
H1
H1
H4
H4
H4

Attach 8 x Cam Bolts (H3) to Bottom Panel (P2) as shown by tightening with the
Phillips Head Screwdriver.
fantasticfurniture.com.au Page 6
Step 4
You will need
Phillips Head
Screwdriver
Step 3
Slide Back Panels (P7 x 3) into the grooves of Left & Right Side Panels (P3 & P4)
and Dividers (P5 & P6).
(P4)
(P6)
(P5)
(P3)
(P7)
(P7)
(P7)
(P2)
8 x Cam Bolts
(H3)
H3
H3
H3
H3
H3
H3
H3
H3

Step 6
You will need
Attach 2 x Cam Bolts (H3) to Rail (P12) as shown by tightening with the
Phillips Head Screwdriver.
fantasticfurniture.com.au Page 7
Insert 8 x Dowels (H1)
into Left & Right Side
Panels (P3 & P4) and
Dividers (P5 & P6).
Attach Bottom Panel (P2)
to Left & Right Side
Panels (P3 & P4) and
Dividers (P5 & P6) with 8 x Long
Screws (H2) by tightening with the Phillips Head Screwdriver.
(P12)
(P2)
(P4)
(P6)
(P5)
(P3)
Phillips Head
Screwdriver
4 x Cam Bolts
(H3)
x2
8 x Dowels
(H1)
You will need
Step 5
Phillips Head
Screwdriver
8 x Long
Screws (H2)
H2
H3
H3
H2
H2
H2
H2
H2
H2
H2
H1
H1
H1
H1

Insert 4 x Dowels (H1) into Rails (P11 x 2). Insert 4 x Cam Nuts (H4) into Rails (P11 x 2). Rotate the
nuts so the arrows point towards the incoming bolts. Attach Rails (P11 x 2) to Rails (P12 x 2)
by tightening all nuts with the Phillips Head Screwdriver.
You will need
Step 8
fantasticfurniture.com.au Page 8
Insert 8 x Cam Nuts (H4) into Rails (P12 x 2). Rotate the nuts so the arrows
point towards the incoming bolts. Attach Rails (P12 x 2) to Bottom
Panel (P2) by tightening all nuts with the Phillips Head Screwdriver.
8 x Cam Nuts
(H4)
(P12)
(P12)
(P12)
(P12)
(P2)
(P11)
(P11)
(P11)
(P11)
Phillips Head
Screwdriver
You will need
Step 7
Phillips Head
Screwdriver
H1
H1
H1
H1
H4
H4
H4
H4
H4
H4
H4
H4
4 x Cam Nuts
(H4)
4 x Dowels
(H1)

You will need
Step 9
You will need
Step 10A
fantasticfurniture.com.au Page 9
8 x Small
Screws (H5)
Attach 4 x Hinges (H6) and 2 x Handles (H10) to Doors (P9 x 2)
with 8 x Small Screws (H5) and 4 x Handle Screws (H11) as shown
by tightening with the Phillips Head Screwdriver.
Hammer
6 x Plastic
Glides (H9)
4 x Hinge
(H6)
Secure 6 x Plastic Glides (H9) to the bottom of Rails (P11 x 2 & P12 x 2) as shown
using the Hammer.
Phillips Head
Screwdriver
(P12)
(P12)
(P11)
(P11)
(P9 x 2)
2 x Handles
(H10)
4 x Handle
Screws (H11)
H9
H9
H9
H9
H9
H9
H6
H6
H6
H6
H5H5
H5H5
H5H5
H10
H11
H11

Secure Doors (P9 x 2, P10) to the main unit by attaching the other end of the
4 x Hinges (H6) and 2 x Hinges (H12) with 24 x Small Screws (H5) as shown.
Tighten with a Phillips Head Screwdriver.
You will need
Step 11
You will need
Step 10B
Attach 2 x Hinges (H12) and 1 x Handle (H10) to Door (P10) with 4 x Small Screws (H5) and
2 x Handle Screws (H11) as shown by tightening with the Phillips Head Screwdriver.
fantasticfurniture.com.au Page 10
Phillips Head
Screwdriver
(P10)
(P9)
(P3)
(P6)
(P4)
(P9)
(P10)
H5
H5
H5 H12
H12
H6
H6
H5
H5
H5 H5 H5 H5
H5
H5
H12
H10
H11
H11
H12
H12
4 x Small
Screws (H5)
Phillips Head
Screwdriver
1 x Handle
(H10)
2 x Handle
Screws (H11)
2 x Hinges
(H12)
24 x Small
Screws (H5)