fantastic furniture STAR WARS KIDS SEAT DEATH STAR User manual

Version 1.0
www.fantasticfurniture.com.au
STAR WARS KIDS SEAT
TWO PEOPLE
REQUIRED
DEATH STAR

ENJOY
Your purchase from
Australia's Best Value Furniture Store
www.fantasticfurniture.com.au PAGE 2
WARNING: Weight Placed On Seat Not To
Exceed 40kg. Do Not Stand On This Product. Do
Not Place Weight On Only The Edge Of The Seat.

Assembly checklist
Useful Information
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! The most commom mistakes made during assembly are using the wrong hardware or getting
components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasterners. Check the product care label or website for
product care instructions.
! If you are having any difficulties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
Read through the instructions carefully
before you begin. Make sure you have all the required tools.
Never use power tools unless instructed.
Identify and lay out all of the components
before you begin assembly. Unless instructed, do not fully tighten screws
until the item is fully assembled.
www.fantasticfurniture.com.au PAGE 3

www.fantasticfurniture.com.au PAGE 4
What you need
to assemble the product
Other tools you need
Philips head screwdriver.
Parts list
Box 1: Stool Top (P1); Support Leg (P2);
All Hardware.
4 x LEVELER 19mm
(H3)
16 x SCREW
25mm
(H1)
4 x BLACK PVC
BRACKET (H2)
0 10 20 30 40 50 60 70 80 90 100
mm
Hardware list
Seat Top (P1)
Support Leg 4pcs
(P2)

www.fantasticfurniture.com.au PAGE 5
Step 1
Step 2
You will need
4 x Leveler 19mm
(H3)
Philips Head
Screwdriver
- Insert 4 x support legs (P2) into the PVC bracket (H2) by turning clockwise to
tighten the support legs.
- Stick 4 x levelers (H3) to bottom of the support legs.
H1H1 H1
H1
H2
16 x Screw 25mm
(H1) 4 x PVC Bracket (Black) (H2)
- Place the seat top (P1) face down on a soft, flat and dry surface.
- Attach black brackets (H2) to panel (P1) with 16 x screws (H1) using a philips head
screwdriver.
Printed side face
down on soft surface
You will need
P2
P2
P2 P2
H3
H3
H3
H3
P2
H3
H2
H2
H2
H2
P1

www.fantasticfurniture.com.au PAGE 6
Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.