fantastic furniture TOKYO User manual

Assembly Instructions
TOKYO BED DOUBLE
2 PEOPLE REQUIRED

Side Rails
(P3)
Bed head
(P1)
Center Rail
(P5)
2 x Head/Foot Rail
(P4)
Bed Foot
(P2)
Side Rails
(P3)
WHAT YOU NEED
To assemble the body
Allen Key provided
13 x Long Plastic
Connectors
(P7)
26 x Short Plastic
Connectors
(P6)
26 x Fantastic Furniture
ComfortSlats
(P8)
Please make sure you have all these parts before you start. Page 1
8 x Long Bolts
(H1)
4 x Nylon Nuts
(H2)
8 x Short Bolts
(H3)
1 x Spanner

Attach one Side Rail (P3) to the Bed Head (P1) with 2 x Short Bolts (H3). Do not fully tighten Bolts.
Step 1
1 x Allen Key
Step 2
Attach one Side Rail (P3) to the Bed/Foot (P2) with 2 x Short Bolts (H3). Leave bolt loose. Page 2
1 x Allen Key
2.
1.
1. 2.
2 PEOPLE REQUIRED
2 PEOPLE REQUIRED
You will need
2 x Short Bolts
(H3)
You will need
You will need
2 x Short Bolts
(H3)

Attach the other Side Rail (P3) to the Bed Head and Bed/Foot with 4 x Short Bolts (H3) in the
upper hole. Leave bolts loose.
Step 3
1 x Allen Key
Step 4
Attach two Head/Foot Rail (P4) to the Side Rail (P3) with 4 x Long Bolts
(H1) in the upper holes. Leave bolts loose.
Page 3
1 x Allen Key
2 PEOPLE REQUIRED
You will need
4 x Short Bolts
(H3)
You will need
4 x Long Bolts
(H1)
1.
2.

You will need
4 x Long Bolts
(H1)
Attach the Center Rail (P5) to the Head?Foot Rail (P4) with 4 x Long Bolts (H1) and 4 x Nut (H2)
in the upper holes. Leave bolts loose.
Step 5
1 x Allen Key
Step 6
Page 4
4 x Nylon nut
(H2)
YOU WILL NEED
13 x Long Plastic
Connectors
(P7)
26 x Short Plastic
Connectors
(P6)
26 x Fantastic Furniture
ComfortStats
(P8)
Push 26 x Short Plastic Connectors (P6) firmly
onto 26 x Fantastic Furniture ComfortSlats (P8).
Then push 26 x Fantastic Furniture ComfortStats
(P8) firmly onto 13 x Long Plastic Connectors (P7).
(P6) (P6)
(P8) (P8) (P7)
1 x Spanner

Place the slat in position then push down on the
center of the slat to flatten out the slat. Make sure the
plastic prong lines up with the hole. Then push firmly.
Step 7C
Page 5
Step 7A
Step 7B
Repeat the same process for the other end of
the slat.
Then push down on the center of the Long Plastic Connector

Page 6
The job is now complete !
In the interest of our environment
Please dispose of all packaging thoughtfully
IMPORTANT : Fully tighten all bolts on bed.